SPS-9130VW-1T1RG

Optoway SPS-9130VW-2TG FEATURES DESCRIPTION SPS-9130VW-2TG 1 *********************************************************************************************************************************************************************** (RoHS Compliant) 1310 nm / 3 Gb/s Medium Power Dual Optical SM Digital Diagnostic Transmitter ********************************************************************************************************************************************************************** l SMPTE 297-2006 Compatible l Speed from 50 Mbps to 3Gbps with up to 30 km Single-mode Fiber l D istance up to 30 km for 3G-SDI l Support Video Pathological Patterns for SD-SDI, HD-SDI and 3G-SDI l D ual Transmitter with Duplex LC l Based on Industry Standard SFP l SFF-8472 Digital Diagnostic Function l Two Independent TTL Laser Disable Input l Single +3.3 V Power Supply l RoHS-6 Compliant l 0 to 70oC Operation l Hot Pluggable l Class 1 Laser International Safety Standard IEC-60825 Compliant The SPS-9130VW-2TG is a dual channel optical single mode transmitter module designed to transmit optical serial digital signals as defined in SMPTE 297-2006. It supports from 50 Mbps to 3 Gbps and is specifically designed for transmitted the SMPTE 259M, SMPTE 344M, SMPTE 292M and SMPTE 424M SDI pathological patterns. It is with the SFP 20-pin connector to allow hot plug capability. Digital diagnostic functions are available via an I2C. It is with two independent 1310 nm laser transmitters. Each transmitter can transmit signal from 50 Mbps to 3 Gbps with up to 30 km of single-mode fiber when using the SPS-9110VW-2RG as the receiver. A maximum distance of 30 km is achievable with 3Gbps pathological signals. LASER SAFETY This single mode transceiver is a Class 1 laser product. It complies with IEC-60825 and FDA 21 CFR 1040.10 and 1040.11. The transceiver must be operated within the specified temperature and voltage limits. The optical ports of the module shall be terminated with an optical connector or with a dust plug. APPLICATIONS l SMPTE 297-2006 Compliant Electrical-to-Optical Interfaces l High-density Video Routers ORDER INFORMATION P /No. Type TX λ Power (nm) (dBm) 50 to 3000 1310 DFB 0 to -5 Bit Rate (Mb/s) Bit Rate (Mb/s) TX λ (nm) Power (dBm) 0 to -5 0 to -5 1260/1620 0 to -20 1260/1620 0 to -20 RX λ (nm) Sen. (dBm) LC SFP with DMI RX λ Sen. (nm) (dBm) 1260/1620 0 to -20 Package Package Temp (oC) 0 to 70 Temp (oC) 0 to 70 0 to 70 0 to 70 0 to 70 RoHS Compliant Yes RoHS Compliant Yes Yes Yes Yes SPS-9130VW-2TG P /No. 2-TX Type RELATED PRODUCTS SPS-9110VW-2RG 2-RX SPS-9130VW-1TG 1-TX SPS-9110VW-1RG 1-RX SPS-9130VW-1T1RG 1-TX+1-RX 50 to 3000 50 to 3000 1310 DFB 50 to 3000 50 to 3000 1310 DFB LC SFP with DMI LC SFP with DMI LC SFP with DMI LC SFP with DMI LINK DISTANCE Transmitter SPS-9130VW-2TG or SPS-9130VW-1TG or SPS-9130VW-1T1RG Receiver SPS-9110VW-2RG or SPS-9110VW-1RG or SPS-9130VW-1T1RG SDI 3 G-SDI HD-SDI SD-SDI Bit Rate 2.97Gbps 1.485Gbps 270Mbos Max. Link Distance (km) 30 30 30 *********************************************************************************************************************************************************************** OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303 Tel: 886-3-5979798 Fax: 886-3-5979737 E-mail: sales@optoway.com.tw http: // www.optoway.com.tw 1/1/2009 V1.0 Optoway Absolute Maximum Ratings Absolute Maximum Ratings Parameter Storage Temperature O perating Case Temperature P ower Supply Voltage E SD Tolerance on all pins R elative Humidity Symbol Tstg Tc Vcc --Min -40 -20 0 5 Max 85 85 4 1 95 Units o C o C V KV HBM % RH SPS-9130VW-2TG 2 *********************************************************************************************************************************************************************** Exposure to absolute maximum rating conditions for extended periods may affect device reliability. Notes non-condensing R ecommended Operating Conditions Parameter Symbol P ower Supply Voltage Vcc O perating Case Temperature Tc B aud Rate P ower Supply Current Icc Min 3.13 0 50 Typ 3.3 200 Max 3.47 70 3000 300 Units / Notes V o C Mb/s mA Transmitter Specifications (0 oC < Tc < 70 oC, 3.13V < Vcc < 3.47V) Parameter Optical O ptical Transmit Power Output Center Wavelength Output Spectrum Width Side Mode Suppression Ratio E xtinction Ratio R elative Intensity Noise O ptical Rise Time / Fall Time Symbol Po λ ∆λ SMSR ER RIN tr / tf Min -5 1260 --30 5 Typ -2 1310 Max 0 1360 1 Units dBm nm nm dB dB dB/Hz ps ps ps ns mVp-p V V V V Notes 1 -20 dB width 7.5 -120 135 270 800 1.5 2, SMPTE 424M 2, SMPTE 292M 2, SMPTE 344M 2, SMPTE 259M AC coupled input TX Output Enabled TX Ouput Disabled E lectrical D ifferential Input Voltage D isable Input Voltage -- Low D isable Input Voltage -- High SCL, SDA 1. 2. V IH - VIL VTDIS,L VTDIS,H V OH V OL 200 0 2 .0 2 .5 0 1200 0 .8 Vcc+0.3 Vcc+0.3 0 .5 Output power is power coupled into a 9/125 µm single mode fiber. 20% to 80%, unfiltered. MODULE DEFINITION Module Definition 4 PIN 5 SCL PIN 6 SDA Interpretation by Host Serial module definition protocol Module Definition 4 specifies a serial definition protocol. For this definition, upon power up, SCL and SDA appear as no connector (NC). When the host system detects this condition, it activates the serial protocol. The protocol uses the 2-wire serial CMOS E2PROM protocol of the ATMEL AT24C01A/02/04 family of components. *********************************************************************************************************************************************************************** OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303 Tel: 886-3-5979798 Fax: 886-3-5979737 E-mail: sales@optoway.com.tw http: // www.optoway.com.tw 1 /1/2009 V1.0 Optoway CONNECTION DIAGRAM TX1_DIS TX1TX1+ Vee Vcc TX1 Vcc TX2 Vee NC NC Vee Vee NC NC Vee SCL SDA Vee TX2+ TX2TX2_DIS SPS-9130VW-2TG 3 *********************************************************************************************************************************************************************** PIN 1 2 3 4 5 6 7 8 9 10 Name Vee NC NC Vee SCL SDA Vee TX2+ TX2TX2_DIS Function Signal Ground No Connection No Connection Signal Ground Serial I2C Clock Serial I2C Data Signal Ground Positive Transmitter Data In (2) Negative Transmitter Data In (2) Transmitter Disable (2) Notes AC coupled differential lines with 100 ohm differential termination inside the module Internal 4.7 kΩ pull-up. The bias current and modulation current are turned off if TX2_DIS = HIGH. 11 12 13 14 15 16 17 18 19 20 Vee NC NC Vee Vcc TX2 Vcc TX1 Vee TX1+ TX1TX1_DIS Signal Ground No Connection No Connection Signal Ground Power Supply (2) Power Supply (1) Signal Ground Positive Transmitter Data In (1) Negative Transmitter Data In (1) Transmitter Disable (1) +3.3V±5%, Internal connected AC coupled differential lines with 100 ohm differential termination inside the module Internal 4.7 kΩ pull-up. The bias current and modulation current are turned off if TX1_DIS = HIGH. *********************************************************************************************************************************************************************** OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303 Tel: 886-3-5979798 Fax: 886-3-5979737 E-mail: sales@optoway.com.tw http: // www.optoway.com.tw 1 /1/2009 V1.0 Optoway RECOMMENDED CIRCUIT SCHEMATIC 1 VCC 3.3V 2 3 10K I2C CLK I2C DA TA TD + Re-Clocker TD TX2_DIS 100Ω D ifferential 10K 4 5 6 7 8 9 10 Vee NC NC Vee SCL SDA Vee TX2 + TX2 TX2_DIS TX1_DIS TX1 TX1 + Vee Vcc_TX1 Vcc_TX2 Vee NC NC Vee 20 19 18 17 16 15 14 13 12 11 100nF 10uF 100nF 10uF TX1_DIS SPS-9130VW-2TG 4 *********************************************************************************************************************************************************************** TD 100Ω D ifferential TD + 1uH 1uH 100nF 10uF VCC 3.3V Re-Clocker 1. Consult the Chipset manufacturer’s applications information for biasing required for TX outputs. Some chipset outputs are internally biased and may not need external bias resistor. PACKAGE DIAGRAM (Units in mm) *********************************************************************************************************************************************************************** OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303 Tel: 886-3-5979798 Fax: 886-3-5979737 E-mail: sales@optoway.com.tw http: // www.optoway.com.tw 1 /1/2009 V1.0 Optoway REVISION HISTORY Version 1 .0 Initial datasheet SPS-9130VW-2TG 5 *********************************************************************************************************************************************************************** Subject Release Date 2009/1/1 *********************************************************************************************************************************************************************** OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303 Tel: 886-3-5979798 Fax: 886-3-5979737 E-mail: sales@optoway.com.tw http: // www.optoway.com.tw 1 /1/2009 V1.0