TRM-7000

Optoway TRM-7000 / TRM-7000C 5V / 850 nm / 1.25 Gbps OPTICAL MULTI-MODE TRANSCEIVER FEATURES l l l l l l l l l l l l TRM-7000 ****************************************************************************************************************************************************************************** ***************************************************************************************************************************************************************************** DESCRIPTION Duplex SC Multi-Mode Transceiver Compliant with IEEE-802.3z 1000BASE-SX Industry Standard 1 x 9 Footprint 850 nm VCSEL Transmission 0 to 70oC Operating Temperature Single +5 V Power Supply 300 meter with 62.5/125 µm MMF 500 meter with 50/125 µm MMF PECL Signal Detection Output (TRM-7000) TTL Signal Detection Output (TRM-7000C) Wave Solderable and Aqueous Washable Class 1 Laser International Safety Standard IEC 60825 Compliant The TRM-7000 series multi-mode transceivers is low power, high performance module for bi-directional serial optical data communications such Gigabit Ethernet and Fiber channel This module is designed for multi-mode fiber and operates at a nominal wavelength of 850 nm. The transmitter section uses a multiple quantum well VCSEL and is a class 1 laser compliant according to International Safety Standard IEC 60825. The receiver section uses an integrated GaAs detector preamplifier (IDP) mounted in an optical header and a limiting post-amplifier IC. A PECL logic interface simplifies interface to external circuitry. LASER SAFETY This single mode transceiver is a Class 1 laser product. It complies with IEC 60825 and FDA 21 CFR 1040.10 and 1040.11. The transceiver must be operated within the specified temperature and voltage limits. The optical ports of the module shall be terminated with an optical connector or with a dust plug APPLICATIONS l Switch to Switch Interface l High Speed Interface for File Servers l High Performance Desktops ORDER INFORMATION Distance Wavelength Voltage Connector (m) (nm) (V) TRM-7000-EM 300 / 500* 850 5 SC TRM-7000C-EM 300 / 500* 850 5 SC TRM-7100-EM 300 / 500* 850 3.3 SC TRM-7100C-EM 300 / 500* 850 3.3 SC P/No. Temp. (oC) 0 to 70 0 to 70 0 to 70 0 to 70 TX Power RX Sens. (dBm) (dBm) -4 to -9.5 -18 -4 to -9.5 -18 -4 to -9.5 -18 -4 to -9.5 -18 Signal Detection PECL TTL LVPECL LVTTL Case Extended Extended Extended Extended N ote: Distance: 300 m for 62.5/125 µm MMF, 500 m for 50/125 µm MMF **************************************************************************************************************************************************************************** OPTOWAY TECHNOLOGY INC. N o.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303 Tel: 886-3-5979798 Fax: 886-3-5979737 E-mail: sales@optoway.com.tw http: // www.optoway.com.tw 8 /1/2004 V2.0 Optoway Absolute Maximum Ratings Parameter Storage Temperature O perating Temperature Soldering Temperature P ower Supply Voltage Input Voltage Output Current Symbol Tstg Topr --Vcc --Iout Min -40 -10 -.05 GND 0 Max 85 70 260 6 Vcc 30 Units o C o C o C V V mA TRM-7000 Notes ***************************************************************************************************************************************************************************** 10 seconds on leads only Recommended Operating Conditions Parameter P ower Supply Voltage O perating Temperature D ata Rate Symbol Vcc Topr Min 4.75 0 100 Typ 5 1250 Max 5.25 70 Units V o C Mb/s Transmitter Specifications (0oC < Topr < 70oC, 4.75V < Vcc < 5.25V) Parameter Optical O ptical Transmit Power 62.5/125 µm, NA=0.275 Fiber O ptical Transmit Power 50/125 µm, NA=0.20 Fiber Output Center Wavelength Output Spectrum Width E xtinction Ratio Output Eye O ptical Rise Time O ptical Fall Time R elative Intensity Noise T otal Jitter C oupled Power Ratio E lectrical P ower Supply Current D ata Input Current – Low D ata Input Current – High D ifferential Input Voltage D ata Input Voltage – Low D ata Input Voltage -- High Symbol Po Po Min -9.5 -9.5 Typ ----850 ----Max -4 -4 860 0.85 --0.26 0.26 -117 227 Units dBm dBm nm nm dB ns ns dB/Hz ps dB mA µA µA mV V V Notes 830 λ --∆λ ER 9 Compliant with IEEE 802.3z tr tf RIN TJ CPR 9 Icc IIL IIH VIH - VIL VIL - VCC VIH - VCC RMS (σ) 20% to 80% Values 20% to 80% Values 120 -350 350 300 -2.0 -1.1 -1.58 -0.74 1 2 2 1 . Maximum current is specified at Vcc = Maximum @ maximum temperature. 2. These inputs are compatible with 10K, 10KH and 100K ECL and LVPECL inputs. ****************************************************************************************************************************************************************************** OPTOWAY TECHNOLOGY INC. N o.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303 Tel: 886-3-5979798 E-mail: sales@optoway.com.tw Fax: 886-3-5979737 h ttp: // www.optoway.com.tw 8/1/2004 V2.0 Optoway Receiver Specifications (0oC < Topr < 70oC, 4.75 V < Vcc