TRM-7000C-EM

Optoway TRM-7100 / TRM-7100C 3.3V / 850 nm / 1.25 Gbps OPTICAL MULTI-MODE TRANSCEIVER FEATURES l l l l l l l l l l l l TRM-7100 ******************************************************************************************************************************************************************************* ***************************************************************************************************************************************************************************** DESCRIPTION Duplex SC Multi-Mode Transceiver Compliant with IEEE-802.3z 1000BASE-SX Industry Standard 1 x 9 Footprint 850 nm VCSEL Transmission 0 to 70oC Operating Temperature Single +3.3 V Power Supply 300 meter with 62.5/125 µm MMF 500 meter with 50/125 µm MMF LVPECL Signal Detection Output (TRM-7100) LVTTL Signal Detection Output (TRM-7100C) Wave Solderable and Aqueous Washable Class 1 Laser International Safety Standard IEC 60825-1 Compliant The TRM-7100 series multi-mode transceivers is low power, high performance module for bi-directional serial optical data communications such Gigabit Ethernet and Fiber channel This module is designed for multi-mode fiber and operates at a nominal wavelength of 850 nm. The transmitter section uses a multiple quantum well VCSEL and is a class 1 laser compliant according to International Safety Standard IEC 60825-1. The receiver section uses an integrated GaAs detector preamplifier (IDP) mounted in an optical header and a limiting post-amplifier IC. A PECL logic interface simplifies interface to external circuitry. LASER SAFETY This single mode transceiver is a Class 1 laser product. It complies with IEC 60825-1 and FDA 21 CFR 1040.10 and 1040.11. The transceiver must be operated within the specified temperature and voltage limits. The optical ports of the module shall be terminated with an optical connector or with a dust plug APPLICATIONS l Switch to Switch Interface l High Speed Interface for File Servers l High Performance Desktops ORDER INFORMATION Distance Wavelength Voltage Connector (m) (nm) (V) TRM-7000-EM 300 / 500* 850 5 SC TRM-7000C-EM 300 / 500* 850 5 SC TRM-7100-EM 300 / 500* 850 3.3 SC TRM-7100C-EM 300 / 500* 850 3.3 SC P/No. Temp. (oC) 0 to 70 0 to 70 0 to 70 0 to 70 TX Power RX Sens. (dBm) (dBm) -4 to -9.5 -18 -4 to -9.5 -18 -4 to -9.5 -18 -4 to -9.5 -18 Signal Detection PECL TTL LVPECL LVTTL Case Extended Extended Extended Extended N ote: Distance: 300 m for 62.5/125 µm MMF, 500 m for 50/125 µm MMF ***************************************************************************************************************************************************************************** OPTOWAY TECHNOLOGY INC. N o.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303 Tel: 886-3-5979798 Fax: 886-3-5979737 E-mail: sales@optoway.com.tw http: // www.optoway.com.tw 9 /1/2004 V3.0 Optoway Absolute Maximum Ratings Parameter Storage Temperature O perating Temperature Soldering Temperature P ower Supply Voltage Input Voltage Output Current Symbol Tstg Topr --Vcc --Iout Min -40 0 -0.5 GND 0 Max 85 70 260 4.5 Vcc 30 Units o C o C o C V V mA TRM-7100 Notes ***************************************************************************************************************************************************************************** 10 seconds on leads only Recommended Operating Conditions Parameter P ower Supply Voltage O perating Temperature D ata Rate Symbol Vcc Topr Min 3.1 0 100 Typ 3.3 1250 Max 3.5 70 Units V o C Mb/s Transmitter Specifications (0oC < Topr < 70oC, 3.1V < Vcc < 3.5V) Parameter Optical O ptical Transmit Power 62.5/125 µm, NA=0.275 Fiber O ptical Transmit Power 50/125 µm, NA=0.20 Fiber Output Center Wavelength Output Spectrum Width E xtinction Ratio Output Eye O ptical Rise Time O ptical Fall Time R elative Intensity Noise T otal Jitter C oupled Power Ratio E lectrical P ower Supply Current D ata Input Current – Low D ata Input Current – High D ifferential Input Voltage D ata Input Voltage – Low D ata Input Voltage -- High Symbol Po Po Min -9.5 -9.5 Typ ----850 ----Max -4 -4 860 0.85 --0.26 0.26 -117 227 Units dBm dBm nm nm dB ns ns dB/Hz ps dB mA µA µA mV V V Notes 820 λ --∆λ ER 9 Compliant with IEEE 802.3z tr tf RIN TJ CPR 9 Icc IIL IIH VIH - VIL VIL - VCC VIH - VCC RMS (σ) 20% to 80% Values 20% to 80% Values 120 -350 350 300 -2.0 -1.1 -1.58 -0.74 1 2 2 1 . Maximum current is specified at Vcc = Maximum @ maximum temperature. 2. These inputs are compatible with 10K, 10KH and 100K ECL and LVPECL inputs. ***************************************************************************************************************************************************************************** OPTOWAY TECHNOLOGY INC. N o.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303 Tel: 886-3-5979798 E-mail: sales@optoway.com.tw Fax: 886-3-5979737 h ttp: // www.optoway.com.tw 9 /1/2004 V3.0 Optoway Receiver Specifications (0oC < Topr < 70oC, 3.1 V < Vcc < 3.5V) Parameter Optical Sensitivity Maximum Input Power Signal Detect -- Asserted Signal Detect -- Deasserted Signal detect -- Hysteresis Wavelength of Operation E lectrical P ower Supply Current D ata Output Voltage – Low D ata Output Voltage – High Signal Detect Output Voltage -- Low Signal Detect Output Voltage -- High Signal Detect Output Voltage -- Low Signal Detect Output Voltage -- High Symbol --Pin Pa Pd Min --0 ---30 1.0 770 Typ ----------Max -18 ---18 --4.0 860 100 -1.58 -0.74 -1.58 -0.74 0.5 Units dBm dBm dBm dBm dB nm mA V V V V V V TRM-7100 Notes 1 Transition: low to high Transition: high to low ***************************************************************************************************************************************************************************** Icc VOL - VCC VOH - VCC VOL - VCC VOH - VCC VSDL VSDH -2.0 -1.1 -2.0 -1.1 2.0 2 3 3 TRM-7100 TRM-7100C 1 . Minimum sensitivity and saturation levels at BER=1E-12 for a 27-1 PRBS. 2. The current excludes the output load current. 3. These outputs are compatible with 10K, 10KH and 100K ECL and PECL inputs. CONNECTION DIAGRAM Receiver Signal Ground 1 (Rx GND) Receiver Data Out 2 (RD+) Receiver Data Out Bar 3 (RD−) Signal Detect 4 (SD) Receiver Power Supply 5 (Rx Vcc) Transmitter Power Supply 6 (Tx Vcc) Transmitter Data In Bar 7 (TD− ) Transmitter Data In 8 (TD+) Transmitter Signal Ground 9 (Tx GND) N/C TOP VIEW N/C PIN 1 2 3 4 5 6 7 8 9 Symbol R x GND RD+ RD− SD Rx Vcc Tx Vcc T D− TD+ T x GND Notes Directly connect this pin to the receiver ground plane See recommended circuit schematic See recommended circuit schematic Active high on this indicates a received optical signal +3.3V dc power for the receiver section +3.3V dc power for the transmitter section See recommended circuit schematic See recommended circuit schematic Directly connect this plan to the trransmitter ground plane ***************************************************************************************************************************************************************************** OPTOWAY TECHNOLOGY INC. N o.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303 Tel: 886-3-5979798 E-mail: sales@optoway.com.tw Fax: 886-3-5979737 h ttp: // www.optoway.com.tw 9 /1/2004 V3.0 Optoway RECOMMENDED CIRCUIT SCHEMATIC Transceiver TX GND 9 VCC 3.3V TRM-7100 SerDes IC ***************************************************************************************************************************************************************************** 0.1uFTD+ 8 LD Driver 120R 0.1uF TD- 7 Z=50R TD+ LVPECL TDZ=50R TX VCC 6 1uH 10nF 10uF VCC 3.3V 1uH VCC 3.3V RX VCC 5 10nF 10uF R1 SD Level R2 VCC 3.3V SD 4 Post Amp RD- 3 Z=50R R7 RDLVPECL RD+ 2 Z=50R RD+ RX GND 1 CDR or PHY DEVICE For TTL SD Level R1=R2=N.C., R7=100R For PECL SD Level R1=130R, R2=82R, R7=100R The split-load terminations for ECL signals need to be located at the input of devices receiving those ECL signals. The power supply filtering is required for good EMI performance. Use short tracks from the inductor L1/L2 to the module Rx Vcc and Tx Vcc. A GND plane under the module is required for good EMI and sensitivity performance. PACKAGE DIAGRAM Units in mm TX OPTICAL RX OPTICAL TRM-7100-EM / TRM-7100C-EM N ote: Specifications subject to change without notice. ***************************************************************************************************************************************************************************** OPTOWAY TECHNOLOGY INC. N o.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303 Tel: 886-3-5979798 E-mail: sales@optoway.com.tw Fax: 886-3-5979737 h ttp: // www.optoway.com.tw 9 /1/2004 V3.0