TRS-5120AG

Optoway FEATURES l l l l l l l l l l l l l l TRS-5120G 1 *********************************************************************************************************************************************************************** TRS-5120G / TRS-5120TG / TRS-5120FG / TRS-5120CG / TRS-5120CTG / TRS-5120CFG 3.3V / 1310 nm / 622 Mbps RoHS Compliant Optical Single-Mode Transceiver ********************************************************************************************************************************************************************* DESCRIPTION D uplex SC Single Mode Transceiver: TRS-5120G D uplex ST Single Mode Transceiver: TRS-5120TG D uplex FC Single Mode Transceiver: TRS-5120FG Compliant with SONET OC-12 IR-1 / SDH STM-4 (S-4.1) Industry Standard 1 x 9 Footprint Single +3.3 V Power Supply RoHS Compliant PECL Signal Detection Output: TRS-5120G TTL Signal Detection Output: TRS-5120CG 0 to 70oC Operation: TRS-5120G -40 to 85oC Operation: TRS-5120AG LED Multisourced 1 x 9 Transceiver Interchangeable Wave Solderable and Aqueous Washable Class 1 Laser International Safety Standard IEC-60825 Compliant The TRS-5120G series single mode transceivers is low power, high performance module for bi-directional serial optical data communications such as SONET OC-12 IR-1 / SDH STM-4 (S-4.1). This module is designed for single mode fiber and operates at a nominal wavelength of 1310 nm. The transmitter section uses a multiple quantum well laser and is a class 1 laser compliant according to International Safety Standard IEC-60825. The receiver section uses an integrated InGaAs detector preamplifier (IDP) mounted in an optical header and a limiting post-amplifier IC. A PECL logic interface simplifies interface to external circuitry. LASER SAFETY This single mode transceiver is a Class 1 laser product. It complies with IEC-60825 and FDA 21 CFR 1040.10 and 1040.11. The transceiver must be operated within the specified temperature and voltage limits. The optical ports of the module shall be terminated with an optical connector or with a dust plug. APPLICATIONS l ATM 622 Mbps Links l SONET/SDH Equipment Interconnect l Fibre Channel 532 Mbps Links ORDER INFORMATION P/No. TRS-5120G TRS-5120AG Bit Rate SONET Distance Wavelength Voltage Package Temp. TX Power RX Sens. RoHS (Mb/s) /SDH (km) (nm) (V) (oC) (dBm) (dBm) Compliant 622 IR-1 / S-4.1 20 1310 3.3 1X9 SC/ST/FC 0 to 70 -8 to -14 -28 Y 622 IR-1/S-4.1 20 1310 3.3 1X9 SC/ST/FC -40 to 85 -8 to -14 -28 Y Absolute Maximum Ratings Parameter Storage Temperature O perating Temperature Soldering Temperature P ower Supply Voltage Input Voltage Output Current Symbol Tstg Topr --Vcc --Iout Min -40 0 -40 0 GND 0 Max 85 70 85 260 4.5 Vcc 30 Units o C o C o Notes TRS-5120G TRS-5120AG 10 seconds on leads only C V V mA Recommended Operating Conditions Parameter P ower Supply Voltage O perating Temperature D ata Rate P ower Supply Current Symbol Vcc Topr Min 3.1 0 -40 50 Typ 3.3 Max 3.5 70 85 240 Units V o C / TRS-5120G o C / TRS-5120AG Mb/s mA 622 Icc ********************************************************************************************************************************************************************** OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303 Tel: 886-3-5979798 Fax: 886-3-5979737 E-mail: sales@optoway.com.tw http: // www.optoway.com.tw 10/1/2005 V2.0 Optoway Transmitter Specifications (0oC < Topr < 70oC, 3.1V < Vcc < 3.5V) Parameter Optical O ptical Transmit Power Output Center Wavelength Output Spectrum Width E xtinction Ratio Output Eye O ptical Rise Time O ptical Fall Time R elative Intensity Noise T otal Jitter E lectrical D ata Input Current – Low D ata Input Current – High D ifferential Input Voltage D ata Input Voltage – Low D ata Input Voltage -- High Symbol Min Typ Max Units TRS-5120G Notes 2 *********************************************************************************************************************************************************************** Po -14 ---8 dBm 1 1274 1310 1355 nm λ ----4 nm RMS (σ) ∆λ ER 8.2 ----dB Compliant with Bellcore TR-NWT-000253 and ITU recommendation G.957 tr 1.2 ns 10% to 90% Values tf 1.2 ns 10% to 90% Values RIN -116 dB/Hz TJ 0.55 ns 2 IIL IIH VIH - VIL VIL - VCC VIH - VCC -350 350 300 -2.0 -1.1 -1.58 -0.74 µA µA mV V V 3 3 N otes: 1. Output power is power coupled into a 9/125 µm single mode fiber. 2. Measured with a 223-1 PRBS with 72 ones and 72 zeros. 3. These inputs are compatible with 10K, 10KH and 100K ECL and LVPECL inputs. Receiver Specifications (0oC < Topr < 70oC, 3.1 V < Vcc < 3.5V) Parameter Optical Sensitivity Maximum Input Power Signal Detect -- Asserted Signal Detect -- Deasserted Signal detect -- Hysteresis Wavelength of Operation E lectrical D ata Output Voltage – Low D ata Output Voltage – High Signal Detect Output Voltage -- Low Signal Detect Output Voltage -- High Signal Detect Output Voltage -- Low Signal Detect Output Voltage -- High Symbol --Pin Pa Pd Min ---3 ---40 1.0 1100 -2.0 -1.1 -2.0 -1.1 2.0 Typ ----------Max -28 ---28 --1600 -1.58 -0.74 -1.58 -0.74 0.8 Units dBm dBm dBm dBm dB nm V V V V V V Notes 1 Transition: low to high Transition: high to low VOL - VCC VOH - VCC VOL - VCC VOH - VCC VSDL VSDH 2 2 TRS-5120G TRS-5120CG N otes: 1. Minimum sensitivity and saturation levels at BER1E-10 for a 223-1 PRBS with 72 ones and 72 zeros. 2. These outputs are compatible with 10K, 10KH and 100K ECL and LVPECL outputs. *********************************************************************************************************************************************************************** OPTOWAY TECHNOLOGY INC. N o.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303 Tel: 886-3-5979798 Fax: 886-3-5979737 E-mail: sales@optoway.com.tw http: // www.optoway.com.tw 10/1/2005 V2.0 Optoway CONNECTION DIAGRAM Receiver Signal Ground 1 (Rx GND) Receiver Data Out 2 (RD+) Receiver Data Out Bar 3 (RD−) Signal Detect 4 (SD) Receiver Power Supply 5 (Rx Vcc) Transmitter Power Supply 6 (Tx Vcc) Transmitter Data In Bar 7 (TD− ) Transmitter Data In 8 (TD+) Transmitter Signal Ground 9 (Tx GND) N/C TRS-5120G 3 *********************************************************************************************************************************************************************** TOP VIEW N/C PIN 1 2 3 4 5 6 7 8 9 Symbol R x GND RD+ RD− SD Rx Vcc Tx Vcc T D− TD+ T x GND Notes Directly connect this pin to the receiver ground plane See recommended circuit schematic See recommended circuit schematic Active high on this indicates a received optical signal +3.3V dc power for the receiver section +3.3V dc power for the transmitter section See recommended circuit schematic See recommended circuit schematic Directly connect this plan to the trransmitter ground plane RECOMMENDED CIRCUIT SCHEMATIC The split-load terminations for ECL signals need to be located at the input of devices receiving those ECL signals. The power supply filtering is required for good EMI performance. Use short tracks from the inductor L1/L2 to the module Rx Vcc and Tx Vcc. A GND plane under the module is required for good EMI and sensitivity performance. *********************************************************************************************************************************************************************** OPTOWAY TECHNOLOGY INC. N o.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303 Tel: 886-3-5979798 Fax: 886-3-5979737 E-mail: sales@optoway.com.tw http: // www.optoway.com.tw 10/1/2005 V2.0 Optoway PACKAGE DIAGRAM Units in mm 1) SC Type TRS-5120G 4 *********************************************************************************************************************************************************************** TX OPTICAL RX OPTICAL TRS-5120G / TRS-5120CG / TRS-5120AG / TRS-5120ACG 2) SC Type With Extended Shielding TX OPTICAL RX OPTICAL TRS-5120-EMG / TRS-5120C-EMG / TRS-5120A-EMG / TRS-5120AC-EMG *********************************************************************************************************************************************************************** OPTOWAY TECHNOLOGY INC. N o.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303 Tel: 886-3-5979798 Fax: 886-3-5979737 E-mail: sales@optoway.com.tw http: // www.optoway.com.tw 10/1/2005 V2.0 Optoway 3) ST Type TX OPTICAL TRS-5120G 5 *********************************************************************************************************************************************************************** RX OPTICAL TRS-5120TG / TRS-5120CTG / TRS-5120ATG / TRS-5120ACTG 4) FC Type 12.7 TX OPTICAL RX OPTICAL 2.54*8 20.32 25.4 13.9 10 5.97 10.18 20.32 34.5MAX TRS-5120FG / TRS-5120CFG / TRS-5120AFG / TRS-5120ACFG N ote: Specifications subject to change without notice. *********************************************************************************************************************************************************************** OPTOWAY TECHNOLOGY INC. N o.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303 Tel: 886-3-5979798 Fax: 886-3-5979737 E-mail: sales@optoway.com.tw http: // www.optoway.com.tw 0.7 5 O1.3 13.7 10/1/2005 V2.0