TRS-7010AG

Optoway FEATURES l l l l l l l l l l l l l TRS-7010G 1 ********************************************************************************************************************************************************************** TRS-7010G / TRS-7010TG / TRS-7010FG / TRS-7010CG / TRS-7010CTG / TRS-7010CFG 5V / 1310 nm / 1.25 Gbps RoHS Compliant Optical Single-Mode Transceiver ********************************************************************************************************************************************************************* DESCRIPTION D uplex SC Single Mode Transceiver: TRS-7010G D uplex ST Single Mode Transceiver: TRS-7010TG D uplex FC Single Mode Transceiver: TRS-7010FG Compliant with IEEE-802.3z Gigabit Ethernet Industry Standard 1 x 9 Footprint 0 to 70oC Operating : TRS-7010G -40 to 85oC Operating : TRS-7010AG Single +5 V Power Supply RoHS Compliant PECL Signal Detect Output: TRS-7010G TTL Signal Detect Output: TRS-7010CG Wave Solderable and Aqueous Washable Class 1 Laser International Safety Standard IEC 60825 Compliant The TRS-7010G series single mode transceivers is low power, high performance module for bi-directional serial optical data communications such Gigabit Ethernet and Fibre Channel. This module is designed for single mode fiber and operates at a nominal wavelength of 1310 nm. The transmitter section uses a multiple quantum well laser and is a class 1 laser compliant according to International Safety Standard IEC 60825. The receiver section uses an integrated InGaAs detector preamplifier (IDP) mounted in an optical header and a limiting post-amplifier IC. A PECL logic interface simplifies interface to external circuitry. LASER SAFETY This single mode transceiver is a Class 1 laser product. It complies with IEC 60825 and FDA 21 CFR 1040.10 and 1040.11. The transceiver must be operated within the specified temperature and voltage limits. The optical ports of the module shall be terminated with an optical connector or with a dust plug. APPLICATIONS l Switch to Switch Interface l High Speed Interface for File Servers l High Performance Desktops ORDER INFORMATION P /No. Bit Rate (Mb/s) 1250 1250 1000 BASE LX / LH LX / LH D istance Wavelength Voltage (km) (nm) (V) 10 10 1310 1310 5 5 Package Temp. (oC) TX Power (dBm) -3 to -9 -3 to -9 RX Sens. RoHS (dBm) Compliant -21 -21 Y Y TRS-7010G TRS-7010AG 1X9 SC/ST/FC 0 to 70 1X9 SC/ST/FC -40 to 85 Note: TRS-XXXXXFG for FC duplex transceiver, TRS-XXXXXTG for ST duplex transceiver, TRS-XXXXX-EMG for SC duplex transceiver with extended EMI shielding, TRS-XXXXXCXG for transceiver with TTL signal detection output. Absolute Maximum Ratings Parameter Storage Temperature Operating Temperature Soldering Temperature Power Supply Voltage Input Voltage Output Current Symbol Tstg Topr --Vcc --Iout Min -40 0 -40 0 GND 0 Max 85 70 85 260 6 Vcc 30 Units o C o C o Notes TRS-7010G TRS-7010AG 10 seconds on leads only C V V mA Recommended Operating Conditions Parameter Power Supply Voltage Operating Temperature Data Rate Power Supply Current Symbol Vcc Topr Min 4.75 0 -40 Typ 5 Max 5.25 70 85 1300 240 Units V o C / TRS-7010G o C / TRS-7010AG Mb/s mA Icc 1250 180 *********************************************************************************************************************************************************************** OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303 Tel: 886-3-5979798 Fax: 886-3-5979737 E-mail: sales@optoway.com.tw http: // www.optoway.com.tw 10/1/2005 V4.0 Optoway Transmitter Specifications (0 oC < Topr < 70 oC, 4.75V < Vcc < 5.25V) Parameter Optical Optical Transmit Power Output Center Wavelength Output Spectrum Width Extinction Ratio Output Eye Optical Rise Time Optical Fall Time Relative Intensity Noise Total Jitter Electrical Data Input Current – Low Data Input Current – High Differential Input Voltage Data Input Voltage – Low Data Input Voltage -- High Symbol Min Typ --1310 ----Max -3 1355 2.5 --0.26 0.26 -120 0.227 Units dBm nm nm dB ns ns dB/Hz ns µA µA mV V V Po -9 1270 λ --∆λ ER 9 Compliant with IEEE 802.3z tr tf RIN TJ IIL IIH V IH - V IL VIL - V CC VIH - V CC -350 350 300 -2.0 -1.1 -1.58 -0.74 TRS-7010G Notes 1 RMS (σ) 2 *********************************************************************************************************************************************************************** 20% to 80% Values 20% to 80% Values 2 3 3 Notes: 1. Output power is power coupled into a 9/125 µm single mode fiber. 2. Measured with a 27-1 PRBS. 3. These inputs are compatible with 10K, 10KH and 100K ECL and LVPECL inputs. Receiver Specifications (0oC < Topr < 70oC, 4.75 V < Vcc < 5.25V) Parameter Optical Sensitivity Maximum Input Power Signal Detect -- Asserted Signal Detect -- Deasserted Signal detect -- Hysteresis Wavelength of Operation Electrical Data Output Voltage – Low Data Output Voltage – High Signal Detect Output Voltage -- Low Signal Detect Output Voltage -- High Signal Detect Output Voltage -- Low Signal Detect Output Voltage -- High Symbol --Pin Pa Pd Min ---3 ---31 1.0 1100 -2.0 -1.1 -2.0 -1.1 2 .0 Typ ----------Max -21 ---21 --1600 -1.58 -0.74 -1.58 -0.74 0.5 Units dBm dBm dBm dBm dB nm V V V V V V Notes 1 Transition: low to high Transition: high to low VOL - VCC VOH - VCC VOL - VCC VOH - VCC VSDL VSDH 2 2 TRS-7010G TRS-7010CG Notes: 1. Minimum sensitivity and saturation levels at BER=1E-12 for a 27-1 PRBS. 2. These outputs are compatible with 10K, 10KH and 100K ECL and PECL outputs. *********************************************************************************************************************************************************************** OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303 Tel: 886-3-5979798 Fax: 886-3-5979737 E-mail: sales@optoway.com.tw http: // www.optoway.com.tw 10/1/2005 V4.0 Optoway CONNECTION DIAGRAM Receiver Signal Ground 1 (Rx GND) Receiver Data Out 2 (RD+) Receiver Data Out Bar 3 (RD−) Signal Detect 4 (SD) Receiver Power Supply 5 (Rx Vcc) Transmitter Power Supply 6 (Tx Vcc) Transmitter Data In Bar 7 (TD− ) Transmitter Data In 8 (TD+) Transmitter Signal Ground 9 (Tx GND) N/C TRS-7010G 3 *********************************************************************************************************************************************************************** TOP VIEW N/C P IN 1 2 3 4 5 6 7 8 9 Symbol Rx GND RD+ RD− SD R x Vcc T x Vcc TD− TD+ Tx GND Notes Directly connect this pin to the receiver ground plane See recommended circuit schematic See recommended circuit schematic Active high on this indicates a received optical signal +5V dc power for the receiver section +5V dc power for the transmitter section See recommended circuit schematic See recommended circuit schematic Directly connect this plan to the trransmitter ground plane RECOMMENDED CIRCUIT SCHEMATIC Transceiver TX GND 0.1uF LD Driver 100R 0.1uF 6 10nF 5 10nF SD RDRD+ 4 3 Z=50R 2 Z=50R RX GND 1 R4 R6 RD+ 10uF R2 VCC 5V R3 POST Amp R5 RDP CL E VCC 5V 10uF 1uH VCC 5V VCC 5V 1uH R1 RX VCC SD Level TD+ TD9 8 Z=50R 7 Z=50R TDTD+ PE CL SerDes IC VCC 5V TX VCC CDR or PHY DEVICE For TTL SD Level R1=R2=N.C. ,R3=R5=82R ,R4=R6=130R For PECL SD Level R1=R3=R5=82R ,R2=R4=R6=130R The split-load terminations for ECL signals need to be located at the input of devices receiving those ECL signals. The power supply filtering is required for good EMI performance. Use short tracks from the inductor L1/L2 to the module Rx Vcc and Tx Vcc. A GND plane under the module is required for good EMI and sensitivity performance. *********************************************************************************************************************************************************************** OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303 Tel: 886-3-5979798 Fax: 886-3-5979737 E-mail: sales@optoway.com.tw http: // www.optoway.com.tw 10/1/2005 V4.0 Optoway PACKAGE DIAGRAM Units in mm TRS-7010G 4 *********************************************************************************************************************************************************************** 1) SC Type With Extended Shielding TX OPTICAL RX OPTICAL TRS-7010-EMG / TRS-7010C-EMG / TRS-7010A-EMG / TRS-7010AC-EMG 2) ST Type TX OPTICAL RX OPTICAL TRS-7010TG / TRS-7010CTG / TRS-7010ATG / TRS-7010ACTG *********************************************************************************************************************************************************************** OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303 Tel: 886-3-5979798 Fax: 886-3-5979737 E-mail: sales@optoway.com.tw http: // www.optoway.com.tw 10/1/2005 V4.0 Optoway 3) FC Type 12.7 TRS-7010G 5 *********************************************************************************************************************************************************************** TX OPTICAL RX OPTICAL 2.54*8 20.32 25.4 13.9 10 5.97 10.18 20.32 34.5MAX TRS-7010FG / TRS-7010CFG / TRS-7010AFG / TRS-7010ACFG Note: Specifications subject to change without notice. *********************************************************************************************************************************************************************** OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303 Tel: 886-3-5979798 Fax: 886-3-5979737 E-mail: sales@optoway.com.tw http: // www.optoway.com.tw 10/1/2005 V4.0 0.7 5 O1.3 13.7