TRSL-5140G

Optoway FEATURES l l l l l l l l l l l l l l TRSL-5140G 1 *********************************************************************************************************************************************************************** TRSL-5140G / TRSL-5140CG / TRSL-5140AG / TRSL-5140ACG 3.3V / 1310 nm / 622 Mbps RoHS Compliant SFF LC SINGLE-MODE TRANSCEIVER ********************************************************************************************************************************************************************** DESCRIPTION D uplex LC Single Mode Transceiver SONET OC-12 LR-1 / SDH STM-4 (L-4.1) Compliant Small Form Factor, RJ-45 size, 2X5 pin Package 1310 nm LD Transmitte LVPECL Signal Input / Output LVTTL Transmitter Disable Input LVPECL Signal Detection Output : TRSL-5140G LVTTL Signal Detection Output : TRSL-5140CG Single +3.3 V Power Supply RoHS Compliant 0 to 70oC Operation: TRSL-5140G -40 to 85oC Operation: TRSL-5140AG Wave Solderable and Aqueous Washable Class 1 Laser International Safety Standard IEC-60825 Compliant The TRSL-5140G series single mode transceivers is small form factor, low power, high performance module for bi-directional serial optical data communications such as SONET OC-12 LR-1 / SDH STM-4 (L-4.1) and Fiber Channel. This module is designed for single mode fiber and operates at a nominal wavelength of 1310 nm. A guaranteed minimum optical link budget of 25 dB is offered which can correspond to a link distance of over 40 km (assuming worst case fiber loss of 0.45 dB/km). The transmitter section uses a multiple quantum well laser and is a class 1 laser compliant according to International Safety Standard IEC-60825. The receiver section uses an integrated InGaAs detector preamplifier (IDP) mounted in an optical header and a limiting post-amplifier IC. A PECL logic interface simplifies interface to external circuitry. APPLICATIONS l ATM 622 Mbps Links l SONET/SDH Equipment Interconnect l Fiber Channel 533 Mb/s Links LASER SAFETY This single mode transceiver is a Class 1 laser product. It complies with IEC-60825 and FDA 21 CFR 1040.10 and 1040.11. The transceiver must be operated within the specified temperature and voltage limits. The optical ports of the module shall be terminated with an optical connector or with a dust plug. Distance (km) 40 40 Wavelength Package (nm) 1310 2X5 LC 1310 DFB 2X5 LC RoHS Temp. TX Power RX Sens. (oC) (dBm) (dBm) Compliant 0 to 70 2 to -3 -28 Yes -40 to 85 2 to -3 -28 Yes ORDER INFORMATION P/No. TRSL-5140G TRSL-5140AG Bit Rate (Mb/s) 622 622 SONET /SDH LR-1/L-4.1 LR-1/L-4.1 Absolute Maximum Ratings Parameter Storage Temperature Operating Temperature Soldering Temperature Power Supply Voltage Input Voltage Output Current Symbol Tstg Topr --Vcc --Iout Min -40 0 -40 0 GND 0 Max 85 70 85 260 4.5 Vcc 30 Units o C o C o Notes TRSL-5140G TRSL-5140AG 10 seconds on leads only C V V mA Recommended Operating Conditions Parameter Power Supply Voltage Operating Temperature Data Rate Power Supply Current Symbol Vcc Topr Min 3.13 0 -40 50 Typ 3.3 Max 3.47 70 85 240 Units / Notes V o C / TRSL-5140G o C / TRSL-5140AG Mb/s mA 622 Icc *********************************************************************************************************************************************************************** OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303 Tel: 886-3-5979798 Fax: 886-3-5979737 E-mail: sales@optoway.com.tw http: // www.optoway.com.tw 1 2/1/2005 V2.0 Optoway Transmitter Specifications (0 oC < Topr < 70 oC, 3.13V < Vcc < 3.47V) Parameter Optical Optical Transmit Power Output Center Wavelength Output Spectrum Width Symbol Po λ ∆λ Min -3 1280 --Typ ----Max 2 1345 1.7 1 Units dBm nm nm nm TRSL-5140G Notes 1 2 ********************************************************************************************************************************************************************** RMS (σ)/TRSL-5140 -20 dB width TRSL-5140A Extinction Ratio Output Eye Optical Rise Time Optical Fall Time Relative Intensity Noise Total Jitter Electrical Data Input Current – Low Data Input Current – High Differential Input Voltage Data Input Voltage – Low Data Input Voltage -- High Disable Input Voltage -- Low Disable Input Voltage -- High Shut Off Time for TxDis ER 10 ----dB Compliant with Bellcore GR-253-CORE and ITU recommendation G.957 tr 1 .2 ns tf 1 .2 ns RIN -120 dB/Hz TJ 0.55 ns IIL IIH VIH - VIL V IL - VCC V IH - VCC VTDIS,L VTDIS,H tDIS -350 350 300 -2.0 -1.1 0 Vcc – 1.3 -1.58 -0.74 0 .5 Vcc 1 µA µA mV V V V V ms 10% to 90% Values 10% to 90% Values 2 3 3 TX Output Enabled TX Ouput Disabled Notes: 1. Output power is power coupled into a 9/125 µm single mode fiber. 2. Measured with a 223-1 PRBS with 72 ones and 72 zeros. 3. These inputs are compatible with 10K, 10KH and 100K ECL and PECL inputs. Receiver Specifications (0oC < Topr < 70oC, 3.13V < Vcc < 3.47V) Parameter Optical Sensitivity Maximum Input Power Signal Detect -- Asserted Signal Detect -- Deasserted Signal detect -- Hysteresis Wavelength of Operation Electrical Data Output Voltage – Low Data Output Voltage – High Signal Detect Output Voltage -- Low Signal Detect Output Voltage -- High Signal Detect Output Voltage -- Low Signal Detect Output Voltage -- High Symbol --Pin Pa Pd Min ---5 ---40 1.0 1100 -2.0 -1.1 -2.0 -1.1 2 .0 Typ ----------Max -28 ---28 --1600 -1.58 -0.74 -1.58 -0.74 0 .5 Units dBm dBm dBm dBm dB nm V V V V V V Notes 1 Transition: low to high Transition: high to low V OL - VCC V OH - VCC V OL - VCC V OH - VCC VOL VOH 2 2 TRSL-5140G TRSL-5140CG Notes: 1. Minimum sensitivity and saturation levels at BER=1E-10 for a 223-1 PRBS with 72 ones and 72 zeros. 2. These outputs are compatible with 10K, 10KH and 100K ECL and PECL outputs. *********************************************************************************************************************************************************************** OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303 Tel: 886-3-5979798 Fax: 886-3-5979737 E-mail: sales@optoway.com.tw http: // www.optoway.com.tw 12/1/2005 V2.0 Optoway CONNECTION DIAGRAM TRSL-5140G 3 ********************************************************************************************************************************************************************** P IN 1 2 3 4 5 6 7 8 9 10 MS Symbol VEEr VCC r SD RD− RD+ VCC t VEEt TDis TD+ TDMS Notes Directly connect this pin to the receiver ground plane +3.3V dc power for the receiver section Active high on this indicates a received optical signal. R eceiver Dataout Bar. See recommended circuit schematic Receiver Dataout. See recommended circuit schematic +3.3V dc power for the transmitter section Directly connect this plan to the transmitter ground plane Transmitter Disable. Connect this pin to +3.3V TTL logic “1 ” to disable module To enable module connect to TTL logic low “0” Transmitter Data In. See recommended circuit schematic Transmitter Data In Bar. See recommended circuit schematic Mounting Studs. Connect to Chassis Ground RECOMMENDED CIRCUIT SCHEMATIC Vcc3.3V MICROSTRIP1 Z=50R MICROSTRIP2 Z=5OR 150ohm TDis(LVTTL) TDLVPECL TD+ 150ohm 10 9 8 7 6 1uH Vcc3.3V TDTD+ TDis Veet Vcct 10nF 10uF 1uH 10nF 10uF PHY DEVICE Vcc3.3V Vcc3.3V SFF2X5 1 2 3 4 5 10nF 10uF Veer Vccr SD RDRD+ 130R RD+ Vcc3.3V MICROSTRIP3 Z=50R MICROSTRIP4 Z=5OR SD 82R 130R RD- LVPECL TO LVPECL STAGE 82R 1K Note: 1. 1000 ΩSD Output pull-down resistor required for TRSL-5140G / TRSL-5140AG (LVPECL SD Output) 2. No pull-down resistor required for TRSL-5140CG / TRSL-5140ACG (LVTTL SD Output) 3. Veer and Veet are not internally connected to each other. 4. 50 Ω line pattern and component placements on TD+/TD- and RD+/RD- lines shall be symmetrical for better impedance matching. *********************************************************************************************************************************************************************** OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303 Tel: 886-3-5979798 Fax: 886-3-5979737 E-mail: sales@optoway.com.tw http: // www.optoway.com.tw 12/1/2005 V2.0 Optoway PACKAGE DIAGRAM Units in mm TRSL-5140G 4 ********************************************************************************************************************************************************************** 1) Standard Case TRSL-5140G / TRSL-5140CG / TRSL-5140AG / TRSL-5140ACG 2) Extended Case TRSL-5140EG / TRSL-5140CEG / TRSL-5140AEG / TRSL-5140ACEG Note: Specifications subject to change without notice. *********************************************************************************************************************************************************************** OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303 Tel: 886-3-5979798 Fax: 886-3-5979737 E-mail: sales@optoway.com.tw http: // www.optoway.com.tw 12/1/2005 V2.0