TRSL-9115AG

Optoway FEATURES l l l l l l l l l l l l l l l l Duplex LC Single Mode Transceiver SONET OC-48 IR-1 / SDH STM-16 (S-16.1) Compliant Fiber Channel 2X/1X SM-LC-L FC-PI Compliant IEEE 802.3z Gigabit Ethernet Compliant Small Form Factor, RJ-45 size, 2X5 pin Package 1310 nm DFB LD Transmitter 13 dB Link Budget at Least AC/AC Coupled Signal Input / Output LVTTL Transmitter Disable Input LVTTL Signal Detection Output Single +3.3 V Power Supply RoHS Compliant 0 to 70oC Operating: TRSL-9115G -20 to 85oC Operating: TRSL-9115AG Wave Solderable and Aqueous Washable Class 1 Laser International Safety Standard IEC-60825 Compliant TRSL-9115G 1 *********************************************************************************************************************************************************************** TRSL-9115G / TRSL-9115AG 3.3V / 1310 nm / 2.5 Gbps RoHS Compliant SFF LC SINGLE-MODE TRANSCEIVER ********************************************************************************************************************************************************************* DESCRIPTION The TRSL-9115G series single mode transceivers is small form factor, low power, high performance module for bi-directional serial optical data communications such as SONET OC-48 IR-1 / SDH STM-16 (S-16.1), gigabit Ethernet and 1X/2X Fiber channel. This module is designed for single mode fiber and operates at a nominal wavelength of 1310 nm. The transmitter section uses a multiple quantum well 1310 nm DFB laser and is a class 1 laser compliant according to International Safety Standard IEC-60825. The receiver section uses an integrated InGaAs detector preamplifier (IDP) mounted in an optical header and a limiting post-amplifier IC. A PECL logic interface simplifies interface to external circuitry. LASER SAFETY This single mode transceiver is a Class 1 laser product. It complies with IEC-60825 and FDA 21 CFR 1040.10 and 1040.11. The transceiver must be operated within the specified temperature and voltage limits. The optical ports of the module shall be terminated with an optical connector or with a dust plug. APPLICATIONS l l l l ATM Switches and Routers SONET / SDH Switch Infrastructure XDSL Applications Metro Edge Switching ORDER INFORMATION P/No. TRSL-9115G TRSL-9115AG Bit Rate (Mb/s) 2488 2488 SONET /SDH IR-1/S-16.1 IR-1/S-16.1 Distance (km) 15 15 Wavelength Package (nm) 1310 DFB 2X5 LC 1310 DFB 2X5 LC Temp. TX Power RX Sens. RoHS (oC) (dBm) (dBm) Compliant 0 to 70 0 to -5 -18 Yes -20 to 85 0 to -5 -18 Yes Absolute Maximum Ratings Parameter Storage Temperature Operating Temperature Soldering Temperature Power Supply Voltage Input Voltage Output Current Symbol Tstg Topr --Vcc --Iout Min -40 0 -20 0 GND 0 Max 85 70 85 260 4.5 Vcc 30 Units o C o C o Notes TRSL-9115G TRSL-9115AG 10 seconds on leads only C V V mA Recommended Operating Conditions Parameter Power Supply Voltage Operating Temperature Data Rate Symbol Vcc Topr Min 3.13 0 -20 622 Typ 3.3 Max 3.47 70 85 2700 Units / Notes V o C / TRSL-9115G o C / TRSL-9115AG Mb/s 2488 *********************************************************************************************************************************************************************** OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303 Tel: 886-3-5979798 E-mail: sales@optoway.com.tw Fax: 886-3-5979737 http: // www.optoway.com.tw 1/1/2011 V3.0 Optoway Transmitter Specifications (0oC < Topr < 70oC, 3.13V < Vcc < 3.47V) Parameter Optical Optical Transmit Power Output Center Wavelength Output Spectrum Width Side Mode Suppression Ratio Extinction Ratio Output Eye Optical Rise Time Optical Fall Time Relative Intensity Noise Electrical Power Supply Current Data Input Current – Low Data Input Current – High Differential Input Voltage Data Input Voltage – Low Data Input Voltage -- High Disable Input Voltage -- Low Disable Input Voltage -- High Shut Off Time for TxDis Symbol Min Typ Max Units Po -5 --0 dBm 1270 1310 1360 nm λ ----1 nm ∆λ SMSR 30 dB ER 8.2 ----dB Compliant with Bellcore GR-253-CORE and ITU recommendation G.957 tr 150 ps tf 150 ps RIN -120 dB/Hz Icc IIL IIH VIH - VIL VIL - VCC VIH - VCC VTDIS,L VTDIS,H tDIS 180 -350 350 300 -2.0 -1.1 0 Vcc – 1.3 -1.58 -0.74 0.5 Vcc 1 mA µA µA mV V V V V ms TRSL-9115G Notes 1 -20 dB Width 2 *********************************************************************************************************************************************************************** 20% to 80% Values 20% to 80% Values 2 3 3 TX Output Enabled TX Ouput Disabled Notes: 1. Output power is power coupled into a 9/125 µm single mode fiber. 2. Maximum current is specified at Vcc = Maximum @ maximum temperature. 3. These inputs are compatible with 10K, 10KH and 100K ECL and PECL inputs. Receiver Specifications (0oC < Topr < 70oC, 3.13V < Vcc < 3.47V) Parameter Optical Sensitivity Maximum Input Power Signal Detect -- Asserted Signal Detect -- Deasserted Signal detect -- Hysteresis Wavelength of Operation Electrical Power Supply Current Data Output Voltage – Low Data Output Voltage – High Signal Detect Output Voltage -- Low Signal Detect Output Voltage -- High Symbol --Pin Pa Pd Min --0 ---35 1.0 1100 Typ ----------Max -18 ---18 --1600 100 -1.58 -0.74 0.8 Units dBm dBm dBm dBm dB nm mA V V V V Notes 1 Transition: low to high Transition: high to low Icc VOL - VCC VOH - VCC VSDL VSDH -2.0 -1.1 2.0 2 3 3 Notes: 1. Minimum sensitivity and saturation levels at BER=1E-10 for a 223-1 PRBS. 2. The current excludes the output load current. 3. These outputs are compatible with 10K, 10KH and 100K ECL and PECL outputs. *********************************************************************************************************************************************************************** OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303 Tel: 886-3-5979798 Fax: 886-3-5979737 E-mail: sales@optoway.com.tw http: // www.optoway.com.tw 1/1/2011 V3.0 Optoway CONNECTION DIAGRAM TRSL-9115G 3 *********************************************************************************************************************************************************************** PIN 1 2 3 4 5 6 7 8 9 10 MS Symbol VEEr VCC r SD RD− RD+ VCC t VEEt TDis TD+ TDMS Notes Directly connect this pin to the receiver ground plane +3.3V dc power for the receiver section Active high on this indicates a received optical signal. Receiver Dataout Bar. See recommended circuit schematic Receiver Dataout. See recommended circuit schematic +3.3V dc power for the transmitter section Directly connect this plan to the transmitter ground plane Transmitter Disable. Connect this pin to +3.3V TTL logic “1” to disable module To enable module connect to TTL logic low “0” Transmitter Data In. See recommended circuit schematic Transmitter Data In Bar. See recommended circuit schematic Mounting Studs. Connect to Chassis Ground RECOMMENDED CIRCUIT SCHEMATIC Vcc3.3V TDZ=50R LVPECL TD+ Z=5OR 10 9 8 7 6 TXDis(LVTTL) 1uH Vcc3.3V TDTD+ TDis Veet Vcct 10nF 10uF 1uH 10nF 10uF PHY DEVICE 1 2 3 4 5 Veer Vccr SD RDRD+ 10nF 10uF Vcc3.3V RD+ 100R Z=50R LVPECL RDZ=5OR SD TO LVTTL STAGE Note: 1. TX input is terminated inside the module. 2. Veer and Veet are not internally connected to each other. 3. 50 Ω line pattern and component placements on TD+/TD- and RD+/RD- lines shall be symmetrical for better impedance matching. *********************************************************************************************************************************************************************** OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303 Tel: 886-3-5979798 Fax: 886-3-5979737 E-mail: sales@optoway.com.tw http: // www.optoway.com.tw 1/1/2011 V3.0 Optoway PACKAGE DIAGRAM Units in mm TRSL-9115G 4 *********************************************************************************************************************************************************************** 1) Standard Case TRSL-9115G / TRSL-9115AG 2) Extended Case TRSL-9115EG / TRSL-9115AEG Note: Specifications subject to change without notice. *********************************************************************************************************************************************************************** OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303 Tel: 886-3-5979798 Fax: 886-3-5979737 E-mail: sales@optoway.com.tw http: // www.optoway.com.tw 1/1/2011 V3.0