TRSL-9340W-CXX0G

Optoway TRSL-9340W-CXX0G FEATURES l l l l l l l l l 18-wavelength CWDM Transceivers Duplex LC Single Mode Transceiver SONET OC-48 IR-2 / SDH STM-16 Compliant Compliant with Fiber Channel 2X/1X SM-LC-L FC-PI Compliant with IEEE 802.3z Gigabit Ethernet Multi-sourced 2X10 SFF Package Style CWDM DFB LD Transmitter 18 dB Link Power Budget At Least Analog Monitor Function -- Transmitter Laser Bias Current -- Transmitter Laser Optical Power Monitor -- Receiver Photo Detector Current AC/AC Coupled Signal Input / Output LVPECL Signal Input / Output LVTTL Signal Detection Output Single +3.3 V Power Supply RoHS Compliant 0 to 70oC Operation Wave Solderable and Aqueous Washable Class 1 Laser International Safety Standard IEC-60825 Compliant TRSL-9340W-CXX0G 1 ********************************************************************************************************************************************************************** 3.3V / CWDM / 2.5 Gbps RoHS Compliant SFF LC 2X10 SINGLE-MODE TRANSCEIVER ********************************************************************************************************************************************************************** DESCRIPTION The TRSL-9340W-CXX0G series single mode transceivers is small form factor, low power, high performance module for bi-directional serial optical data communications such as SONET OC-48 IR-2 / SDH STM-16 (S-16.2), IEEE 802.3z Gigabit Ethernet and 1X/2X Fiber channel. There are eighteen center wavelengths available from 1270 nm to 1610 nm, each step 20 nm. A guaranteed minimum optical link budget of 18 dB is offered. The transmitter section uses a multiple quantum well 1550 nm DFB laser and is a class 1 laser compliant according to International Safety Standard IEC-60825. The receiver section uses an integrated InGaAs detector preamplifier (IDP) mounted in an optical header and a limiting post-amplifier IC. A LVPECL logic interface simplifies interface to external circuitry. l l l l l l l l LASER SAFETY This single mode transceiver is a Class 1 laser product. It complies with IEC-60825 and FDA 21 CFR 1040.10 and 1040.11. The transceiver must be operated within the specified temperature and voltage limits. The optical ports of the module shall be terminated with an optical connector or with a dust plug APPLICATIONS l ATM Switches and Routers l SONET / SDH Switch Infrastructure l XDSL Applications ORDER INFORMATION P/No. Bit Rate (Mb/s) 2488 SONET/ SDH Power Budget (dB) ≥ 18 Wavelength (nm) CWDM* Package Temp. (oC) 0 to 70 TX Power RX Sens. RoHS (dBm) (dBm) Compliant 3 to -2 -20 Yes TRSL-9340W-CXX0G 2X10 LC CWDM Wavelength (0 to 70oC) Central Min. Typ. Max. Central Wavelength (nm) (nm) (nm) Wavelength -C270 1264.5 1270 1277.5 -C450 -C290 1284.5 1290 1297.5 -C470 -C310 1304.5 1310 1317.5 -C490 -C330 1324.5 1330 1337.5 -C510 -C350 1344.5 1350 1357.5 -C530 -C370 1364.5 1370 1377.5 -C550 -C390 1384.5 1390 1397.5 -C570 -C410 1404.5 1410 1417.5 -C590 -C430 1424.5 1430 1437.5 -C610 CWDM*: 18 Wavelengths from 1270 nm to 1610 nm, each step 20 nm. Min. (nm) 1444.5 1464.5 1484.5 1504.5 1524.5 1544.5 1564.5 1584.5 1604.5 Typ. (nm) 1450 1470 1490 1510 1530 1550 1570 1590 1610 Max. (nm) 1457.5 1477.5 1497.5 1517.5 1537.5 1557.5 1577.5 1597.5 1617.5 ********************************************************************************************************************************************************************** OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303 Tel: 886-3-5979798 E-mail: sales@optoway.com.tw Fax: 886-3-5979737 http: // www.optoway.com.tw 1/1/2011 V4.0 Optoway Absolute Maximum Ratings Parameter Storage Temperature Operating Temperature Soldering Temperature Power Supply Voltage Input Voltage Output Current Symbol Tstg Topr --Vcc --Iout Min -40 -10 -0.5 -0.5 0 Max 85 70 260 3.6 Vcc 50 Units o C o C o C V V mA TRSL-9340W-CXX0G Notes With air flow 1m/sec 10 seconds on leads only 2 *********************************************************************************************************************************************************************** Recommended Operating Conditions Parameter Power Supply Voltage Operating Temperature Data Rate Symbol Vcc Topr Min 3.13 0 622 Typ 3.3 2500 Max 3.47 70 Units / Notes V o C / air flow 1m/sec Mb/s Transmitter Specifications (0oC < Topr < 70oC, 3.13V < Vcc < 3. 47V) Parameter Symbol Min Typ Max Units Notes Optical Optical Transmit Power Po -2 --3 dBm 1 Output Center Wavelength λ-5.5 λ+7.5 nm 2 λ λ Output Spectrum Width ----1 nm -20 dB Width ∆λ Side Mode Suppression Ratio SMSR 30 dB Extinction Ratio ER 8.2 ----dB Output Eye Compliant with Bellcore GR-253-GORE and ITU-T Recommendation G.957 Optical Rise Time tr 150 ps 20% to 80% Values Optical Fall Time tf 150 ps 20% to 80% Values Relative Intensity Noise RIN -120 dB/Hz Electrical Power Supply Current Icc 180 mA 3 Data Input Current – Low IIL -350 µA Data Input Current – High IIH 350 µA Differential Input Voltage VIH - VIL 300 1600 mV Data Input Voltage – Low VIL - VCC -2.0 -1.58 V 4 Data Input Voltage -- High VIH - VCC -1.1 -0.74 V 4 TX Disable Input Voltage – Low TDIS 0 0.5 V TX Disable Input Voltage – High TDIS 2.0 Vcc V TX Disable Assert Time TASSERT 10 µs TX Disable Deassert Time TDEASSERT 50 µs Notes: 1. Output power is power coupled into a 9/125 µm single mode fiber. 2. ITU-T G.694.2 CWDM wavelength from 1270 nm to 1610 nm, each step 20 nm. 3. Maximum current is specified at Vcc = Maximum @ maximum temperature. 4. These inputs are compatible with 10K, 10KH and 100K ECL and PECL inputs. *********************************************************************************************************************************************************************** OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303 Tel: 886-3-5979798 E-mail: sales@optoway.com.tw Fax: 886-3-5979737 http: // www.optoway.com.tw 1/1/2011 V4.0 Optoway Receiver Specifications (0oC < Topr < 70oC, 3.13V < Vcc