CT2016DB19200C0FLHA1

Specifications Drawing No. USY1P-H1-14464-00 1 / 6 Issued Date. Dec,25,2014 Messrs: KED USA Note: Part Number will be revised in case of specification change. Product Type Crystal Units with Thermistor Series CT2016DB Frequency 19200kHz Customer Part Number - Customer Specification Number - KYOCERA Part Number CT2016DB19200C0FLHA1 Remarks Pb-Free, RoHS Compliant, MSL 1, GPS Quality Customer Approval Approval Signature Approved Date Department Person in charge Seller KYOCERA Crystal Device Corporation (Sales Division) 6 Takeda Tobadono-cho, Fushimi-ku, Kyoto 612-8501 Japan TEL. No. 075-604-3500 FAX. No. 075-604-3501 Manufacturer KYOCERA Crystal Device Corporation (Crystal Units Division) 5850, Higashine-Koh, Higashine-Shi, Yamagata 999-3701 Japan TEL. No. 0237-43-5611 FAX. No. 0237-43-5615 Design Department Quality Assurance Approved by Checked by Issued by KYOCERA Crystal Device Corporation Crystal Unit Application Engineering Section S.Itoh T.Soda A.Muraoka Y.Nozaki Crystal Units Division KYOCERA Crystal Device Corporation KBS-5079F Drawing No. USY1P-H1-14464-00 2/6 Revision History Rev.No. 1 Description of revision First Edition Date Approved by Checked by Issued by Dec,25,2014 T.Soda A.Muraoka Y.Nozaki KYOCERA Crystal Device Corporation KBS-5079F Drawing No. USY1P-H1-14464-00 3/6 1. APPLICATION This specification sheet is applied to Crystal Units with Thermistor “CT2016DB” for GPS Quality 2. KYOCERA PART NUMBER CT2016DB19200C0FLHA1 3. RATINGS Items SYMB. Rating Operating Temperature range Storage Temperature range Topr Tstg -30~+85 -40~+85 Unit C C Remarks 4. CHARACTERISTICS 4-1 ELECTRICAL CHARACTERISTICS Items SYMB. Mode of Vibration Nominal Frequency F0 Nominal Temperature TNOM Load Capacitance CL Frequency Tolerance dF Frequency dFT Temperature Characteristics Equivalent Series ESR Resistance Electrical Specification Min Typ. Max Fundamental 19.2 32 7.0 -10.0 +10.0 -12.0 +12.0 Drive Level Pd 0.01 Insulation Resistance IR 500 4-2 ELECTRICAL CHARACTERISTICS (Thermistor) Items Electrical Specification SYMB. Min Typ. Max Resistance 100k B-Constant 4250 Tolerance -1.0 +1.0 Test Condition Remarks Unit MHz C pF ppm 80  0.1 mW M *NOTE1 +25±3C -30~+85C 100V(DC) Remarks Unit  K % 25C 25C - 50C KYOCERA Crystal Device Corporation KBS-5079F Drawing No. 4/6 USY1P-H1-14464-00 5. APPEARANCES, DIMENSION OUTLINE DIMENSION (not to scale) (Top View) (TOP VIEW) 2.00±0.10 #4 #3 #4 SENSOR #3 HOT #1 HOT #2 GND 1 1.60±0.10 19200 5 K202Z #2 #1 3 4 1.00(MAX) 2 6 (Side View) PIN No. (Bottom View) #1 HOT 4-0.67±0.1 #2 GND #2 #3 HOT #4 SENSOR 4-0.59±0.1 #1 PIN Layout #4 #3 UNIT : mm MARKING (1) Nominal Frequency (2) Identification (3) Date Code (4) Manufacturing Location (5) Option Code (6) 1Pin mark First 5digits of the frequency are indicated. [K] mark is KYOCERA Crystal Device Corporation. LAST 1 DIGIT of YEAR and WEEK (Ex) 2014,Jan,01401 Y  Japan(Yamagata) Z  Japan(Shiga Yohkaichi) Alphabet & Number 2digits or blank.(For T-Sensor) KYOCERA Crystal Device Corporation KBS-5079F Drawing No. USY1P-H1-14464-00 5/6 6. RECOMMENDED LAND PATTERN (not to scale) 0.70 0.75 0.75 0.75 0.30 0.75 0.43 4-R0.20 UNIT : mm 0.46 7 .TAPING&REEL 4.00.1 1.5 0.1 0 Feeding direction 2.00.05 1.750.1 1.0+0.1/0 2.30.1 3.50.05 8.00.2 7-1.Dimensions 4.00.1 Reel specifications 1.100.05 0.250.05 1.90.1 W R S U Q P 330 Reel (3000pcs MAX) Symbol Dimension Symbol Dimension P Q R 3302.0 1001.0 130.2 S U W 210.8 2.00.5 9.40.5 (Unit : mm) KYOCERA Crystal Device Corporation KBS-5079F Drawing No. USY1P-H1-14464-00 6/6 8. Cautions for use (1) Soldering upon mounting There is a possibility to influence product characteristics when Solder paste or conductive glue comes in contact with product lid or surface. (2) When using mounting machine Please minimize the shock when using Mounting Machine to avoid any excess stress to the product. (3) Conformity of a circuit We strongly recommend to make sure that Negative resistance (Gain) of IC is designed to be 3 times the ESR (Equivalent Series Resistance) of Crystal unit. 9. Storage conditions Please store product in below conditions, and use within 6months. Temperature +18 to +30°C, and the humidity of 20 to 70 % in the packaging condition. KYOCERA Crystal Device Corporation KBS-5079F