KC7050P156.250L20E00

Specification Drawing No. TKY1T-H1-20465-00[41] Issued Date. August 5, 2020 TO: Digi-key Note：In case of specification change, KYOCERA Part Number also will be changed. Product Name Crystal Oscillator Product Model Frequency xxx.xxx MHz (Refer to TKY1T-H1-20465-00[41]-9/9(Appendix 1 / Output Frequency) Customer Part Number Customer Specification Number KYOCERA Part Number Remarks KC7050Pxxx.xxxL20E00 (Refer to TKY1T-H1-20465-00[41]-9/9(Appendix 1 / KYOCERA Part Number) RoHS Compliant / MSL 1 Customer Acceptance Accept Signature Accept Date Department Person in charge Seller KYOCERA Corporation Corporate Electronic Components Group Electronic Components Sales Division 6 Takeda Tobadono-cho, Fushimi-ku, Kyoto 612-8501 Japan TEL. No. 075-604-3500 FAX. No. 075-604-3501 KYOCERA Corporation Corporate Electronic Components Group Crystal Components Division Yamagata higashine Plant 5850, Higashine-koh, Higashine-shi, Yamagata 999-3701 Japan TEL. No. 0237-43-5611 FAX. No. 0237-43-5615 Design Department Quality Assurance Approved by Examined by Design Engineering Section1 Crystal Components Division 角 Y.Kakuta 中 N.Nakano K.Jikuhara 竺 田 KYOCERA Corporation KBS-5079J(1/9) 野 原 Written by 加 Y.Kato 藤 Drawing No. TKY1T-H1-20465-00[41] Revision History Rev.No. 00 Description of revise First Edition Date Approved by Examined by Written by Aug. 5, 20 N.Nakano K.Jikuhara Y.Kato KYOCERA Corporation KBS-5079J(2/9) Drawing No. TKY1T-H1-20465-00[41] 1. Scope This specification shall be defined of the Clock Oscillator for the integrated circuits (ICs). 2. Customer Part Number ----3. KYOCERA Part Number KC7050Pxxx.xxxL20E00 (Refer to TKY1T-H1-20465-00[41]-9/9(Appendix 1 / KYOCERA Part Number) 4. Electrical Characteristics 4-1. Absolute Maximum Rating Item Symbol Rated Value Units VCC VIN TSTG -0.5 to +5.0 -0.5 to VCC +0.5 -55 to +125 V V °C Power Supply Voltage Input Voltage Storage Temperature Note: If the part is used beyond absolute maximum ratings, it may cause internal destruction. The part should be used under the recommended operating conditions the reliability of this part may be damaged if those conditions are exceeded. 4-2. Recommended Operating Conditions Item Symbol Min Typ Max Units VCC VIN TOPR 2.375 0 -0 2.5 --+25 2.625 VCC +70 V V °C Power Supply Voltage Input Voltage Operating Temperature 4-3. Electrical Characteristics Symbol Item Min Remarks Typ Max Units Output Frequency fO --- ※1 --- MHz Frequency Tolerance f_tol -50 --- +50 ppm Current Consumption Standby Current Symmetry (Duty Ratio) Rise Time ICC IST SYM ----45 ----50 70 30 55 mA µA % 100ohm, @ crossing point Tr --- --- 0.6 ns 100ohm Tf --- --- 0.6 VOL VOH 0.9 --- 1.1 1.43 --1.6 VOD 247 330 454 dVOD --- --- 50 VOS dVOS 1.125 --- 1.25 --100 ------------------ 1.375 50 (20% to 80% Output Swing) Fall Time (80% to 20% Output Swing) Output voltage -“L” Output voltage -“H” Differential Output Voltage Differential Output Voltage Error Offset Voltage Offset Voltage Error Output Load Input Voltage -“L” Input Voltage -“H” Output Disable Time Output Enable Time Start up time Deterministic Jitter* 1sigma Jitter* Peak to Peak Jitter* Remarks Include initial tolerance, operating temperature range, rated power supply voltage change, load change, aging (1year @+25°C), shock and vibration V mV --VIL VIH t_dis t_ena t_sta DJ JSigma JPK-PK --70% VCC ------------- 30% VCC --200 10 10 2 4 30 dVOD =| VOD1 - VOD2| V mV ohm dVOS =| VOS1 - VOS2| LVDS Output V ns ms ms ps @Minimum operating voltage to be 0sec DJ pk-pk Note: All electrical characteristics have defined on the maximum loaded and recommended operating conditions. * Based on Time Interval Analyzer "Wavecrest SIA-3000”. Table 1 ※1 Refer to TKY1T-H1-20465-00[41]-9/9(Appendix 1 / Output Frequency) KYOCERA Corporation KBS-5079J(3/9) Drawing No. TKY1T-H1- 20465-00[41] 4-4. Measurement Condition The reference temperature shall be +25±2ºC. The measurement shall be performed at the temperature range of +5 ºC to +35 ºC unless otherwise the result is doubtful. 4-5. Measurement Circuit The electrical characteristics shall be measured by test circuit "Fig. 1". Also jitter shall be measured by test circuit "Fig. 4". 4-6. Clock Timing Chart The clock timing charts are "Fig. 2" and "Fig. 3". RL A 6 +3.3V 5 4 VOD, dVOD Duty, Vopp, Tr/Tf RL Oscillator 10µF 0.01µF 1 V 2 3 VOH VOS, dVOS VOL E/D Control Fig.1 Test Circuit Tr Tf VOH Output 80%Vopp 50%Vopp Vopp 20%Vopp VOL Output Output Fig.2 Clock Timing Chart 1 Clock Oscillator Test Fixture 50 ohm COAX with SMA Connectors RL 6 +3.3V 5 4 Fig.3 Clock Timing Chart 2 RL WaveCrest SIA-3000   Oscillator 10µF 0.01µF 1 2 3 50 ohm SMA Termination  E/D Control Fig.4 Jitter Test Circuit KYOCERA Corporation KBS-5079J(4/9) Time Interval Analyzer  WaveCrest SIA-3000 DTS timer calibration  Over 30 minutes warm-up  Extend 30 minutes calibration Jitter histogram conditions (Tail-fit)  More than 50,000cyc Hits  Bit Error Ratio (BER) –12 (14sigma) Drawing No. TKY1T-H1- 20465-00[41] 5. Dimensions and Marking 7.0 0.6 4 5 6 3 2 1 Manufacturing Date Code KC CCG Output Frequency The output frequency is seven-digit including a decimal point. The frequency greater than the number of digits have rounded off. (E.g. 133.3333MHz "133.333”) 2.46 5.0 1.17 1.4 Model and Output Frequency MxxxPxxx Pad1 Indication Model See Table 2 2.54 Manufacturing Date Code 0.75 1.6 2.54 Plating Ni+Au Tolerance: +/-0.2 Unit:(mm) Pad arrangement Enable/Disable NC Case GND Output Complementary Output VCC 1 2 3 4 5 6 Enable/Disable Function Pad1 Pad4/Pad5 OPEN Active “H” Level Active “L” Level No-Oscillation Year Code Year Code Month Code Day Code Day Code Day Code 2001 A 2011 L 1 1 1 1 11 B 21 M 2002 B 2012 M 2 2 2 2 12 C 22 C 2013 N 3 3 3 3 13 D 23 P D 2014 P 4 4 4 4 14 E 24 Q 2005 E 2015 Q 5 5 5 5 15 F 25 R 2006 F 2016 R 16 G 2007 G 2017 S 7 7 7 7 17 H 27 T 2008 H 2018 T 8 6 8 6 8 6 8 6 18 J 28 V 2009 J 2019 V 9 9 9 9 19 K 29 W 2010 K 2020 W 10 A 10 A 20 L 30 X It repeats from A in 2021 and afterwards. 11 B 31 Y 12 C Without I, O, U, Z ±50 *Refer to TKY1T-H1-20465-00[41]-9/9 (Appendix 1 / Marking ) KC7050P xxx.xxx L 2 0 E 00 A. B. C. D. E. Series (6pad SMD Crystal Oscillator) Output Frequency Output L: LVDS Supply Voltage 2: 2.5V Frequency Tolerance* 0: ±50ppm C D E F G F. Symmetry (Duty Ratio) and Enable/Disable Function E: Symmetry: 45% to 55% with Stand-by Function G. Suffix for Individual Requirements (STD Specification is “00”) Packing (Tape & Reel 1,000pcs/Reel) *Over All Conditions: Include initial tolerance, operating temperature range, rated power supply voltage change, load change, aging (1year @+25°C), shock and vibration KYOCERA Corporation KBS-5079J(5/9) S MxxxNxxx 0 Table 2 B 26 e.g. :”C46” means “Apr-6-2003” Stability Model Code Code (ppm) KC7050Pxxx.xxxL20E00 6. Parts Numbering Guide A N 2003 2004 Drawing No. TKY1T-H1- 20465-00[41] 7. Environmental Characteristics Items Conditions Criteria of Acceptance Soaking: Dipped potion: +245±5°C, 5.0±0.5sec Minimum 95% coverage Reflow soldering: Peak +260°C max, 10sec, Twice max 7-2. Soldering Heat Without looseness or crack etc. Soldering iron: Resistance +380±5°C, 3+1/-0sec, Twice as one time for six pads 10 cycles: 7-3. Temperature Cycle -55°C to +125°C (30minuts each/ cycle) 5 times 7-4. Mechanical 14,750m/sec2 (1,500G), Duration of pulse 0.5msec Shock (Pulse) (MIL-STD-883D-2002.3 Condition B) 4 times each axis X, Y, Z: 20 to 2,000Hz and 2,000Hz to 20Hz/cycle Clause 7-10 shall be satisfied. 7-5. Vibration Peak acceleration 196m/sec2 (20G) (MIL-STD-883D-2007.2 Condition A) 1000 hours: 7-6. High Temperature Temperature: +85+5/-3°C 1000 hours: 7-7. Low Temperature Temperature: -40+5/-3°C 10 cycles: 7-8. Humidity Cycle Based on 1004 specifications Clause 7-1 shall be satisfied. (MIL-STD-883D-1004.7) 7-9. Hermeticity 1 Soaking: No bubbles appeared (Gross leak) +125°C, 5minutes 7-10. Hermeticity 2 Measured by Helium Detector Equipment 5x10-9 Pa m3/sec max (Fine leak) (MIL-STD-883D-1014.10 Condition A1) After each testing, the parts shall be subjected to standard atmospheric conditions more than 2 hours. After that, the electrical characteristics shall be measured. The result of the test shall be satisfied Table 1. 7-1. Solderability Table 3 8. Recommended Land pattern and Soldering Guide Unit: (mm) Note: Since the part doesn’t have Bypass Capacitor between Vcc and GND, Please mount high frequency type capacitor 0.01μF and 10μF to the nearest position of oscillator. Fig.4 Land pattern • Available Reflow times: Maximum twice Fig.5 Reflow profile (Lead Free Available) 8-1.Soldering Iron Conditions  Tip temperature of soldering iron: +380°C±5°C, Soldering time: 3sec+1/-0sec  Numbers of soldering iron: Maximum twice as one time for 6 pads KYOCERA Corporation KBS-5079J(6/9) Drawing No. TKY1T-H1- 20465-00[41] 9. Taping Specifications P0 D0 T P2 E K W1 E A F W B0 KC CCG R106.250 A0 N D C D1 P1 W2 Unit: (mm) Symbol Dimensions Symbol Dimensions Symbol Dimensions A0 B0 W F E 5.4±0.1 7.4±0.1 16.0±0.2 7.5±0.1 1.75±0.1 D0 T P1 P2 P0 8.0±0.1 2.0±0.1 4.0±0.1 K D1 2.0±0.1 1.55±0.1 Unit: (mm) A N W1 180 +0/-3 60+1/–0 17.0±0.2 Symbol Dimensions Symbol 1.5+0.1/-0 0.3±0.05 Dimensions W2 C D 19.5±1.0 13.0±0.2 21.0±0.8 E Symbol Dimensions 2.0±0.5 Fig.6 Emboss Carrier Tape Fig.7 Reel 9-1. Taping Quantities • The taping of per reel shall be packed 1,000 pcs. • The parts shall be contained continuously in the pocket. 9-2. Leader and Blank Pockets • The package shall be consisted of leader, blank pockets and loaded pocket as follows “Fig. 8”. • The power of peeling strength between top tape and carrier tape shall be 0.1N(10gf) to 0.7N(70gf) as follows “Fig. 9”. Top Tape A) B) C) D) Leader Blank Pocket (40mm to 320mm) A+B: 400mm to 560mm Load Pocket Blank Pocket (160mm minimum) Carrier Tape 165º to 180º Pulling Direction Fig.8 Packing Method Fig.9 Peeling Strength 9-3. Reel Label The reel label shall be consisted as below. (Based on EIAJ C-3 format) A) B) C) Customer Part Number Lot No. Quantities D) E) Shipping Date Vender Name 9-4. Exterior Package Label The oscillator shall be packed properly to avoid defect in transportation. The exterior package label shall be consisted as below. A) B) C) D) Name of Customer P/O No. Customer Part Number Lot No. E) F) G) Quantities Shipping Date Vender Name KYOCERA Corporation KBS-5079J(7/9) Drawing No. TKY1T-H1- 20465-00[41] 10. The agreement of this specifications In case there is any obscure point or doubt concerning the contents of the specification, it shall be settled through consultation of both parties. 11. Remarks on Usages A) Storage Conditions The parts shall be stored in temperature range of -5 to +40°C, humidity 40 to 60% RH, and avoid direct sunlight. Then the parts shall be used within 6 months. B) Handling Conditions Although the part has protection circuit against static electricity, when excess static electricity is applied, the inside IC may get damaged. Before mounting on the PCB, please make sure the direction of the part is correct. Otherwise the part of temperature will increase. And also the part will have some damages. Please do not use the parts under the unfavorable condition such as beyond specified range in this specification. Please do not use the parts under the condition, in the water or in the salt water also environment of dew or harmful gas. C) Soldering Conditions This product can respond to the general Pb-free reflow profile. The wave soldering can not be supported. D) Soldering in Mounting In case of Solder paste and conductive glue contact product lid or product side face exception for product terminal it’s possible to influence product characteristics. Please be careful above contents. E) Washing Conditions Ultra sonic cleaning is available. However there is a possibility that Crystal in the part may cause damaged under certain condition. Therefore please test before using. After washing, please dry the parts completely. Otherwise water drops between the parts and PCB may cause migration. In case of using this part without above precaution, Kyocera is unable to guarantee the specific characteristics. 12. Quality guarantee In case when Kyocera Corporation rooted failure occurred within 1year after its delivery, substitute product will be arranged based on discussion. Quality guarantee of product after 1year of its delivery is waivered. Appendix 1 KYOCERA Corporation KBS-5079J(8/9) Drawing No. TKY1T-H1- 20465-00[41] No Customer Part Number Output Frequency (MHz) KYOCERA Part Number 1 ----- 125.000 KC7050P125.000L20E00 M125P000 2 ----- 150.000 KC7050P150.000L20E00 M150P000 3 ----- 156.250 KC7050P156.250L20E00 M156P250 KYOCERA Corporation KBS-5079J(9/9) Marking (Model and Output Frequency)