TCG035QVLPDANN-AN50

 Spec No. Date SPEC TQ3C-8EAF0-E1YAD29-00 June 2, 2014 TYPE : TCG035QVLPDANN-AN50 < 3.5 inch QVGA transmissive color TFT with LED backlight> CONTENTS 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. Application Construction and outline Mechanical specifications Absolute maximum ratings Electrical characteristics Optical characteristics Interface signals Input timing characteristics Backlight characteristics Lot number identification Warranty Precautions for use Reliability test data Outline drawing KYOCERA DISPLAY CORPORATION This specification is subject to change without notice. Consult Kyocera before ordering. Original Issue Date June 2, 2014 Designed by: Engineering dept. Prepared Checked Confirmed by: QA dept. Approved Checked Approved Spec No. TQ3C-8EAF0-E1YAD29-00 Part No. Page TCG035QVLPDANN-AN50 Warning 1. This Kyocera LCD module has been specifically designed for use only in electronic devices and industrial machines in the area of audio control, office automation, industrial control, home appliances, etc. The module should not be used in applications where the highest level of safety and reliability are required and module failure or malfunction of such module results in physical harm or loss of life, as well as enormous damage or loss. Such fields of applications include, without limitation, medical, aerospace, communications infrastructure, atomic energy control. Kyocera expressly disclaims any and all liability resulting in any way to the use of the module in such applications. 2. Customer agrees to indemnify, defend and hold Kyocera harmless from and against any and all actions, claims, damages, liabilities, awards, costs, and expenses, including legal expenses, resulting from or arising out of Customer's use, or sale for use, or Kyocera modules in applications. Caution 1. Kyocera shall have the right, which Customer hereby acknowledges, to immediately scrap or destroy tooling for Kyocera modules for which no Purchase Orders have been received from the Customer in a two-year period. - Spec No. Part No. TQ3C-8EAF0-E1YAD29-00 Revision record Designed by : Engineering dept. Date Rev.No. Prepared Date Page Checked Approved Page TCG035QVLPDANN-AN50 Confirmed by : QA dept. Checked Descriptions Approved - Spec No. Part No. TQ3C-8EAF0-E1YAD29-00 Page TCG035QVLPDANN-AN50 1 1. Application This document defines the specification of TCG035QVLPDANN-AN50. (RoHS Compliant) 2. Construction and outline : Transmissive color dot matrix type TFT : LED : Anti-Glare treatment : Timing controller, Power supply (3.3V input) (without constant current circuit for LED Backlight) LCD Backlight system Polarizer Additional circuit 3. Mechanical specifications Item Specification Unit 76.9(W)×63.9(H)×4.9(D) mm Active area 70.56(W)×52.92(H) (8.8cm/3.5 inch(Diagonal)) mm Dot format 320×(R,G,B)(W)×240(H) dot 0.0735(W)×0.2205(H) mm Normally White - 45 g Outline dimensions 1) Dot pitch Base color Mass 2) 1) Projection not included. Please refer to outline for details. 2) Due to the characteristics of the LCD material, the color varies with environmental temperature. M303011                                Spec No. Part No. TQ3C-8EAF0-E1YAD29-00 Page TCG035QVLPDANN-AN50 2 4. Absolute maximum ratings 4-1. Electrical absolute maximum ratings Item Symbol Min. Max. Unit VDD -0.3 4.0 V Supply voltage Input signal voltage 1) VIN -0.3 4.0 V LED forward current 2) 3) IF - 30 mA 1) Input signal : CK, R0㹼R7, G0㹼G7, B0㹼B7, HSYNC, VSYNC, ENAB, REST, CSB, SCK, SDI 2) For each “AN-CA” 3) Do not apply reversed voltage. 4-2. Environmental absolute maximum ratings Item Symbol Min. Max. Unit Operating temperature 1) TOP -20 70 °C Storage temperature 2) TSTO -30 80 °C Operating humidity 3) HOP 10 4) %RH Storage humidity 3) HSTO 10 4) %RH Vibration - 5) 5) - Shock - 6) 6) - 1) Operating temperature means a temperature which operation shall be guaranteed. Since display performance is evaluated at 25°C, another temperature range should be confirmed. 2) Temp. = -30°C㸺48h , Temp. = 80°C㸺168h    Store LCD at normal temperature/humidity. Keep them free from vibration and shock. An LCD that is kept at a low or a high temperature for a long time can be defective due to other conditions, even if the low or high temperature satisfies the standard.  (Please refer to “Precautions for Use” for details.) 3) Non-condensing 4) Temp.ӌ40°C, 85%RH Max.   Temp.㸼40°C, Absolute humidity shall be less than 85%RH at 40°C.  5)  Frequency 10㹼55 Hz Vibration width 0.15mm Interval Acceleration value (0.3㹼9 m/s2) 10-55-10 Hz  㸯minutes        2 hours in each direction X, Y, Z (6 hours total)        EIAJ ED-2531 6) Acceleration: 490 m/s2, Pulse width: 11 ms 3 times in each direction: ±X, ±Y, ±Z    EIAJ ED-2531 M303011                                Spec No. Part No. TQ3C-8EAF0-E1YAD29-00 Page TCG035QVLPDANN-AN50 3 5. Electrical characteristics              Item Temp. = -20㹼70°C     Symbol Condition Min. Typ. Max. Unit VDD - 3.0 3.3 3.6 V Current consumption IDD 2) - 8.0 11.3 mA Permissive input ripple voltage VRP VDD=3.3V - - 100 mVp-p VIL "Low" level 0 - 0.2VDD V VIH "High" level 0.8VDD - VDD V Supply voltage 1) Input signal voltage 3) 1) VDD-turn-on conditions 㼂㻰㻰 㻹㼕㼚㻚㻌㻝㻜䃛㼟 㻹㼕㼚㻚㻌㻜 㻾㻱㻿㼀 㻹㼕㼚㻚㻌㻝㻜䃛㼟 㻹㼕㼚㻚㻌㻜 㻿㼕㼓㼚㼍㼘㻌㻌㻟㻕 㻹㼕㼚㻚㻌㻞㻜㻜㼙㼟 㻹㼕㼚㻚㻌㻞㻜㻜㼙㼟 㻸㻱㻰㻌㻻㻺 2) IDD measuring conditions Typ. : VDD=3.3V, Temp. = 25°C Max. : VDD=3.6V, Temp. = 70°C Display pattern 123456789  1 2 3 : : : 239 240 (dot) ࣭࣭࣭࣭࣭࣭࣭࣭࣭࣭࣭࣭࣭࣭࣭958 959 960(dot)           SubPixelChecker 3) Input signal : CK, R0㹼R7, G0㹼G7, B0㹼B7, HSYNC, VSYNC, ENAB, REST, CSB, SCK, SDI M303011                                Spec No. Part No. TQ3C-8EAF0-E1YAD29-00 Page TCG035QVLPDANN-AN50 4 6. Optical characteristics            Item Response time Measuring spot =ȭ6.0mm, Temp. = 25°C         Symbol Condition Min. Typ. Max. Unit Rise Ǖr ȟ=ȭ=0° - 8 - ms Down Ǖd ȟ=ȭ=0° - 22 - ms ȟUPPER - 80 - ȟLOWER - 60 - ȭLEFT - 80 - 䃥RIGHT - 80 - Viewing angle range View direction : 12 o’clock (Gray inversion) CRӍ10 Contrast ratio Brightness deg. CR ȟ=ȭ=0° 700 1,000 - - L IF=15mA/Line 700 1,000 - cd/m2 0.550 0.600 0.650 0.300 0.350 0.400 0.295 0.345 0.395 y 0.530 0.580 0.630 x 0.110 0.160 0.210 0.065 0.115 0.165 0.255 0.305 0.355 0.280 0.330 0.380 x Red deg. ȟ=ȭ=0° y x Green ȟ=ȭ=0° Chromaticity coordinates Blue ȟ=ȭ=0° y x White ȟ=ȭ=0° y 6-1. Definition of contrast ratio CR(Contrast ratio) 㸻 Brightness with all pixels "White" Brightness with all pixels "Black" 6-2. Definition of response time :KLWH %ODFN     %ULJKWQHVV :KLWH ȫU ȫG M303011                                - Spec No. Part No. TQ3C-8EAF0-E1YAD29-00 Page TCG035QVLPDANN-AN50 6-3. Definition of viewing angle ȭ r ȟ833(5 \ ȟ r \ ȟ/2:(5 ȭ/()7 [ [ ȭ5,*+7 [ [ \ \ ȭGLUHFWLRQ ȟGLUHFWLRQ 6-4. Brightness measuring points 80×3 60 1 240×3 (dot) 4 3 120 180 160×3 2 5 (dot) 1) Rating is defined as the white brightness at center of display screen(3). 2) 5 minutes after LED is turned on. (Ambient Temp.=25Υ) M303011                                5 Spec No. Part No. TQ3C-8EAF0-E1YAD29-00 Page TCG035QVLPDANN-AN50 6 7. Interface signals No. Symbol Description 1 2 GND GND 3 4 5 VDD VDD R0 6 R1 RED data signal 7 8 R2 R3 RED data signal RED data signal 9 10 11 R4 R5 R6 12 13 R7 G0 RED data signal RED data signal RED data signal RED data signal(MSB) 14 15 G1 G2 GREEN data signal GREEN data signal 16 G3 17 18 19 G4 G5 G6 GREEN data signal GREEN data signal GREEN data signal 20 21 G7 B0 22 23 B1 B2 BLUE data signal BLUE data signal 24 25 B3 B4 26 27 B5 B6 BLUE data signal BLUE data signal BLUE data signal 28 29 B7 GND 30 31 CK CSB 32 33 HSYNC VSYNC 34 35 ENAB GND 36 37 REST SCK Reset signal Clock (SPI) 38 39 SDI GND 40 41 NC NC Data signal(SPI) GND NC(Open) 42 43 44 NC NC GND 45 46 CA1 NC Cathode1 NC 47 AN1 48 49 AN2 NC Anode1 Anode2 50 CA2 GND GND 3.3V power supply 3.3V power supply RED data signal(LSB) GREEN data signal(LSB) GREEN data signal GREEN data signal(MSB) BLUE data signal(LSB) BLUE data signal BLUE data signal(MSB) GND Sampling clock Select signal(SPI) Horizontal synchronous signal(negative) Vertical synchronous signal(negative) Data Enable (Low signal only) GND NC(Open) NC(Open) NC GND NC Cathode2 M303011                                Note Spec No. Part No. TQ3C-8EAF0-E1YAD29-00 Page TCG035QVLPDANN-AN50 7 8. Input timing characteristics 8-1. LCD (Necessity of V㺃HSYNC) Item Symbol Min. Typ. Max. Unit 1/Tc - 6.5 - MHz Tc - 154 - ns High time Tch 50 - - ns Low time Tcl 50 - - ns Set up time Tds 12 - - ns Hold time Tdh 12 - - ns Set up time Ths 20 - - ns Hold time Thh 20 - - ns Frequency 1/Th - 14.9 - kHz Period Th - 408 - Tc Front porch Thf - 20 - Tc Back porch Thb - 68 - Tc Frequency Clock (CK) Data (R0㹼R5,G0㹼G5, B0㹼B5) Horizontal sync. Signal (HSYNC) Period Horizontal display period Vertical sync. Signal (VSYNC) Thd 320 Tc Set up time Tvs 20 - - ns Hold time Tvh 20 - - ns Period Tv - 262 - Th Front porch Tvf - 4 - Th Back porch Tvb - 18 - Th Vertical display period Tvd Synchronous signal phase lag Thv 㸮 - 240 Tc Refresh rate 1/Tv - 60 - Hz Tres 10 - - ȣs Reset signal (REST) Pulse width 240 Th 1) In case of lower frequency, the deterioration of the display quality, flicker etc., may occur. M303011                                Note Spec No. TQ3C-8EAF0-E1YAD29-00 Part No. TCG035QVLPDANN-AN50 M303011                                Page 8 Spec No. Part No. TQ3C-8EAF0-E1YAD29-00 Page TCG035QVLPDANN-AN50 9 8-2. SPI Item Clock (SCK) Select signal (CSB) Data signal (SDI) Symbol Min. Typ. Max. Unit Period Tsc 50 - - ns High time Tsch 25 - - ns Low time Tscl 25 - - ns Set up time Tcss 50 - - ns Hold time Tcsh 50 - - ns High time Tcs 50 - - ns Set up time Tds 15 - - ns Hold time Tdh 15 - - ns Note 㻲㼕㼞㼟㼠㻌㼀㼞㼍㼚㼟㼙㼕㼟㼟㼕㼛㼚㻌㻔㻾㼑㼓㼕㼟㼠㼑㼞㻕㻌㻱㼤㻚㻾㻜㻝㼔 6HOHFWVLJQDO &6% 7FVK 7FVV                                &ORFN 6&. 7VFK 7VFO 7VF 'DWDVLJQDO 6',       56 5:          7FV 㻿㼑㼏㼛㼚㼐㻌㼀㼞㼍㼚㼟㼙㼕㼟㼟㼕㼛㼚㻌㻔㻰㼍㼠㼍㻕㻌㻱㼤㻚㻣㻟㻜㻜 6HOHFWVLJQDO &6%                               &ORFN 6&. 7GK 'DWDVLJQDO 6',       56 5:      7GV      㼀㼞㼍㼚㼟㼙㼕㼟㼟㼕㼛㼚㻌㻲㼛㼞㼙㼍㼠 7UDQVIHUHQGV 7UDQVIHUVWDUWV 6HOHFWVLJQDO &6%                       '% '% '% '% '% '% '% '% '% '% '% '% '%   &ORFN 6&. 06% 'DWDVLJQDO 6',     'HYLFH,'   56 5: '% /6% ,QGH[UHJLVWHUVHWWLQJ,QVWUXFWLRQ M303011                                '% '% Spec No. Part No. TQ3C-8EAF0-E1YAD29-00 TCG035QVLPDANN-AN50 8-3. Register Reg# Hex Code Description Note R01h R02h 7300 0200 6464 Basic format Display driving 1) R03h R04h R05h 04C7 F444 R06h R08h R0Ah R0Bh R0Dh R0Eh Basic format E860 06FF Display driving 4008 D400 Display quality Panel driving 422C 2D00 0000 R0Fh R16h Power supply Power supply Power supply 9F80 Display driving R17h R1Eh 2212 006D Power supply R30h 0001 0105 0000 R31h R32h R33h 0102 0707 R34h R35h 0206 R36h R37h 0607 0201 R3Ah R3Bh 1400 1400 Display quality 1) Reverse scan control R01h:7300h R01h:3300h R01h:7100h R01h:3100h 8-4. Input Data Signals and Display position on the screen 䠠䠍䠈䠠䠤䠍 䠠䠍䠈䠠䠤䠎 䠠䠎䠈䠠䠤䠍 䠠䠎䠈䠠䠤䠎 䠠䠏䠈䠠䠤䠍 䠠䠏䠈䠠䠤䠎 䠠䠏䠎䠌䠈䠠䠤䠍 㻾 㻳 㻮 䠠䠍䠈䠠䠤䠎䠐䠌 䠠䠎䠈䠠䠤䠎䠐䠌 䠠䠏䠈䠠䠤䠎䠐䠌  M303011                                Page 10 Spec No. Part No. TQ3C-8EAF0-E1YAD29-00 Page TCG035QVLPDANN-AN50 11 9. Backlight characteristics Item Forward current Forward voltage Operating life time 1) 2) 㻌㻌 3) 4) 1) 1) 2), 3) Symbol Min. Typ. Max. Unit Note IF - 15 - mA Ta=-20㹼70°C - 24.72 26.32 V IF=15mA, Ta=-20Υ - 23.68 25.28 V IF=15mA, Ta=25Υ - 23.04 24.64 V IF=15mA, Ta=70Υ - 50,000 - h IF=15mA, Ta=25Υ VF T For each “AN-CA” When brightness decrease 50% of minimum brightness. 㻌 The average life of a LED will decrease when the LCD is operating at higher temperatures. Life time is estimated data.(Condition : IF=15mA, Ta=25Υ in chamber). An input current below 5mA may reduce the brightness uniformity of the LED backlight. This is because the amount of light from each LED chip is different. Therefore, please evaluate carefully before finalizing the input current. M303011                                Spec No. Part No. TQ3C-8EAF0-E1YAD29-00 Page TCG035QVLPDANN-AN50 12 10. Lot number identification  The lot number shall be indicated on the back of the backlight case of each LCD. TCG035QVLPDANN-AN50                 - ŌŌ - ŌŌ - Ō ŅŅ 12   Ņ 3 MADE IN Ņ 4 ŌŌŌŌŌ Ņ 5 No1. - No5. above indicate 1. Year code 2. Month code 3. Date 4. Version Number 5. Country of origin (Japan or China)   Year 2014 2015 2016 2017 2018 2019 Code 㸲 㸳 㸴 㸵 㸶 㸷 Month Jan. Feb. Mar. Apr. May Jun. Code 1 2 3 4 5 6 Month Jul. Aug. Sep. Oct. Nov. Dec. Code 7 8 9 X Y Z 11. Warranty  11-1. Incoming inspection   Please inspect the LCD within one month after your receipt.   11-2. Production warranty   Kyocera warrants its LCD’s for a period of 12 months from the ship date. Kyocera shall, by mutual agreement, replace or re-work defective LCD’s that are shown to be Kyocera’s responsibility. M303011                                Spec No. TQ3C-8EAF0-E1YAD29-00 Part No. Page TCG035QVLPDANN-AN50 13 12. Precautions for use 12-1. Installation of the LCD 1) A transparent protection plate shall be added to protect the LCD and its polarizer. 2) The LCD shall be installed so that there is no pressure on the LSI chips. 3) The LCD shall be installed flat, without twisting or bending. 4) A transparent protection sheet is attached to the polarizer. Please remove the protection film slowly before use, paying attention to static electricity. 12-2. Static electricity 1) Since CMOS ICs are mounted directly onto the LCD glass, protection from static electricity is required. 2) Workers should use body grounding. Operator should wear ground straps. 12-3. LCD operation 1) The LCD shall be operated within the limits specified. Operation at values outside of these limits may shorten life, and/or harm display images. 12-4. Storage 1) The LCD shall be stored within the temperature and humidity limits specified. Store in a dark area, and protect the LCD from direct sunlight or fluorescent light. 2) Always store the LCD so that it is free from external pressure onto it. 12-5. Usage 1) DO NOT store in a high humidity environment for extended periods. Polarizer degradation bubbles, and/or peeling off of the polarizer may result. 2) The front polarizer is easily scratched or damaged. Prevent touching it with any hard material, and from being pushed or rubbed. 3) The LCD screen may be cleaned by wiping the screen surface with a soft cloth or cotton pad using a little Ethanol. 4) Water may cause damage or discoloration of the polarizer. Clean condensation or moisture from any source immediately. 5) Always keep the LCD free from condensation during testing. Condensation may permanently spot or stain the polarizer. 6) Do not disassemble LCD because it will result in damage. 7) This Kyocera LCD has been specifically designed for use in general electronic devices, but not for use in a special environment such as usage in an active gas. Hence, when the LCD is supposed to be used in a special environment, evaluate the LCD thoroughly beforehand and do not expose the LCD to chemicals such as an active gas. 8) Please do not use solid-base image pattern for long hours because a temporary afterimage may appear. We recommend using screen saver etc. in cases where a solid-base image pattern must be used. 9) Liquid crystal may leak when the LCD is broken. Be careful not to let the fluid go into your eyes and mouth. In the case the fluid touches your body; rinse it off right away with water and soap. M303011                                Spec No. Part No. TQ3C-8EAF0-E1YAD29-00 Page TCG035QVLPDANN-AN50 13. Reliability test data   Test item Test condition Test time High temp. atmosphere 80°C 240h Low temp. atmosphere -30°C 240h High temp. humidity atmosphere 40°C 90% RH 240h Temp. cycle -30°C 0.5h R.T. 0.5h 80°C 0.5h 10cycles High temp. operation 70°C 500h 1) 2) 3) 4)   Judgement Display function Display quality Current consumption Display function Display quality Current consumption Display function Display quality Current consumption Display function Display quality Current consumption Display function Display quality Current consumption : No defect : No defect : No defect : No defect : No defect : No defect : No defect : No defect : No defect : No defect : No defect : No defect : No defect : No defect : No defect Each test item uses a test LCD only once. The tested LCD is not used in any other tests. The LCD is tested in circumstances in which there is no condensation. The reliability test is not an out-going inspection. The result of the reliability test is for your reference purpose only. The reliability test is conducted only to examine the LCD's capability. M303011                                14 Spec No. Date TQ3C-8EAF0-E2YAD29-00 June 2, 2014 KYOCERA INSPECTION STANDARD TYPE : TCG035QVLPDANN-AN50 KYOCERA DISPLAY CORPORATION Original Issue Date Designed by : Engineering dept. Prepared Checked Approved Confirmed by : QA dept. Checked Approved June 2, 2014                                         Spec No. Part No. TQ3C-8EAF0-E2YAD29-00 Revision record Designed by : Engineering dept. Date Rev.No. Prepared Date Page Checked Approved Page TCG035QVLPDANN-AN50 Confirmed by : QA dept. Checked Descriptions Approved - Spec No.  Part No. TQ3C-8EAF0-E2YAD29-00  Page TCG035QVLPDANN-AN50 1  Visuals specification 1) Note Note General 1. Customer identified anomalies not defined within this inspection standard shall be reviewed by Kyocera, and an additional standard shall be determined by mutual consent. 2. This inspection standard about the image quality shall be applied to any defect within the effective viewing area and shall not be applicable to outside of the area. 3. Definition of Inspection conditions Luminance : 500 Lux min. Inspection distance : 300 mm. Temperature : 25 s 5Υ Direction      : Directly above Dot defect Bright dot defect inspection item The dot is constantly “on” when power applied to the LCD, even when all “Black” data sent to the screen. Inspection tool: 5% Transparency neutral density filter. Count dot: If the dot is visible through the filter. Don’t count dot: If the dot is not visible through the filter. 䠮 䠣 䠞 䠮 䠣 䠞 䠮 䠣 䠞 䠮 䠣 䠞 䠮 䠣 䠞 䠮 䠣 䠞 dot defect 䠮 䠣 䠞 䠮 䠣 䠞 䠮 䠣 䠞 Black dot defect  The dot is constantly “off” when power applied to the LCD, even when all “White” data sent to the screen. Adjacent dot Adjacent dot defect is defined as two or more bright dot defects or black dot defects. 䠮 䠣 䠞 䠮 䠣 䠞 䠮 䠣 䠞 䠮 䠣 䠞 䠮 䠣 䠞 䠮 䠣 䠞 dot defect 䠮 䠣 䠞 䠮 䠣 䠞 䠮 䠣 䠞  External Bubble, Scratch, Visible operating (all pixels “Black” or “White”) and non inspection Foreign particle operating. (Polarizer, Cell, Backlight) Appearance Does not satisfy the value at the spec. inspection Others LED wires Damaged to the LED wires, connector, pin, functional failure or appearance failure. Definition Definition of circle size Definition of linear size of size 㹢㸻(㹟㸩㹠)/2   Spec No.  Part No. TQ3C-8EAF0-E2YAD29-00  Page TCG035QVLPDANN-AN50 2  2) Standard Classification Defect Dot (in LCD defect glass) Inspection item Bright dot defect Black dot defect :4 Bright dot spacing : 5 mm or more Acceptable number :5 : 5 mm or more Acceptable number :2 Acceptable number :3 3 or more dots join Acceptable number :0 Total dot defects Acceptable number : 5 Max Bright dot defect Black dot defect White dot, Dark dot (Circle) External inspection Acceptable number Black dot spacing 2 dot join Others Judgement standard Size (mm) 0.2 㸺 d ӌ 0.2 0.2 㸺 d ӌ 0.4 0.4 㸺 d ӌ 0.5 0.5 㸺 d ӌ 0.4 Acceptable number (Neglected) 5 3 0 Polarizer (Scratch) (Defect on Polarizer or Width (mm) 0.1 㸺 W ӌ 0.1 between Polarizer 0.1 㸺 W ӌ 0.3 and LCD glass) 0.3 㸺 W ӌ 0.3 Length (mm) 㸫 2.0 㸺 L ӌ 5.0 5.0 㸺 L ӌ 5.0 㸫 Acceptable number 1HJOHFWHG 1HJOHFWHG 0 0 Polarizer (Bubble) Size (mm) 0.2 㸺 d ӌ 0.2 0.2 㸺 d ӌ 0.3 0.3 㸺 d ӌ 0.5 0.5 㸺 d ӌ 0.4 Acceptable number (Neglected) 5 3 0 Size (mm) 0.2 㸺 d ӌ 0.2 0.2 㸺 d ӌ 0.4 0.4 㸺 d ӌ 0.5 0.5 㸺 d ӌ0 .4 Acceptable number (Neglected) 5 3 0 Foreign particle 㸦Circular shape㸧 Foreign particle 㸦Linear shape㸧 Scratch Width (mm) 0.00 㸺 W ӌ 0.03 0.03 㸺 W ӌ 0.10 0.1 㸺 W ӌ0.3 Length (mm) 㸫 2.0 㸺 L ӌ 2.0 2.0 㸺 L ӌ 4.0 4.0 㸺 L ӌ 5.0 㸫 Acceptable number 1HJOHFWHG 1HJOHFWHG 3 0 (According to circular shape)