Spec No.
Date
SPEC
TQ3C-8EAF0-E1YAA125-01
September 24, 2014
TYPE : TCG070WVLPEANN-AN50
< 7.0 inch WVGA transmissive color TFT with LED backlight >
CONTENTS
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
Application
Construction and outline
Mechanical specifications
Absolute maximum ratings
Electrical characteristics
Optical characteristics
Interface signals
Input timing characteristics
Backlight characteristics
Lot number identification
Warranty
Precautions for use
Reliability test data
Outline drawing
Nov 4, 2014
KYOCERA DISPLAY CORPORATION
This specification is subject to change without notice.
Consult Kyocera before ordering.
Original
Issue Date
July 23, 2013
Designed by: Engineering dept.
Prepared
Checked
Confirmed by: QA dept.
Approved
Checked
Approved
Spec No.
TQ3C-8EAF0-E1YAA125-01
Part No.
Page
TCG070WVLPEANN-AN50
Warning
1. This Kyocera LCD module has been specifically designed for use only in
electronic devices and industrial machines in the area of audio control,
office automation, industrial control, home appliances, etc. The module
should not be used in applications where the highest level of safety and
reliability are required and module failure or malfunction of such module
results in physical harm or loss of life, as well as enormous damage or loss.
Such fields of applications include, without limitation, medical, aerospace,
communications infrastructure, atomic energy control. Kyocera expressly
disclaims any and all liability resulting in any way to the use of the module
in such applications.
2. Customer agrees to indemnify, defend and hold Kyocera harmless
from and against any and all actions, claims, damages, liabilities,
awards, costs, and expenses, including legal expenses, resulting from or
arising out of Customer's use, or sale for use, or Kyocera modules in
applications.
Caution
1. Kyocera shall have the right, which Customer hereby acknowledges, to
immediately scrap or destroy tooling for Kyocera modules for which no
Purchase Orders have been received from the Customer in a two-year period.
-
Spec No.
Part No.
TQ3C-8EAF0-E1YAA125-01
Revision record
Designed by : Engineering dept.
Prepared
Checked
Approved
Date
TCG070WVLPEANN-AN50
Confirmed by : QA dept.
Checked
Approved
September 24, 2014
Rev.No.
Date
Page
01
Sep 24, 2014
17
Descriptions
9.Backlight characteristics
change Operating life time Typ70,000h Ѝ100,000㹦
Page
-
Spec No.
Part No.
TQ3C-8EAF0-E1YAA125-01
Page
TCG070WVLPEANN-AN50
1
1. Application
This document defines the specification of TCG070WVLPEANN-AN50.
(RoHS Compliant)
2. Construction and outline
: Transmissive color dot matrix type TFT
: LED
: Anti-Glare treatment
: LVDS
: Timing controller, Power supply (3.3V input)
Without Constant current circuit for LED Backlight
LCD
Backlight system
Polarizer
Interface
Additional circuit
3. Mechanical specifications
Item
Specification
Unit
165(W)×(104.4)(H)×8.6(D)
mm
Active area
152.4(W)×91.44(H)
(17.8cm/7.0 inch(Diagonal))
mm
Dot format
800×(R,G,B)(W)×480(H)
dot
0.0635(W)×0.1905(H)
mm
Normally White
-
205
g
Outline dimensions 1)
Dot pitch
Base color
Mass
2)
1) Projection not included. Please refer to outline for details.
2) Due to the characteristics of the LCD material, the color varies with environmental temperature.
M407011
Spec No.
Part No.
TQ3C-8EAF0-E1YAA125-01
Page
TCG070WVLPEANN-AN50
2
4. Absolute maximum ratings
4-1. Electrical absolute maximum ratings
Item
Symbol
Min.
Max.
Unit
Supply voltage(+3.3V)
VDD
-0.3
4.0
V
RxINi+, RxINi- 1)
Input signal
CK IN+, CK INvoltage 2)
SELLVDS, BITSEL, SC
VI1
-0.3
2.8
V
VI2
-0.3
2.8
V
VI3
-0.3
VDD+0.5
V
1) i=0,1,2,3
2) VDD must be supplied correctly within the range described in 5-1.
4-2. Environmental absolute maximum ratings
Item
Symbol
Min.
Max.
Unit
Operating temperature
1)
TOP
-20
70
°C
Storage temperature
2)
TSTO
-30
80
°C
Operating humidity
3)
HOP
10
4)
%RH
Storage humidity
3)
HSTO
10
4)
%RH
Vibration
-
5)
5)
-
Shock
-
6)
6)
-
1) Operating temperature means a temperature which operation shall be guaranteed. Since display
performance is evaluated at 25°C, another temperature range should be confirmed.
2) Temp. = -30°C㸺48h , Temp. = 80°C㸺168h
Store LCD at normal temperature/humidity. Keep them free from vibration and shock.
An LCD that is kept at a low or a high temperature for a long time can be defective due to
other conditions, even if the low or high temperature satisfies the standard.
(Please refer to “Precautions for Use” for details.)
3)
4)
5)
Non-condensing
Temp.ӌ40°C, 85%RH Max.
Temp.㸼40°C, Absolute humidity shall be less than 85%RH at 40°C.
Frequency
10㹼55 Hz
Vibration width
0.15mm
Interval
10-55-10 Hz
Acceleration value
(0.3㹼9 m/s2)
㸯minutes
2 hours in each direction X, Y, Z (6 hours total)
EIAJ ED-2531
6) Acceleration: 490 m/s2, Pulse width: 11 ms
3 times in each direction: ±X, ±Y, ±Z
EIAJ ED-2531
M407011
Spec No.
Part No.
TQ3C-8EAF0-E1YAA125-01
Page
3
TCG070WVLPEANN-AN50
5. Electrical characteristics
Item
Temp. = -20㹼70°C
Symbol
Condition
Min.
Typ.
Max.
Unit
VDD
-
3.0
3.3
3.6
V
Current consumption
IDD
2)
-
200
260
mA
Permissive input ripple voltage
VRP
VDD=3.3V
-
-
100
mVp-p
VIL
"Low" level
0
-
0.8
V
VIH
"High" level
2.0
-
VDD
V
IOL
VI3=0V
-10
-
10
ȣA
IOH
VI3=3.3V
-
-
400
ȣA
Supply voltage
Input signal voltage
1)
3)
Input reek current
LVDS Input voltage
4)
VL
-
0
-
1.9
V
Differential input voltage
4)
VID
-
250
350
450
mV
Differential input
threshold voltage
4) 5)
VTL
"Low" level
VCM-100
-
-
mV
VTH
"High" level
-
-
VCM+100
mV
R1
-
-
100
-
Ȑ
t1
-
0.1
-
10
ms
t2
-
0
-
-
ms
t3
-
0
-
-
ms
t4
-
1.0
-
-
s
t5
-
200
-
-
ms
t6
-
200
-
-
ms
t7
-
0
-
10
s
t8
-
0
-
-
ms
Terminator
VDD-turn-on conditions
1)
1) VDD-turn-on conditions
LED ON
M407011
Spec No.
Part No.
TQ3C-8EAF0-E1YAA125-01
TCG070WVLPEANN-AN50
2) Display pattern:
VDD = 3.3V, Temp. = 25°C
123 456
1
2
3
:
:
:
479
480
(dot)
࣭࣭࣭࣭࣭࣭࣭࣭࣭࣭࣭࣭࣭࣭࣭࣭2398 2399 2400(dot)
ڦڦڦڦڦڦڦڦڦڦڦڦڦڦڦڦڦڦڦڦڦڦ
ڦڦڦڦڦڦڦڦڦڦڦڦڦڦڦڦڦڦڦڦڦڦ
ڦڦڦڦڦڦڦڦڦڦڦڦڦڦڦڦڦڦڦڦڦڦ
ڦڦڦڦڦڦڦڦڦڦڦڦڦڦڦڦڦڦڦڦڦڦ
ڦڦڦڦڦڦڦڦڦڦڦڦڦڦڦڦڦڦڦڦڦڦ
ڦڦڦڦڦڦڦڦڦڦڦڦڦڦڦڦڦڦڦڦڦڦ
ڦڦڦڦڦڦڦڦڦڦڦڦڦڦڦڦڦڦڦڦڦڦ
ڦڦڦڦڦڦڦڦڦڦڦڦڦڦڦڦڦڦڦڦڦڦ
3) Input signal : SELLVDS, BITSEL, SC
4) Input signal : RxIN3+, RxIN3-, RxIN2+, RxIN2-, RxIN1+, RxIN1-, RxIN0+, RxIN0CK IN+, CK IN-
㼂㻵㻰
㼂㻸
㼂㻯㻹
㻜㼂
5) VCM : LVDS Common mode voltage (VCM=1.25V)
6) Please power on LVDS transmitter at the same time as VDD, or LVDS transmitter should be
powered on first.
M407011
Page
4
Spec No.
Part No.
TQ3C-8EAF0-E1YAA125-01
Page
5
TCG070WVLPEANN-AN50
6. Optical characteristics
Item
Response time
Measuring spot =ȭ6.0mm, Temp. = 25°C
Symbol
Condition
Min.
Typ.
Max.
Unit
Rise
Ǖr
ȟ=ȭ=0°
-
5
-
ms
Down
Ǖd
ȟ=ȭ=0°
-
25
-
ms
ȟUPPER
-
60
-
ȟLOWER
-
80
-
-
80
-
-
80
-
Viewing angle range
View direction
: 12 o’clock
(Gray inversion)
CRӍ10
ȭLEFT
䃥RIGHT
Contrast ratio
Brightness
ȟ=ȭ=0°
700
1000
-
-
L
IF=60mA/Line
490
700
-
cd/m2
0.550
0.600
0.650
0.300
0.350
0.400
0.270
0.320
0.370
0.500
0.550
0.600
0.100
0.150
0.200
0.070
0.120
0.170
0.240
0.290
0.340
0.255
0.305
0.355
y
x
Green
y
Chromaticity
coordinates
x
Blue
y
x
White
y
ȟ=ȭ=0°
ȟ=ȭ=0°
ȟ=ȭ=0°
ȟ=ȭ=0°
6-1. Definition of contrast ratio
CR(Contrast ratio) 㸻
Brightness with all pixels "White"
Brightness with all pixels "Black"
6-2. Definition of response time
:KLWH
%ODFN
%ULJKWQHVV
:KLWH
ȫU
deg.
CR
x
Red
deg.
ȫG
M407011
-
Spec No.
Part No.
TQ3C-8EAF0-E1YAA125-01
Page
TCG070WVLPEANN-AN50
6-3. Definition of viewing angle
ȭ r
ȟ833(5
\
ȟ r
\
ȟ/2:(5
ȭ/()7
[
[
ȭ5,*+7
[
[
\
\
ȭGLUHFWLRQ
ȟGLUHFWLRQ
6-4. Brightness measuring points
200×3
120
1
600×3
(dot)
4
3
240
360
400×3
2
5
(dot)
1) Rating is defined as the white brightness at center of display screen(3).
2) 5 minutes after LED is turned on. (Ambient Temp.=25Υ)
M407011
6
Spec No.
Part No.
TQ3C-8EAF0-E1YAA125-01
Page
7
TCG070WVLPEANN-AN50
7. Interface signals
7-1. Interface signals
No.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
Symbol
BITSEL
SELLVDS
GND
GND
RxIN3+
RxIN3GND
CK IN+
CK INGND
RxIN2+
RxIN2GND
RxIN1+
RxIN1GND
RxIN0+
RxIN0GND
GND
VDD
VDD
SC
NC
NC
NC
AN1
AN2
CN1
CN2
LCD connector
Matching connector
Description
Bit data select signal(GND or Open: 8bit modeࠊHigh: 6bit mode)
Mode select signal(LVDS Data mapping)
GND
GND
LVDS receiver signal CH3(+)
LVDS receiver signal CH3(-)
GND
LVDS receiver signal CK(+)
LVDS receiver signal CK(-)
GND
LVDS receiver signal CH2(+)
LVDS receiver signal CH2(-)
GND
LVDS receiver signal CH1(+)
LVDS receiver signal CH1(-)
GND
LVDS receiver signal CH0(+)
LVDS receiver signal CH0(-)
GND
GND
+3.3V power supply
+3.3V power supply
Scan direction control(High or Open: NormalࠊGND: Reverse)
NC
NC
NC
Anode1
Anode2
Cathode1
Cathode2
㸸 MDF76GW-30S-1H(55)
㸸 MDF76-30P-1C
(HIROSE)
(HIROSE)
LVDS receiver
㸸 Embedded in ASIC
Matching LVDS transmitter 㸸 THC63LVDM83R(THine Electronics) or compatible
1) Scanning
SC : High or Open
SC : GND
M407011
Note
LVDS
LVDS
LVDS
LVDS
LVDS
LVDS
LVDS
LVDS
LVDS
LVDS
1)
Spec No.
Part No.
TQ3C-8EAF0-E1YAA125-01
Page
TCG070WVLPEANN-AN50
7-2. Data mapping (6bit input / 8bit mode)
1) Location of BITSEL, SELLVDS (THC63LVDM83R(THine Electronics) or compatible)
Transmitter
1Pin BITSEL
= "L" or OPEN 1Pin BITSEL
= "L" or OPEN
2Pin SELLVDS = "L" or OPEN 2Pin SELLVDS = "H"
Pin No.
Data
㸫
R0(LSB)
51
TA0
TA1
㸫
R1
52
TA2
㸫
R2
54
TA3
㸫
R3
55
TA4
㸫
R4
56
TA5
㸫
3
R5(MSB)
TA6
㸫
G0(LSB)
4
㸫
G1
6
TB0
TB1
㸫
G2
7
TB2
㸫
G3
11
TB3
㸫
G4
12
TB4
㸫
14
G5(MSB)
TB5
㸫
B0(LSB)
15
TB6
㸫
B1
19
㸫
B2
20
TC0
TC1
㸫
B3
22
TC2
㸫
B4
23
TC3
㸫
24
B5(MSB)
TC4
㸫
(HS)
27
TC5
㸫
(VS)
28
TC6
㸫
DE
30
㸫
GND
50
TD0
TD1
㸫
GND
2
TD2
GND
㸫
8
TD3
GND
㸫
10
TD4
GND
㸫
16
TD5
GND
㸫
18
TD6
㸫
25
GND
BITSEL=L(GND) or OPEN
SELLVDS=H(3.3V)
1 CYCLE
R1
G0
R5
R4
R3
R2
R1
R0
G0
G1
B1
B0
G5
G4
G3
G2
G1
B1
B2
DE
(VS)
(HS)
B5
B4
B3
B2
DE
DE㸸DATA ENABLE
HS㸸HSYNC
VS㸸VSYNC
M407011
8
Spec No.
TQ3C-8EAF0-E1YAA125-01
Part No.
TCG070WVLPEANN-AN50
2) Block Diagram
BITSEL=L(GND) or OPEN
SELLVDS=H(3.3V)
ͤSELLVDS signal line has 10㹩Ȑ pulldown resister.
M407011
Page
9
Spec No.
TQ3C-8EAF0-E1YAA125-01
Part No.
TCG070WVLPEANN-AN50
Page
10
When using ͆6-bit Transmitter͇, please connect the unused channel of the control IC receiver
as described in the diagram below.
ͤSELLVDS signal line has 10㹩Ȑ pulldown resister.
M407011
Spec No.
Part No.
TQ3C-8EAF0-E1YAA125-01
Page
TCG070WVLPEANN-AN50
7-3. Data mapping (8bit input / 8bit mode)
1) Location of BITSEL, SELLVDS (THC63LVDM83R(THine Electronics) or compatible)
Transmitter
1Pin BITSEL
= "L" or OPEN 1Pin BITSEL
= "L" or OPEN
2Pin SELLVDS = "L" or OPEN 2Pin SELLVDS = "H"
Pin No.
Data
R0(LSB)
R2
51
TA0
TA1
R1
R3
52
TA2
R2
R4
54
TA3
R3
R5
55
TA4
R4
R6
56
TA5
R5
3
R7(MSB)
TA6
G0(LSB)
G2
4
G1
G3
6
TB0
TB1
G2
G4
7
TB2
G3
G5
11
TB3
G4
G6
12
TB4
G5
14
G7(MSB)
TB5
B0(LSB)
B2
15
TB6
B1
B3
19
B2
B4
20
TC0
TC1
B3
B5
22
TC2
B4
B6
23
TC3
B5
24
B7(MSB)
TC4
(HS)
(HS)
27
TC5
(VS)
(VS)
28
TC6
DE
DE
30
R6
R0(LSB)
50
TD0
TD1
R7(MSB)
R1
2
TD2
G6
G0(LSB)
8
TD3
G7(MSB)
G1
10
TD4
B6
B0(LSB)
16
TD5
B7(MSB)
B1
18
TD6
(NA)
25
(NA)
BITSEL=L(GND) or OPEN
SELLVDS=L(GND) or OPEN
1 CYCLE
R1
R0
G0
R5
R4
R3
R2
R1
R0
G0
G2
G1
B1
B0
G5
G4
G3
G2
G1
B1
B3
B2
DE
(VS)
(HS)
B5
B4
B3
B2
DE
㻾㻣
㻾㻢
㻺㻭
㻮㻣
㻮㻢
㻳㻣
㻳㻢
㻾㻣
㻾㻢
㻺㻭
DE㸸DATA ENABLE
HS㸸HSYNC
VS㸸VSYNC
M407011
11
Spec No.
Part No.
TQ3C-8EAF0-E1YAA125-01
TCG070WVLPEANN-AN50
BITSEL=L(GND) or OPEN
SELLVDS=H(3.3V)
1 CYCLE
R3
R2
G2
R7
R6
R5
R4
R3
R2
G2
G4
G3
B3
B2
G7
G6
G5
G4
G3
B3
B5
B4
DE
(VS)
(HS)
B7
B6
B5
B4
DE
㻾㻝
㻾㻜
㻺㻭
㻮㻝
㻮㻜
㻳㻝
㻳㻜
㻾㻝
㻾㻜
㻺㻭
DE㸸DATA ENABLE
HS㸸HSYNC
VS㸸VSYNC
2) Block Diagram
BITSEL=L(GND) or OPEN
SELLVDS=L(GND) or OPEN
ͤSELLVDS signal line has 10㹩Ȑ pulldown resister.
M407011
Page
12
Spec No.
TQ3C-8EAF0-E1YAA125-01
Part No.
TCG070WVLPEANN-AN50
BITSEL=L(GND) or OPEN
SELLVDS=H(3.3V)
ͤSELLVDS signal line has 10㹩Ȑ pulldown resister.
M407011
Page
13
Spec No.
Part No.
TQ3C-8EAF0-E1YAA125-01
TCG070WVLPEANN-AN50
7-4. Data mapping (6bit input / 6bit mode)
1) Location of BITSEL, SELLVDS (THC63LVDM83R(THine Electronics) or compatible)
Transmitter
1Pin BITSEL
= "H"
1Pin BITSEL
= "H"
2Pin SELLVDS = "L" or OPEN 2Pin SELLVDS = "H"
Pin No.
Data
㸫
R0(LSB)
44
TA0
TA1
㸫
R1
45
TA2
㸫
R2
47
TA3
㸫
R3
48
TA4
㸫
R4
1
TA5
㸫
3
R5(MSB)
TA6
㸫
G0(LSB)
4
㸫
G1
6
TB0
TB1
㸫
G2
7
TB2
㸫
G3
9
TB3
㸫
G4
10
TB4
㸫
12
G5(MSB)
TB5
㸫
B0(LSB)
13
TB6
㸫
B1
15
㸫
B2
16
TC0
TC1
㸫
B3
18
TC2
㸫
B4
19
TC3
㸫
20
B5(MSB)
TC4
㸫
(HS)
22
TC5
㸫
(VS)
23
TC6
㸫
DE
25
BITSEL=H(3.3V)
SELLVDS=L(GND) or OPEN
1 CYCLE
R1
R0
G0
R5
R4
R3
R2
R1
R0
G0
G2
G1
B1
B0
G5
G4
G3
G2
G1
B1
B3
B2
DE
(VS)
(HS)
B5
B4
B3
B2
DE
㻾㻣
㻾㻢
㻺㻭
㻮㻣
㻮㻢
㻳㻣
㻳㻢
㻾㻣
㻾㻢
㻺㻭
DE㸸DATA ENABLE
HS㸸HSYNC
VS㸸VSYNC
M407011
Page
14
Spec No.
TQ3C-8EAF0-E1YAA125-01
Part No.
TCG070WVLPEANN-AN50
2) Block Diagram
BITSEL=H(3.3V)
SELLVDS=L(GND) or OPEN
ͤSELLVDS signal line has 10㹩Ȑ pulldown resister.
M407011
Page
15
Spec No.
Part No.
TQ3C-8EAF0-E1YAA125-01
Page
16
TCG070WVLPEANN-AN50
8. Input timing characteristics
8-1. Timing characteristics
Item
Clock (CK)
Enable signal
(DE)
Refresh rate
Frequency
Symbol
Min.
Typ.
Max.
Unit
1/Tc
29.88
33.20
36.52
MHz
1024
1056
1088
Tc
-
31.8
-
ȣs
Horizontal Period
Th
Horizontal display period
Thd
Vertical Period
Tv
Vertical display period
Tvd
fv
800
487
525
1)
Tc
550
480
50
Note
60
Th
Th
70
Hz
1) Please set a clock frequency, a vertical dormant period, and the horizontal dormant period
so that the Horizontal Period should not reach less than Min. value.
2) If the refresh rate reach less than Min. value, the deterioration of the display quality, flicker etc.,
may occur.(fv=1/Tv)
M407011
2)
Spec No.
Part No.
TQ3C-8EAF0-E1YAA125-01
Page
TCG070WVLPEANN-AN50
17
8-2. Input Data Signals and Display position on the screen
9. Backlight characteristics
Item
Forward current
Forward voltage
Operating life time
1)
2)
㻌㻌
3)
4)
1)
1)
2), 3)
Symbol
Min.
Typ.
Max.
Unit
Note
IF
-
60
-
mA
Ta=-20㹼70°C
-
18.9
22.1
V
IF=60mA, Ta=-20Υ
-
18.0
21.2
V
IF=60mA, Ta=25Υ
-
17.4
20.7
V
IF=60mA, Ta=70Υ
-
100,000
-
h
IF=60mA, Ta=25Υ
VF
T
For each “AN-CA”
When brightness decrease 50% of minimum brightness.
㻌 The average life of a LED will decrease when the LCD is operating at higher temperatures.
Life time is estimated data.(Condition : IF=60mA, Ta=25Υ in chamber).
An input current below 15mA may reduce the brightness uniformity of the LED backlight.
This is because the amount of light from each LED chip is different. Therefore, please evaluate carefully
before finalizing the input current.
M407011
Spec No.
Part No.
TQ3C-8EAF0-E1YAA125-01
Page
TCG070WVLPEANN-AN50
18
10. Lot number identification
The lot number shall be indicated on the back of the backlight case of each LCD.
TCG070WVLPEANN-AN50
-
ŌŌ - ŌŌ - Ō
ŅŅ
12
Ņ
3
MADE IN
Ņ
4
ŌŌŌŌŌ
Ņ
5
No1. - No5. above indicate
1. Year code
2. Month code
3. Date
4. Version Number
5. Country of origin (Japan or China)
Year
2013
2014
2015
2016
2017
2018
Code
3
4
5
6
7
8
Month
Jan.
Feb.
Mar.
Apr.
May
Jun.
Code
1
2
3
4
5
6
Month
Jul.
Aug.
Sep.
Oct.
Nov.
Dec.
Code
7
8
9
X
Y
Z
11. Warranty
11-1. Incoming inspection
Please inspect the LCD within one month after your receipt.
11-2. Production warranty
Kyocera warrants its LCD’s for a period of 12 months from the ship date. Kyocera shall, by mutual
agreement, replace or re-work defective LCD’s that are shown to be Kyocera’s responsibility.
M407011
Spec No.
TQ3C-8EAF0-E1YAA125-01
Part No.
Page
TCG070WVLPEANN-AN50
19
12. Precautions for use
12-1. Installation of the LCD
1) A transparent protection plate shall be added to protect the LCD and its polarizer.
2) The LCD shall be installed so that there is no pressure on the LSI chips.
3) The LCD shall be installed flat, without twisting or bending.
4) A transparent protection sheet is attached to the polarizer. Please remove the protection film
slowly before use, paying attention to static electricity.
5) Please design the housing window so that its edges are between the active area and the effective㻌
area of the LCD screen.
12-2. Static electricity
1) Since CMOS ICs are mounted directly onto the LCD glass, protection from static electricity is
required.
2) Workers should use body grounding. Operator should wear ground straps.
12-3. LCD operation
1) The LCD shall be operated within the limits specified. Operation at values outside of these limits
may shorten life, and/or harm display images.
2) Please select the best display pattern based on your evaluation because flicker, lines or
nonuniformity or unevenness can be visible depending on display patterns.
12-4. Storage
1) The LCD shall be stored within the temperature and humidity limits specified.
Store in a dark area, and protect the LCD from direct sunlight or fluorescent light.
2) Always store the LCD so that it is free from external pressure onto it.
12-5. Usage
1) DO NOT store in a high humidity environment for extended periods. Polarizer degradation bubbles,
and/or peeling off of the polarizer may result.
2) The front polarizer is easily scratched or damaged. Prevent touching it with any hard material, and
from being pushed or rubbed.
3) The LCD screen may be cleaned by wiping the screen surface with a soft cloth or cotton pad using a
little Ethanol.
4) Water may cause damage or discoloration of the polarizer. Clean condensation or moisture from
any source immediately.
5) Always keep the LCD free from condensation during testing. Condensation may permanently spot
or stain the polarizer.
6) Do not disassemble LCD because it will result in damage.
7) This Kyocera LCD has been specifically designed for use in general electronic devices, but not for
use in a special environment such as usage in an active gas. Hence, when the LCD is supposed to
be used in a special environment, evaluate the LCD thoroughly beforehand and do not expose the
LCD to chemicals such as an active gas.
8) Please do not use solid-base image pattern for long hours because a temporary afterimage may
appear. We recommend using screen saver etc. in cases where a solid-base image pattern must be
used.
9) Liquid crystal may leak when the LCD is broken. Be careful not to let the fluid go into your eyes
and mouth. In the case the fluid touches your body; rinse it off right away with water and soap.
M407011
Spec No.
Part No.
TQ3C-8EAF0-E1YAA125-01
Page
TCG070WVLPEANN-AN50
13. Reliability test data
Test item
Test condition
Test time
High temp.
atmosphere
80°C
240h
Low temp.
atmosphere
-30°C
240h
High temp.
humidity
atmosphere
40°C 90% RH
240h
Temp. cycle
-30°C 0.5h
R.T. 0.5h
80°C 0.5h
10cycles
High temp.
operation
70°C
500h
1)
2)
3)
4)
Judgement
Display function
Display quality
Current consumption
Display function
Display quality
Current consumption
Display function
Display quality
Current consumption
Display function
Display quality
Current consumption
Display function
Display quality
Current consumption
: No defect
: No defect
: No defect
: No defect
: No defect
: No defect
: No defect
: No defect
: No defect
: No defect
: No defect
: No defect
: No defect
: No defect
: No defect
Each test item uses a test LCD only once. The tested LCD is not used in any other tests.
The LCD is tested in circumstances in which there is no condensation.
The reliability test is not an out-going inspection.
The result of the reliability test is for your reference purpose only.
The reliability test is conducted only to examine the LCD's capability.
M407011
20
Spec No.
Date
TQ3C-8EAF0-E2YAA125-01
September 24, 2014
KYOCERA INSPECTION STANDARD
TYPE : TCG070WVLPEANN-AN50
KYOCERA DISPLAY CORPORATION
Original
Issue Date
Designed by : Engineering dept.
Prepared
Checked
Approved
Confirmed by : QA dept.
Checked
Approved
July 23, 2013
Spec No.
Part No.
TQ3C-8EAF0-E2YAA125-01
Date
Revision record
Designed by : Engineering dept.
Prepared
Checked
Approved
Page
TCG070WVLPEANN-AN50
Confirmed by : QA dept.
Checked
Approved
September 24, 2014
Rev.No.
01
Date
Sep 24, 2014
Page
Descriptions
Change “Definition of inspection item”, Bright dot defect
1
-
Spec No.
Part No.
TQ3C-8EAF0-E2YAA125-01
Page
TCG070WVLPEANN-AN50
1
Visuals specification
1) Note
Note
General
1.
Customer identified anomalies not defined within this inspection standard shall be
reviewed by Kyocera, and an additional standard shall be determined by mutual consent.
2.
This inspection standard about the image quality shall be applied to any defect within the
effective viewing area and shall not be applicable to outside of the area.
3.
Definition of
Inspection conditions
Luminance
: 500 Lux min.
Inspection distance
: 300 mm.
Temperature
: 25 s 5Υ
Direction
: Directly above
Dot defect
Bright dot defect
The dot is constantly “on” when power applied to the
inspection
LCD, even when all “Black” data sent to the screen.
item
Inspection tool: 5% Transparency neutral density filter.
Count dot: If the dot is visible through the filter.
Don’t count dot: If the dot is not visible through the
filter.
䠮 䠣 䠞 䠮 䠣 䠞 䠮 䠣 䠞
There is an electrode in the middle of the dot
䠮 䠣 䠞 䠮 䠣 䠞 䠮 䠣 䠞
and one dot is shown in the left drawing.
䠮 䠣 䠞 䠮 䠣 䠞 䠮 䠣 䠞 㸺dot drawing㸼
Black dot defect
The dot is constantly “off” when power applied to the
LCD, even when all “White” data sent to the screen.
Similar size compared to bright dot.
White dot
Pixel works electrically, however, circular/foreign
(Circular/foreign
particle makes dot appear to be “on” even when all
particle)
“Black” data is sent to the screen.
Adjacent dot
Adjacent dot defect is defined as two or more bright dot
defects or black dot defects.
䠮 䠣 䠞 䠮 䠣 䠞 䠮 䠣 䠞
䠮 䠣 䠞 䠮 䠣 䠞 䠮 䠣 䠞
䠮 䠣 䠞 䠮 䠣 䠞 䠮 䠣 䠞
External
inspection
dot defect
Bubble, Scratch,
Visible operating (all pixels “Black” or “White”) and non
Foreign particle
operating.
(Polarizer, Cell, Backlight)
Others
Appearance inspection
Does not satisfy the value at the spec.
CFL wires
Damaged to the CFL wires, connector, pin, functional
failure or appearance failure.
Definition
Definition of circle size
Definition of linear size
of size
㹢㸻(㹟㸩㹠)/2
Spec No.
Part No.
TQ3C-8EAF0-E2YAA125-01
Page
TCG070WVLPEANN-AN50
2
2) Standard
Classification
Defect
Dot
(in LCD
defect
glass)
Inspection item
Bright dot defect
Black dot defect
:4
Bright dot spacing
: 5 mm or more
Acceptable number
:5
: 5 mm or more
Acceptable number
:2
Acceptable number
:3
3 or more dots join
Acceptable number
:0
Total dot defects
Acceptable number
: 5 Max
Bright dot
defect
Black dot
defect
White dot, Dark dot
(Circle)
External inspection
Acceptable number
Black dot spacing
2 dot join
Others
Judgement standard
Size (mm)
0.2 㸺 d ӌ 0.2
0.2 㸺 d ӌ 0.4
0.4 㸺 d ӌ 0.5
0.5 㸺 d ӌ 0.4
Acceptable number
(Neglected)
5
3
0
Polarizer (Scratch)
(Defect on
Polarizer or
Width (mm)
0.1 㸺 W ӌ 0.1
between Polarizer
0.1 㸺 W ӌ 0.3
and LCD glass)
0.3 㸺 W ӌ 0.3
Length (mm)
㸫
2.0 㸺 L ӌ 5.0
5.0 㸺 L ӌ 5.0
㸫
Acceptable number
1HJOHFWHG
1HJOHFWHG
0
0
Polarizer (Bubble)
Size (mm)
0.2 㸺 d ӌ 0.2
0.2 㸺 d ӌ 0.3
0.3 㸺 d ӌ 0.5
0.5 㸺 d ӌ 0.4
Acceptable number
(Neglected)
5
3
0
Size (mm)
0.2 㸺 d ӌ 0.2
0.2 㸺 d ӌ 0.4
0.4 㸺 d ӌ 0.5
0.5 㸺 d ӌ0 .4
Acceptable number
(Neglected)
5
3
0
Foreign particle
㸦Circular shape㸧
Foreign particle
㸦Linear shape㸧
Scratch
Width (mm)
0.00 㸺 W ӌ 0.03
0.03 㸺 W ӌ 0.10
0.1 㸺 W
ӌ0.3
Length (mm)
㸫
2.0 㸺 L ӌ 2.0
2.0 㸺 L ӌ 4.0
4.0 㸺 L ӌ 5.0
㸫
Acceptable number
1HJOHFWHG
1HJOHFWHG
3
0
(According to
circular shape)