TCG070WVLQAPNN-AN04

Spec No. Date  SPEC TQ3C-8EAF0-E1YAA211-00 August 3, 2016 TYPE : TCG070WVLQAPNN-AN04 < 7 inch WVGA transmissive color TFT with LED backlight> CONTENTS 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. Application Construction and outline Mechanical specifications Absolute maximum ratings Electrical characteristics Optical characteristics Interface signals Input timing characteristics Backlight characteristics Lot number identification Warranty Precautions for use Reliability test data Outline drawing Aug 5, 2016 KYOCERA DISPLAY CORPORATION  This specification is subject to change without notice. Consult Kyocera before ordering.    Original Issue Date August 3, 2016 Designed by: Engineering dept. Prepared Checked Confirmed by: QA dept. Approved Checked Approved Spec No. TQ3C-8EAF0-E1YAA211-00 Part No. Page TCG070WVLQAPNN-AN04 Warning 1. This Kyocera LCD module has been specifically designed for use only in electronic devices and industrial machines in the area of audio control, office automation, industrial control, home appliances, etc. The module should not be used in applications where the highest level of safety and reliability are required and module failure or malfunction of such module results in physical harm or loss of life, as well as enormous damage or loss. Such fields of applications include, without limitation, medical, aerospace, communications infrastructure, atomic energy control. Kyocera expressly disclaims any and all liability resulting in any way to the use of the module in such applications. 2. Customer agrees to indemnify, defend and hold Kyocera harmless from and against any and all actions, claims, damages, liabilities, awards, costs, and expenses, including legal expenses, resulting from or arising out of Customer's use, or sale for use, or Kyocera modules in applications. Caution 1. Kyocera shall have the right, which Customer hereby acknowledges, to immediately scrap or destroy tooling for Kyocera modules for which no Purchase Orders have been received from the Customer in a two-year period. - Spec No. Part No. TQ3C-8EAF0-E1YAA211-00 Revision record Designed by : Engineering dept. Prepared Checked Approved Date Rev.No. Date Page TCG070WVLQAPNN-AN04 Confirmed by : QA dept. Checked Approved Descriptions Page - Spec No. Part No. TQ3C-8EAF0-E1YAA211-00 Page TCG070WVLQAPNN-AN04 1 1. Application This document defines the specification of TCG070WVLQAPNN-AN04. (RoHS Compliant) 2. Construction and outline LCD Backlight system Polarizer Additional circuit : Transmissive color dot matrix type TFT : LED : Anti-Glare treatment : Timing controller, Power supply (3.3V input) (without constant current circuit for LED Backlight) 3. Mechanical specifications Item Specification Unit Outline dimensions 1) 165(W)×(104.4)(H)×8.2(D) mm Active area 152.4(W)×91.44(H) (17.8cm/7 inch(Diagonal)) mm Dot format 800×(R,G,B)(W)×480(H) dot 0.0635(W)×0.1905(H) mm Normally Black - (200) g Dot pitch Base color Mass 2) 1) Projection not included. Please refer to outline for details. 2) Due to the characteristics of the LCD material, the color varies with environmental temperature. M303011 Spec No. Part No. TQ3C-8EAF0-E1YAA211-00 Page TCG070WVLQAPNN-AN04 2 4. Absolute maximum ratings 4-1. Electrical absolute maximum ratings Item Symbol Min. Max. Unit VDD -0.3 4.5 V Supply voltage Input signal voltage 1) VIN -0.3 4.5 V LED forward current 2) 3) IF - 100 mA 1) Input signal : CK, R0～R5, G0～G5, B0～B5, HSYNC, VSYNC, ENAB, CM, SC 2) For each “AN-CA” 3) Do not apply reversed voltage. 4-2. Environmental absolute maximum ratings Item Symbol Min. Max. Unit Operating temperature 1) TOP -20 70 °C Storage temperature 2) TSTO -30 80 °C Operating humidity 3) HOP 10 4) %RH Storage humidity 3) HSTO 10 4) %RH Vibration - 5) 5) - Shock - 6) 6) - 1) Operating temperature means a temperature which operation shall be guaranteed. Since display performance is evaluated at 25°C, another temperature range should be confirmed. 2) Temp. = -30°C＜48h , Temp. = 80°C＜168h Store LCD at normal temperature/humidity. Keep them free from vibration and shock. An LCD that is kept at a low or a high temperature for a long time can be defective due to other conditions, even if the low or high temperature satisfies the standard. (Please refer to “Precautions for Use” for details.) 3) Non-condensing 4) Temp.≦40°C, 85%RH Max. Temp.＞40°C, Absolute humidity shall be less than 85%RH at 40°C. 5) Frequency 10～55 Hz Vibration width 0.15mm Interval Acceleration value (0.3～9 m/s2) 10-55-10 Hz １minutes 2 hours in each direction X, Y, Z (6 hours total) EIAJ ED-2531 6) Acceleration: 490 m/s2, Pulse width: 11 ms 3 times in each direction: ±X, ±Y, ±Z EIAJ ED-2531 M303011 Spec No. Part No. TQ3C-8EAF0-E1YAA211-00 Page TCG070WVLQAPNN-AN04 3 5. Electrical characteristics Temp. = -20～70°C Item Symbol Condition Min. Typ. Max. Unit VDD - 3.0 3.3 3.6 V Current consumption IDD 2) - 160 210 mA Permissive input ripple voltage VRP VDD=3.3V - - 100 mVp-p VIL "Low" level 0 - 0.8 V VIH "High" level 2.0 - VDD V VIL "Low" level 0 - 0.3VDD V VIH "High" level 0.7VDD - VDD V Supply voltage 1) 3) Input signal voltage 4) 1) VDD-turn-on conditions 10ms(max.) 0.5ms(min.) VDD Signal *3 100ms(max.) 3.0V 0.2V 3.0V 30ms(max.) 0ms(min.) 0.8V 500ms(min.) 0.2V 30ms(max.) 0ms(min.) 0.2V 0.8V 2) Display pattern: VDD = 3.3V, Temp. = 25°C 1 2 3 ・・・・・・・・・・・・・・・2398 2399 2400(dot) 1 ■□■□■□■□■□■□■□■□■□■□■□ 2 □■□■□■□■□■□■□■□■□■□■□■ 3 ■□■□■□■□■□■□■□■□■□■□■□ : □■□■□■□■□■□■□■□■□■□■□■ : ■□■□■□■□■□■□■□■□■□■□■□ : □■□■□■□■□■□■□■□■□■□■□■ 479 ■□■□■□■□■□■□■□■□■□■□■□ 480 □■□■□■□■□■□■□■□■□■□■□■ (dot) 3) Input signal : CK, R0~R5, G0~G5, B0~B5, HSYNC, VSYNC, ENAB, CM 4) Input signal : SC M303011 Spec No. Part No. TQ3C-8EAF0-E1YAA211-00 Page 4 TCG070WVLQAPNN-AN04 6. Optical characteristics Measuring spot =φ6.0mm, Temp. = 25°C Item Response time Symbol Condition Min. Typ. Max. Unit Rise τr θ=φ=0° - 12 - ms Down τd θ=φ=0° - 18 - ms θUPPER - 85 - θLOWER - 85 - - 85 - - 85 - Viewing angle range CR≧10 φLEFT φRIGHT Contrast ratio Brightness Red Green Chromaticity coordinates Blue White θ=φ=0° 350 500 - - L IF=60mA/Line 350 500 - cd/m2 0.560 0.610 0.660 0.300 0.350 0.400 0.290 0.340 0.390 0.510 0.560 0.610 0.100 0.150 0.200 0.060 0.110 0.160 0.250 0.300 0.350 0.270 0.320 0.370 x y x y x y x y CR(Contrast ratio) ＝ M303011 deg. CR θ=φ=0° θ=φ=0° θ=φ=0° θ=φ=0° 6-1. Definition of contrast ratio 6-2. Definition of response time deg. Brightness with all pixels "White" Brightness with all pixels "Black" - Spec No. Part No. TQ3C-8EAF0-E1YAA211-00 Page TCG070WVLQAPNN-AN04 6-3. Definition of viewing angle φ=0° θUPPER +y θ=0° +y θLOWER φLEFT -x +x φRIGHT -x +x -y -y φ direction θ direction 6-4. Brightness measuring points 200×3 120 600×3 (dot) 4 1 3 240 360 400×3 2 5 (dot) 1) Rating is defined as the white brightness at center of display screen(3). 2) 5 minutes after LED is turned on. (Ambient Temp.=25℃) M303011 5 Spec No. TQ3C-8EAF0-E1YAA211-00 Part No. Page 6 TCG070WVLQAPNN-AN04 7. Interface signals 7-1. LCD No. 1 2 3 4 5 6 7 8 Symbol AN1 AN2 CA1 CA2 VDD VDD CM ENAB 9 VSYNC 10 HSYNC 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 GND B5 B4 B3 GND B2 B1 B0 GND G5 G4 G3 GND G2 G1 G0 GND R5 R4 R3 GND R2 R1 R0 SC GND GND CK GND GND Description Mode select signal(High or Open: Necessity of V･HSYNC、GND: Uunecessity of V･HSYNC) Data Enable (positive) Vertical synchronous signal (negative)(fix low or high: when CM fixed to GND) Horizontal synchronous signal (negative) (fix low or high: when CM fixed to GND) GND BLUE data signal (MSB) BLUE data signal BLUE data signal GND BLUE data signal BLUE data signal BLUE data signal (LSB) GND GREEN data signal (MSB) GREEN data signal GREEN data signal GND GREEN data signal GREEN data signal GREEN data signal (LSB) GND RED data signal (MSB) RED data signal RED data signal GND RED data signal RED data signal RED data signal (LSB) Scan direction control(GND or Open: Normal、High: Reverse) GND GND Sampling clock GND GND LCD connector Recommended matching FFC or FPC M303011 Note. Anode1 Anode2 Cathode1 Cathode2 3.3V power supply 3.3V power supply ： IMSA-9681S-40A-GF ： 0.5mm pitch (IRISO) 1) Spec No. TQ3C-8EAF0-E1YAA211-00 1) Scanning SC : GND or Open M303011 SC : High Part No. TCG070WVLQAPNN-AN04 Page 7 Spec No. Part No. TQ3C-8EAF0-E1YAA211-00 Page TCG070WVLQAPNN-AN04 8 8. Input timing characteristics 8-1. CM : High or Open（Necessity of V･HSYNC） 8-1-1. Timing characteristics Item Clock Data Data Enable Horizontal sync. signal Symbol Min. Typ. Max. Unit Frequency Fck 29.88 33.2 36.52 MHz Period Tc 27.4 30.1 33.5 ns High time Tch 12 - - ns Low time Tcl 12 - - ns Set up time Tds 5 - - ns Hold time Tdh 10 - - ns Set up time Tes 5 - - ns Hold time Teh 10 - - ns Set up time Ths 5 - - ns Hold time Thh 10 - - ns 944 1056 1088 Tc - 31.8 - μs Period Th Pulse width Thp 4 128 - Tc Front porch Thf - 40 - Tc Back porch Thb 7 88 - Tc Horizontal display period Vertical sync. signal Thd 800 Tc 516 525 534 Th 14.7 16.6 17.4 ms Tvp 1 2 - Th Front porch Tvf - 11 - Th Back porch Tvb 4 32 - Th Period Tv Pulse width Vertical display period Tvd 480 Note Th 1) In case of lower frequency, the deterioration of the display quality, flicker etc., may occur. 2) If CK is fixed to "H" or "L" level for certain period while ENAB is supplied, the panel may be damaged. 3) When dimming LED by PWM, please adjust LCD operating signal timing and LED driving frequency, to optimize the display quality. There is a possibility that flicker is observed by the interference of LCD operating signal timing and LED driving condition (especially driving frequency), even if the condition satisfies above timing specification. 4) Do not make Tv, Th, and Thp fluctuate. 5) CK count of each Horizontal Scanning Time should be always the same. Vertical invalid data period should be "n" X "Horizontal Scanning Time" . (n: integer) Frame period should be always the same. M303011 Spec No. Part No. TQ3C-8EAF0-E1YAA211-00 Page TCG070WVLQAPNN-AN04 8-1-2. Input timing characteristics Horizontal Sync. signal (Hsync) 水平同期信号(Hsync) Data イネーブル信号(ENAB) Enable signal(ENAB) データ信号 Data signal (R0～R5,G0～G5,B0～B5) 2.0V 0.8V Ths,Tes,Tds Thh,Teh,Tdh Tch Tcl Clock signal クロック信号 (CK) Tc Tv Vertical Sync. signal 垂直同期信号 (Vsync) Tvp Tvb Tvd Tvf Horizontal Sync. signal 水平同期信号 (Hsync) Data signal データ信号 (R0～R5,G0～G5, 垂直非データ領域 Vertical invalid data period DH1 DH2 DH3 DH479 DH480 Vertical垂直非データ領域 invalid data period B0～B5) Data Enable signal イネーブル信号 (ENAB) Th Horizontal Sync. signal 水平同期信号 (Hsync) Thp Clock signal クロック信号 (CK) Thb Data signal データ信号 (R0～R5,G0～G5, Horizontal invalid data period 水平非データ領域 Thf D1 D2 D3 D799 B0～B5) Thd Data Enable signal イネーブル信号 (ENAB) M303011 D800 Horizontal invalid data period 水平非データ領域 9 Spec No. Part No. TQ3C-8EAF0-E1YAA211-00 Page TCG070WVLQAPNN-AN04 10 8-2．CM : GND（Uunecessity of V･HSYNC） 8-2-1. Timing characteristics Item Clock Data Enable Symbol Min. Typ. Max. Unit Frequency Fck 29.88 33.2 36.52 MHz Period Tc 27.4 30.1 33.5 ns High time Tch 12 - - ns Low time Tcl 12 - - ns Set up time Tds 5 - - ns Hold time Tdh 10 - - ns Set up time Tes 5 - - ns Hold time Teh 10 - - ns Period Th 1024 1056 1088 Tc - 31.8 - μs Horizontal display period Thd Period Tv Vertical display period Tvd 800 Tc 487 525 550 Th 14.7 16.6 17.4 ms 480 Note Th 1) In case of lower frequency, the deterioration of the display quality, flicker etc., may occur. 2) If CK is fixed to "H" or "L" level for certain period while ENAB is supplied, the panel may be damaged. 3) When dimming LED by PWM, please adjust LCD operating signal timing and LED driving frequency, to optimize the display quality. There is a possibility that flicker is observed by the interference of LCD operating signal timing and LED driving condition (especially driving frequency), even if the condition satisfies above timing specification. 4) Do not make Tv, Th, and Thp fluctuate. 5) CK count of each Horizontal Scanning Time should be always the same. Vertical invalid data period should be "n" X "Horizontal Scanning Time" . (n: integer) Frame period should be always the same. M303011 Spec No. Part No. TQ3C-8EAF0-E1YAA211-00 Page TCG070WVLQAPNN-AN04 11 8-2-2. Input timing characteristics Tcl Tc Tch Clock signal (CK) Tdh Data signal (R0～R5,G0～G5, B0～B5) Tds Horizontal invalid data period D1 Teh D2 D799 Horizontal invalid data period D800 Tes Enable signal (ENAB) Clock signal (CK) Data signal (R0～R5,G0～G5, B0～B5) Horizontal invalid data period D1 D2 D799 D800 Horizontal invalid data period D1 D2 Th Enable signal (ENAB) Thd Data signal (R0～R5,G0～G5, B0～B5) DH479 DH480 Vertical invalid data period DH1 DH2 DH3 DH479 DH480 Tv Enable signal (ENAB) Tvd 8-3. Input Data Signals and Display position on the screen D1, DH1 D1, DH2 D2, DH2 D2, DH3 D3, DH1 D3, DH2 D800, DH1 R D1, DH480 D2, DH480 D3, DH480 M303011 G B Vertical invalid data period Spec No. Part No. TQ3C-8EAF0-E1YAA211-00 Page TCG070WVLQAPNN-AN04 12 9. Backlight characteristics Item Forward current Forward voltage Operating life time 1) 1) 2), 3) Symbol Min. Typ. Max. Unit Note IF - 60 - mA Ta=-20～70°C - 18.9 22.1 V IF=60mA, Ta=-20℃ - 18.0 21.2 V IF=60mA, Ta=25℃ - 17.4 20.7 V IF=60mA, Ta=70℃ - 100,000 - h IF=60mA, Ta=25℃ VF T 1) For each “AN-CA” 2) When brightness decrease 50% of minimum brightness. The average life of a LED will decrease when the LCD is operating at higher temperatures. 3) Life time is estimated data. (Condition : IF=60mA, Ta=25℃ in chamber). 4) An input current below 15mA may reduce the brightness uniformity of the LED backlight. This is because the amount of light from each LED chip is different. Therefore, please evaluate carefully before finalizing the input current. M303011 Spec No. Part No. TQ3C-8EAF0-E1YAA211-00 Page TCG070WVLQAPNN-AN04 13 10. Lot number identification The lot number shall be indicated on the back of the backlight case of each LCD. TCG070WVLQAPNN-AN04 - □□ - □□ - □ ↓↓ 12 ↓ 3 MADE IN ↓ 4 □□□□□ ↓ 5 No1. - No5. above indicate 1. Year code 2. Month code 3. Date 4. Version Number 5. Country of origin (Japan or China) Year 2016 2017 2018 2019 2020 2021 Code 6 7 8 9 0 1 Month Jan. Feb. Mar. Apr. May Jun. Code 1 2 3 4 5 6 Month Jul. Aug. Sep. Oct. Nov. Dec. Code 7 8 9 X Y Z 11. Warranty 11-1. Incoming inspection Please inspect the LCD within one month after your receipt. 11-2. Production warranty Kyocera warrants its LCD’s for a period of 12 months from the ship date. Kyocera shall, by mutual agreement, replace or re-work defective LCD’s that are shown to be Kyocera’s responsibility. M303011 Spec No. TQ3C-8EAF0-E1YAA211-00 Part No. Page TCG070WVLQAPNN-AN04 14 12. Precautions for use 12-1. Installation of the LCD 1) A transparent protection plate shall be added to protect the LCD and its polarizer. 2) The LCD shall be installed so that there is no pressure on the LSI chips. 3) Since this product is wide viewing product, occurrence level of in-plane unevenness by the external stress is different compared to current normal viewing product. So there is a possibility that in-plane unevenness will be occurred by over twist, strain giving by attaching to LCD, and over pressure to touch panel. Please be careful of stress when designing the housing. 4) A transparent protection sheet is attached to the polarizer. Please remove the protection film slowly before use, paying attention to static electricity. 12-2. Static electricity 1) Since CMOS ICs are mounted directly onto the LCD glass, protection from static electricity is required. 2) Workers should use body grounding. Operator should wear ground straps. 12-3. LCD operation 1) The LCD shall be operated within the limits specified. Operation at values outside of these limits may shorten life, and/or harm display images. 12-4. Storage 1) The LCD shall be stored within the temperature and humidity limits specified. Store in a dark area, and protect the LCD from direct sunlight or fluorescent light. 2) Always store the LCD so that it is free from external pressure onto it. 12-5. Usage 1) DO NOT store in a high humidity environment for extended periods. Polarizer degradation bubbles, and/or peeling off of the polarizer may result. 2) The front polarizer is easily scratched or damaged. Prevent touching it with any hard material, and from being pushed or rubbed. 3) The LCD screen may be cleaned by wiping the screen surface with a soft cloth or cotton pad using a little Ethanol. 4) Water may cause damage or discoloration of the polarizer. Clean condensation or moisture from any source immediately. 5) Always keep the LCD free from condensation during testing. Condensation may permanently spot or stain the polarizer. 6) Do not disassemble LCD because it will result in damage. 7) This Kyocera LCD has been specifically designed for use in general electronic devices, but not for use in a special environment such as usage in an active gas. Hence, when the LCD is supposed to be used in a special environment, evaluate the LCD thoroughly beforehand and do not expose the LCD to chemicals such as an active gas. 8) Please do not use solid-base image pattern for long hours because a temporary afterimage may appear. We recommend using screen saver etc. in cases where a solid-base image pattern must be used. 9) Liquid crystal may leak when the LCD is broken. Be careful not to let the fluid go into your eyes and mouth. In the case the fluid touches your body; rinse it off right away with water and soap. M303011 Spec No. Part No. TQ3C-8EAF0-E1YAA211-00 Page TCG070WVLQAPNN-AN04 13. Reliability test data Test item Test condition Test time High temp. atmosphere 80°C 240h Low temp. atmosphere -30°C 240h High temp. humidity atmosphere 40°C 90% RH 240h Temp. cycle -30°C 0.5h R.T. 0.5h 80°C 0.5h 10cycles High temp. operation 70°C 500h 1) 2) 3) 4) Judgement Display function Display quality Current consumption Display function Display quality Current consumption Display function Display quality Current consumption Display function Display quality Current consumption Display function Display quality Current consumption : No defect : No defect : No defect : No defect : No defect : No defect : No defect : No defect : No defect : No defect : No defect : No defect : No defect : No defect : No defect Each test item uses a test LCD only once. The tested LCD is not used in any other tests. The LCD is tested in circumstances in which there is no condensation. The reliability test is not an out-going inspection. The result of the reliability test is for your reference purpose only. The reliability test is conducted only to examine the LCD's capability. M303011 15 002-110930-0 参考(for Reference) IRISO 製 9681 シリーズコネクタの取り扱い上の注意 Precautions when using IRISO.9681 series connector 作業の際は、手袋及びアースバンドを着用して下さい。 Please wear gloves and a ground belt when the time of the work. ロック解除時、カバー片端（左 or 右）のみに力を加えてロック解除を 行わないで下さい。変形・破損する事があります。 In case of releasing the lock, please don’t make a force on the one edge of cover. It can be deformed and damaged. 手袋及びアースバンドを着用のこと Wear gloves and a ground belt. 手袋及びアースバンドを着用のこと Wear gloves and a ground belt. Spec No. Date TQ3C-8EAF0-E2YAA211-00 August 3, 2016 KYOCERA INSPECTION STANDARD TYPE : TCG070WVLQAPNN-AN04 KYOCERA DISPLAY CORPORATION Original Issue Date Designed by : Engineering dept. Prepared Checked Approved Confirmed by : QA dept. Checked Approved August 3, 2016                                         Spec No. Part No. TQ3C-8EAF0-E2YAA211-00 Date Rev.No. Date Revision record Designed by : Engineering dept. Prepared Checked Approved Page Page TCG070WVLQAPNN-AN04 Confirmed by : QA dept. Checked Approved Descriptions - Spec No. Part No. TQ3C-8EAF0-E2YAA211-00 Page TCG070WVLQAPNN-AN04 1 Visuals specification 1) Note Note General 1. Customer identified anomalies not defined within this inspection standard shall be reviewed by Kyocera, and an additional standard shall be determined by mutual consent. 2. This inspection standard about the image quality shall be applied to any defect within the effective active area and shall not be applicable to outside of the area. 3. Definition of Inspection conditions Luminance : 500 Lux min. Inspection distance : 300 mm. Temperature : 25 ± 5℃ Direction : Directly above Dot defect Bright dot defect The dot is constantly “on” when power applied to the inspection LCD, even when all “Black” data sent to the screen. item Inspection tool: 5% Transparency neutral density filter. Count dot: If the dot is visible through the filter. Don’t count dot: If the dot is not visible through the filter. Ｒ Ｇ Ｂ Ｒ Ｇ Ｂ Ｒ Ｇ Ｂ There is an electrode in the middle of the dot Ｒ Ｇ Ｂ Ｒ Ｇ Ｂ Ｒ Ｇ Ｂ and one dot is shown in the left drawing. Ｒ Ｇ Ｂ Ｒ Ｇ Ｂ Ｒ Ｇ Ｂ ＜dot drawing＞ Black dot defect The dot is constantly “off” when power applied to the LCD, even when all “White” data sent to the screen. Similar size compared to bright dot. White dot Pixel works electrically, however, circular/foreign (Circular/foreign particle makes dot appear to be “on” even when all particle) “Black” data is sent to the screen. Adjacent dot Adjacent dot defect is defined as two or more bright dot defects or black dot defects. Ｒ Ｇ Ｂ Ｒ Ｇ Ｂ Ｒ Ｇ Ｂ Ｒ Ｇ Ｂ Ｒ Ｇ Ｂ Ｒ Ｇ Ｂ Ｒ Ｇ Ｂ Ｒ Ｇ Ｂ Ｒ Ｇ Ｂ dot defect External Bubble, Scratch, Visible operating (all pixels “Black” or “White”) and non inspection Foreign particle operating. (Polarizer, Cell, Backlight) Others Appearance inspection Does not satisfy the value at the spec. CFL wires Damaged to the CFL wires, connector, pin, functional failure or appearance failure. Definition Definition of circle size of size ｄ＝(ａ＋ｂ)/2 Definition of linear size Spec No. Part No. TQ3C-8EAF0-E2YAA211-00 Page TCG070WVLQAPNN-AN04 2 2) Standard Classification Defect Dot (in LCD defect glass) Inspection item Bright dot defect :4 : 5 mm or more Acceptable number :5 Black dot spacing : 5 mm or more Acceptable number :2 Acceptable number :3 3 or more dots join Acceptable number :0 Total dot defects Acceptable number : 5 Max 2 dot join Bright dot defect Black dot defect White dot, Dark dot (Circle) External inspection Acceptable number Bright dot spacing Black dot defect Others Judgement standard Size (mm) 0.2 ＜ d ≦ 0.2 0.2 ＜ d ≦ 0.4 0.4 ＜ d ≦ 0.5 0.5 ＜ d ≦ 0.4 Acceptable number (Neglected) 5 3 0 Polarizer (Scratch) (Defect on Polarizer or Width (mm) 0.1 ＜ W ≦ 0.1 between Polarizer 0.1 ＜ W ≦ 0.3 and LCD glass) 0.3 ＜ W ≦ 0.3 Length (mm) － 2.0 ＜ L ≦ 5.0 5.0 ＜ L ≦ 5.0 － Acceptable number (Neglected) (Neglected) 0 0 Polarizer (Bubble) Size (mm) 0.2 ＜ d ≦ 0.2 0.2 ＜ d ≦ 0.3 0.3 ＜ d ≦ 0.5 0.5 ＜ d ≦ 0.4 Acceptable number (Neglected) 5 3 0 Size (mm) 0.2 ＜ d ≦ 0.2 0.2 ＜ d ≦ 0.4 0.4 ＜ d ≦ 0.5 0.5 ＜ d ≦0 .4 Acceptable number (Neglected) 5 3 0 Foreign particle （Circular shape） Foreign particle （Linear shape） Scratch Width (mm) 0.00 ＜ W ≦ 0.03 0.03 ＜ W ≦ 0.10 0.1 ＜ W ≦0.3 Length (mm) － 2.0 ＜ L ≦ 2.0 2.0 ＜ L ≦ 4.0 4.0 ＜ L ≦ 5.0 － Acceptable number (Neglected) (Neglected) 3 0 (According to circular shape)