TCG101WXLPAANN-AN20

 Spec No. Date SPEC TQ3C-8EAF0-E1YAQ08-00 November 29, 2013 TYPE : TCG101WXLPAANN-AN20 < 10.1 inch WXGA transmissive color TFT with LED backlight and constant current circuit for LED backlight> CONTENTS 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. Application Construction and outline Mechanical specifications Absolute maximum ratings Electrical characteristics Optical characteristics Interface signals Input timing characteristics Lot number identification Warranty Precautions for use Reliability test data Outline drawing KYOCERA DISPLAY CORPORATION This specification is subject to change without notice. Consult Kyocera before ordering.    Original Issue Date November 29, 2013 Designed by: Engineering dept. Prepared Checked Confirmed by: QA dept. Approved Checked Approved Spec No. TQ3C-8EAF0-E1YAQ08-00 Part No. Page TCG101WXLPAANN-AN20 Warning 1. This Kyocera LCD module has been specifically designed for use only in electronic devices and industrial machines in the area of audio control, office automation, industrial control, home appliances, etc. The module should not be used in applications where the highest level of safety and reliability are required and module failure or malfunction of such module results in physical harm or loss of life, as well as enormous damage or loss. Such fields of applications include, without limitation, medical, aerospace, communications infrastructure, atomic energy control. Kyocera expressly disclaims any and all liability resulting in any way to the use of the module in such applications. 2. Customer agrees to indemnify, defend and hold Kyocera harmless from and against any and all actions, claims, damages, liabilities, awards, costs, and expenses, including legal expenses, resulting from or arising out of Customer's use, or sale for use, or Kyocera modules in applications. Caution 1. Kyocera shall have the right, which Customer hereby acknowledges, to immediately scrap or destroy tooling for Kyocera modules for which no Purchase Orders have been received from the Customer in a two-year period. - Spec No. Part No. TQ3C-8EAF0-E1YAQ08-00 Revision record Designed by : Engineering dept. Date Rev.No. Prepared Date Page Checked Approved Page TCG101WXLPAANN-AN20 Confirmed by : QA dept. Checked Descriptions Approved - Spec No. Part No. TQ3C-8EAF0-E1YAQ08-00 Page TCG101WXLPAANN-AN20 1 1. Application This document defines the specification of TCG101WXLPAANN-AN20. (RoHS Compliant) 2. Construction and outline LCD Backlight system Polarizer Interface Additional circuit : Transmissive color dot matrix type TFT : LED : Anti-Glare treatment : LVDS : Timing controller, Power supply (3.3V input) : Constant current circuit for LED Backlight(12V input) 3. Mechanical specifications Item Specification Unit 236(W)×(156.8)(H)×9.4(D) mm Active area 216.96(W)×135.6(H) (25.6cm/10.1 inch(Diagonal)) mm Dot format 1280×(R,G,B)(W)×800(H) dot 0.0565(W)×0.1695(H) mm Normally White - 500 g Outline dimensions 1) Dot pitch Base color Mass 2) 1) Projection not included. Please refer to outline for details. 2) Due to the characteristics of the LCD material, the color varies with environmental temperature. M407011                                Spec No. Part No. TQ3C-8EAF0-E1YAQ08-00 Page 2 TCG101WXLPAANN-AN20 4. Absolute maximum ratings 4-1. Electrical absolute maximum ratings Item Symbol Min. Max. Unit Supply voltage(+3.3V) VDD -0.3 4.0 V Supply voltage(+12V) VIN -0.3 14.0 V VI1 -0.3 2.8 V VI2 -0.3 2.8 V VI3 -0.3 VDD+0.5 V VI4 -0.3 VIN V RxINi+, RxINi- (i=0,1,2,3) CK IN+, CK INInput signal Voltage   1) SELLVDS, BITSEL, SC BLBRT, BLEN 1) VDD must be supplied correctly within the range described in 5-1. 4-2. Environmental absolute maximum ratings Item Symbol Min. Max. Unit Operating temperature 1) TOP -20 70 °C Storage temperature 2) TSTO -30 80 °C Operating humidity 3) HOP 10 4) %RH Storage humidity 3) HSTO 10 4) %RH Vibration - 5) 5) - Shock - 6) 6) - 1) Operating temperature means a temperature which operation shall be guaranteed. Since display performance is evaluated at 25°C, another temperature range should be confirmed. 2) Temp. = -30°C㸺48h , Temp. = 80°C㸺168h    Store LCD at normal temperature/humidity. Keep them free from vibration and shock. An LCD that is kept at a low or a high temperature for a long time can be defective due to other conditions, even if the low or high temperature satisfies the standard.  (Please refer to “Precautions for Use” for details.) 3) Non-condensing 4) Temp.ӌ40°C, 90%RH Max.   Temp.㸼40°C, Absolute humidity shall be less than 90%RH at 40°C.  5)  Frequency 10㹼55 Hz Vibration width 0.15mm Interval Acceleration value (0.3㹼9 m/s2) 10-55-10 Hz  㸯minutes        2 hours in each direction X, Y, Z (6 hours total)        EIAJ ED-2531 6) Acceleration: 490 m/s2, Pulse width: 11 ms 3 times in each direction: ±X, ±Y, ±Z    EIAJ ED-2531 M407011                                Spec No. Part No. TQ3C-8EAF0-E1YAQ08-00 Page 3 TCG101WXLPAANN-AN20 5. Electrical characteristics 5-1. LCD              Item Temp. = -20㹼70°C     Symbol Condition Min. Typ. Max. Unit VDD - 3.0 3.3 3.6 V Current consumption IDD 2) - 350 460 mA Permissive input ripple voltage VRP VDD=3.3V - - 100 mVp-p VIL "Low" level 0 㸫 0.8 V VIH "High" level 2.0 㸫 VDD V IOL VI3=0V -10 - 10 ȣA IOH VI3=3.3V - - 400 ȣA VL - 0 - 1.9 V VID - 250 350 450 mV VTL "Low" level VCM-100 㸫 㸫 mV VTH "High" level 㸫 㸫 VCM+100 mV R1 - - 100 - Ȑ t1 - 0.1 - 10 ms t2 - 0 - - ms t3 - 0 - - ms t4 - 1.0 - - s t5 - 200 - - ms t6 - 200 - - ms t7 - 0 - 10 s t8 - 0 - - ms Supply voltage Input signal voltage 1) 3) Input reek current LVDS Input voltage 4) Differential input voltage Differential input threshold voltage 4) 5) Terminator VDD-turn-on conditions 1) 6) 1) VDD-turn-on conditions M407011                                Spec No. Part No. TQ3C-8EAF0-E1YAQ08-00 TCG101WXLPAANN-AN20 2) Display pattern: VDD = 3.3V, Temp. = 25°C 1 2 3࣭࣭࣭࣭࣭࣭࣭࣭࣭࣭࣭࣭࣭࣭࣭࣭3838 3839 3840(dot)  1 ‫ڦڦڦڦڦڦڦڦڦڦڦڦڦڦڦڦڦڦڦڦڦڦ‬ 2 ‫ڦڦڦڦڦڦڦڦڦڦڦڦڦڦڦڦڦڦڦڦڦڦ‬ 3 ‫ڦڦڦڦڦڦڦڦڦڦڦڦڦڦڦڦڦڦڦڦڦڦ‬ : ‫ڦڦڦڦڦڦڦڦڦڦڦڦڦڦڦڦڦڦڦڦڦڦ‬ : ‫ڦڦڦڦڦڦڦڦڦڦڦڦڦڦڦڦڦڦڦڦڦڦ‬ : ‫ڦڦڦڦڦڦڦڦڦڦڦڦڦڦڦڦڦڦڦڦڦڦ‬ 799 ‫ڦڦڦڦڦڦڦڦڦڦڦڦڦڦڦڦڦڦڦڦڦڦ‬ 800 ‫ڦڦڦڦڦڦڦڦڦڦڦڦڦڦڦڦڦڦڦڦڦڦ‬ (dot) 3) Input signal : SELLVDS, BITSEL, SC 4) Input signal : RxIN3+, RxIN3-, RxIN2+, RxIN2-, RxIN1+, RxIN1-, RxIN0+, RxIN0         CK IN+, CK IN- 㼂㻵㻰 㼂㻸 㼂㻯㻹 㻜㼂 5) VCM : LVDS Common mode voltage (VCM=1.25V) 6) Please power on LVDS transmitter at the same time as VDD, or LVDS transmitter should be powered on first. M407011                                Page 4 Spec No. Part No. TQ3C-8EAF0-E1YAQ08-00 Page 5 TCG101WXLPAANN-AN20 5-2. Constant current circuit for LED Backlight Temp. = -20㹼70°C Item Supply voltage 1)  Current consumption Permissive input ripple voltage BLBRT Input signal voltage BLBRT Input pull-down resistance BLEN Input signal voltage BLEN Input pull-down resistance 㹎㹕㹋 Frequency 3) 㹎㹕M Duty ratio  Operating life time 1)  3) Symbol Condition Min. Typ. Max. Unit VIN - 10.8 12.0 13.2 V IIN 2) - 275 360 mA VRP_BL VIN=12.0V - - 100 mVp-p VIL_BLBRT "Low" level 0 - 0.8 V VIH_BLBRT "High" level 2.3 - VIN V RIN_BLBRT - 100 300 500 kȐ VIL_BLEN "Low" level 0 - 0.8 V VIH_BLEN "High" level 2.3 - VIN V RIN_BLEN - 100 300 500 kȐ fPWM - 200 - 10k Hz fPWM=200Hz 1 - 100 % fPWM=2kHz 10 - 100 % fPWM=10kHz 50 - 100 % Temp.=25°C - 50,000 - h DPWM 4), 5) T VIN-turn-on conditions 㻜㻚㻥㼂㻵㻺 㼂㻵㻺 㻜㻚㻝㼂㻵㻺 㻜㼙㼟 㻔㼙㼕㼚㻕 㻮㻸㻱㻺 㻜㼙㼟 㻔㼙㼕㼚㻕 㻜㼙㼟 㻔㼙㼕㼚㻕 㻼㼃㻹 㼟㼕㼓㼚㼍㼘 㻜㼙㼟 㻔㼙㼕㼚㻕 㻮㻸㻮㻾㼀 㻌㻌㻌㻌㻌㻌㻌㻌㻭㼒㼠㼑㼞㻌㼟㼕㼓㼚㼍㼘㻌㼕㼟㻌㼕㼚㼜㼡㼠㻘㻌㼕㼠㻌㼣㼕㼘㼘㻌㼠㼍㼗㼑㻌㻞㻜㻜㼙㼟㻔㻹㼕㼚㻚㻕㻌㼠㼛㻌㼟㼠㼍㼎㼕㼘㼕㼦㼑㻌 㻌㻌㻌㻌㻌㻌㻌㻌㼜㼛㼣㼑㼞㻌㼛㼒㻌㼎㼍㼏㼗㼘㼕㼓㼔㼠㻚㻌 㻌㻌㻌㻌㻌㻌㻌㻌㻹㼑㼍㼚㼣㼔㼕㼘㼑㻘㻌㼠㼛㼚㻌㼛㼒㻌㻮㻸㻮㻾㼀㻌㼟㼔㼛㼡㼘㼐㻌㼎㼑㻌㼙㼛㼞㼑㻌㼠㼔㼍㼚㻌㻞㻜㻜䃛㼟㻚 㻞㻜㻜㼙㼟 㻔㼙㼕㼚㻕 㻻㻺 㻸㻱㻰 㻮㼍㼏㼗㼘㼕㼓㼔㼠 㻻㻲㻲 㻻㻲㻲   2) VIN = 12V, Temp. = 25Υ㸪DPWM = 100% M407011                                Spec No. TQ3C-8EAF0-E1YAQ08-00 Part No. Page TCG101WXLPAANN-AN20 3) 㹎㹕㹋 Timing Diagram     tON㸪tOFF Ӎ 50ȣs. In case of lower frequency, the deterioration of the display quality, flicker etc., may occur. 4) When brightness decrease 50% of minimum brightness. 㻌 㻌 㻌 The average life of a LED will decrease when the LCD is operating at higher temperatures. 5) Life time is estimated data.(Condition : IF=60mA, Ta=25Υ in chamber). M407011                                6 Spec No. Part No. TQ3C-8EAF0-E1YAQ08-00 Page 7 TCG101WXLPAANN-AN20 6. Optical characteristics Measuring spot =ȭ6.0mm, Temp. = 25°C                    Item Symbol Condition Min. Typ. Max. Unit Rise Ǖr ȟ=ȭ=0° 㸫 8 㸫 ms Down Ǖd ȟ=ȭ=0° 㸫 22 㸫 ms ȟUPPER 㸫 80 㸫 ȟLOWER 㸫 80 㸫 㸫 80 㸫 㸫 80 㸫 Response time Viewing angle range View direction   :6 o’clock (Gray inversion) CRӍ10 ȭLEFT 䃥RIGHT Contrast ratio Brightness ȟ=ȭ=0° 500 800 㸫 - L IF=60mA/Line 350 500 㸫 cd/m2 0.535 0.585 0.635 0.300 0.350 0.400 0.270 0.320 0.370 0.530 0.580 0.630 0.110 0.160 0.210 0.075 0.125 0.175 0.235 0.285 0.335 0.260 0.310 0.360 y x Green y Chromaticity coordinates x Blue y x White y ȟ=ȭ=0° ȟ=ȭ=0° ȟ=ȭ=0° ȟ=ȭ=0° 6-1. Definition of contrast ratio CR(Contrast ratio) 㸻 Brightness with all pixels "White" Brightness with all pixels "Black" 6-2. Definition of response time :KLWH %ODFN     %ULJKWQHVV :KLWH ȫU deg. CR x Red deg. ȫG M407011                                - Spec No. Part No. TQ3C-8EAF0-E1YAQ08-00 Page 8 TCG101WXLPAANN-AN20 6-3. Definition of viewing angle                     ȭ r ȟ833(5 \ ȟ r \ ȟ/2:(5 ȭ/()7 [ [ ȭ5,*+7 [ [ \ ȟGLUHFWLRQ \ ȭGLUHFWLRQ 6-4. Brightness measuring points 1) Rating is defined as the white brightness at center of display screen(3). 2) 5 minutes after LED is turned on. (Ambient Temp.=25Υ) M407011                                Spec No. TQ3C-8EAF0-E1YAQ08-00 Part No. TCG101WXLPAANN-AN20 Page 9 7. Interface signals 7-1. Interface signals No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 Symbol SC BITSEL RxIN3+ RxIN3GND CK IN+ CK INGND RxIN2+ RxIN2GND RxIN1+ RxIN1GND RxIN0+ RxIN0GND SELLVDS VDD VDD   LCD connector   Matching connector                                Description Scan direction control㸦GND or Open㸸NormalࠊHigh㸸Reverse㸧 Bit data select signal(Low: 8bit modeࠊHigh: 6bit mode) LVDS receiver signal CH3(+) LVDS receiver signal CH3(-) GND LVDS receiver signal CK(+) LVDS receiver signal CK(-) GND LVDS receiver signal CH2(+) LVDS receiver signal CH2(-) GND LVDS receiver signal CH1(+) LVDS receiver signal CH1(-) GND LVDS receiver signal CH0(+) LVDS receiver signal CH0(-) GND Mode select signal(LVDS Data mapping) +3.3V power supply +3.3V power supply 㸸 DF19G -20P-1H(54) (HIROSE) 㸸 DF19-20S-1C (HIROSE) 㸸 DF19G-20S-1C (HIROSE)   LVDS receiver 㸸 Embedded in ASIC Matching LVDS transmitter 㸸 THC63LVDM83R(THine Electronics) or compatible 1) Scanning SC : GND or Open SC : High M407011                                Note 1) LVDS LVDS LVDS LVDS LVDS LVDS LVDS LVDS LVDS LVDS Spec No. Part No. TQ3C-8EAF0-E1YAQ08-00 Page TCG101WXLPAANN-AN20 7-2. LED No. 1 2 3 4 5 6 7 8 Symbol GND BLBRT BLEN GND VIN VIN VIN GND LCD connector   Matching connector Description  GND PWM signal(Brightness adjustment) ON/OFF terminal voltage  GND  +12V power supply  +12V power supply  +12V power supply  GND 㸸 SM08B-SHLS-G-TF(LF)(SN) 㸦JST㸧 㸸 SHLP-08V-S-B      㸦JST㸧 M407011                                Note 10 Spec No. Part No. TQ3C-8EAF0-E1YAQ08-00 TCG101WXLPAANN-AN20 7-3. Data mapping (6bit input / 8bit mode)  1) Location of BITSEL, SELLVDS (THC63LVDM83R(THine Electronics) or compatible) Transmitter 2Pin BITSEL = "L" or OPEN 2Pin BITSEL = "L" or OPEN 18Pin SELLVDS = "L" or OPEN 18Pin SELLVDS = "H" Pin No. Data 㸫 R0(LSB) 51 TA0 TA1 㸫 R1 52 TA2 㸫 R2 54 TA3 㸫 R3 55 TA4 㸫 R4 56 TA5 㸫 3 R5(MSB) TA6 㸫 G0(LSB) 4 㸫 G1 6 TB0 TB1 㸫 G2 7 TB2 㸫 G3 11 TB3 㸫 G4 12 TB4 㸫 14 G5(MSB) TB5 㸫 B0(LSB) 15 TB6 㸫 B1 19 㸫 B2 20 TC0 TC1 㸫 B3 22 TC2 㸫 B4 23 TC3 㸫 24 B5(MSB) TC4 㸫 (HS) 27 TC5 㸫 (VS) 28 TC6 㸫 DE 30 㸫 GND 50 TD0 TD1 㸫 GND 2 TD2 GND 㸫 8 TD3 GND 㸫 10 TD4 GND 㸫 16 TD5 GND 㸫 18 TD6 㸫 25 GND   BITSEL=L(GND) or OPEN SELLVDS=H(3.3V) 1 CYCLE     R1 G0 R5 R4 R3 R2 R1 R0 G0 G1 B1 B0 G5 G4 G3 G2 G1 B1 B2 DE (VS) (HS) B5 B4 B3 B2 DE   DE㸸DATA ENABLE  HS㸸HSYNC  VS㸸VSYNC M407011                                Page 11 Spec No. Part No. TQ3C-8EAF0-E1YAQ08-00 TCG101WXLPAANN-AN20 Page 12  2) Block Diagram BITSEL=L(GND) or OPEN   SELLVDS=H(3.3V) 㻯㼛㼚㼠㼞㼛㼘㼘 㼀㻴㻯㻢㻟㻸㼂㻰㻹㻤㻟㻾 㻯㼛㼚㼠㼞㼛㼘㼘㻌㻵㻯䠄㻮㼡㼕㼘㼠㻙㼕㼚㻌㻸㼂㻰㻿䠅 㻣 㻾㼤㻵㻺㻜㻗 㼀㻭㻜㻙㻢 㻾㻜㻙㻾㻡䠈㻳㻜 㻾㻭㻜㻙㻢 㻾㼤㻵㻺㻜㻙 㻣 㼀㻯㻜㻙㻢 㻮㻞㻙㻮㻡 㻔㻴㻿㻕䠈㻔㼂㻿㻕䠈㻰㻱 㻣 㼀㻰㻜㻙㻢 㻳㻺㻰 㻾㼤㻵㻺㻝㻗 㻾㼤㻵㻺㻝㻙 㻾㼤㻵㻺㻞㻗 㻾㼤㻵㻺㻞㻙 㻸㼂㻰㻿㻙㼀㻻㻙㻼㻭㻾㻭㻸㻸㻱㻸㻌㼀㼀㻸 㼀㻮㻜㻙㻢 㼀㼀㻸㻌㻼㻭㻾㻭㻸㻸㻱㻸㻙㼀㻻㻙㻸㼂㻰㻿 㻣 㻳㻝㻙㻳㻡䠈㻮㻜䠈㻮㻝 㻾㻮㻜㻙㻢 㻾㻯㻜㻙㻢 㻾㼤㻵㻺㻟㻗 㻾㻰㻜㻙㻢 㻾㼤㻵㻺㻟㻙 㻯㻷㻌㻵㻺㻗 㻯㻸㻷㻌㻵㻺 㻯㻷 㻼㻸㻸 㻯㻷㻌㻵㻺㻙 㻟㻚㻟㼂 㻯㻷㻌㻻㼁㼀 㻼㻸㻸 㻿㻱㻸㻸㼂㻰㻿 㻝㻜㻷䃈   When using ͆6-bit Transmitter͇, please connect the unused channel of the control IC receiver as described in the diagram below. 㻯㼛㼚㼠㼞㼛㼘㼘 㻢㼎㼕㼠㻙㼀㼞㼍㼚㼟㼙㼕㼠㼠㼑㼞 㻯㼛㼚㼠㼞㼛㼘㼘㻌㻵㻯䠄㻮㼡㼕㼘㼠㻙㼕㼚㻌㻸㼂㻰㻿䠅 㻣 㼀㻭㻜㻙㻢 㻾㻜㻙㻾㻡䠈㻳㻜 㻾㻭㻜㻙㻢 㻣 㼀㻯㻜㻙㻢 㻮㻞㻙㻮㻡 㻔㻴㻿㻕䠈㻔㼂㻿㻕䠈㻰㻱 㻣 㼀㻰㻜㻙㻢 㻾㼤㻵㻺㻝㻗 㻾㼤㻵㻺㻝㻙 㻾㼤㻵㻺㻞㻗 㻾㼤㻵㻺㻞㻙 㻸㼂㻰㻿㻙㼀㻻㻙㻼㻭㻾㻭㻸㻸㻱㻸㻌㼀㼀㻸 㼀㻮㻜㻙㻢 㻾㼤㻵㻺㻜㻙 㼀㼀㻸㻌㻼㻭㻾㻭㻸㻸㻱㻸㻙㼀㻻㻙㻸㼂㻰㻿 㻣 㻳㻝㻙㻳㻡䠈㻮㻜䠈㻮㻝 㻳㻺㻰 㻾㼤㻵㻺㻜㻗 㻾㻮㻜㻙㻢 㻾㻯㻜㻙㻢 㻾㼤㻵㻺㻟㻗 㻾㻰㻜㻙㻢 㻾㼤㻵㻺㻟㻙 㻯㻷㻌㻵㻺㻗 㻯㻷 㻯㻸㻷㻌㻵㻺 㻼㻸㻸 㻯㻷㻌㻵㻺㻙 㻼㻸㻸 㻯㻷㻌㻻㼁㼀 㻝㼗䃈 㻟㻚㻟㼂 㻟㻚㻟㼂 㻿㻱㻸㻸㼂㻰㻿 㻝㻜㻷䃈 M407011                                Spec No. Part No. TQ3C-8EAF0-E1YAQ08-00 TCG101WXLPAANN-AN20 7-4. Data mapping (8bit input / 8bit mode) 1) Location of BITSEL, SELLVDS (THC63LVDM83R(THine Electronics) or compatible) Transmitter 2Pin BITSEL = "L" or OPEN 2Pin BITSEL = "L" or OPEN 18Pin SELLVDS = "L" or OPEN 18Pin SELLVDS = "H" Pin No. Data R0(LSB) R2 51 TA0 TA1 R1 R3 52 TA2 R2 R4 54 TA3 R3 R5 55 TA4 R4 R6 56 TA5 R5 3 R7(MSB) TA6 G0(LSB) G2 4 G1 G3 6 TB0 TB1 G2 G4 7 TB2 G3 G5 11 TB3 G4 G6 12 TB4 G5 14 G7(MSB) TB5 B0(LSB) B2 15 TB6 B1 B3 19 B2 B4 20 TC0 TC1 B3 B5 22 TC2 B4 B6 23 TC3 B5 24 B7(MSB) TC4 (HS) (HS) 27 TC5 (VS) (VS) 28 TC6 DE DE 30 R6 R0(LSB) 50 TD0 TD1 R7(MSB) R1 2 TD2 G6 G0(LSB) 8 TD3 G7(MSB) G1 10 TD4 B6 B0(LSB) 16 TD5 B7(MSB) B1 18 TD6 (NA) 25 (NA) BITSEL=L(GND) or OPEN SELLVDS=L(GND) or OPEN 1 CYCLE R1 R0 G0 R5 R4 R3 R2 R1 R0 G0 G2 G1 B1 B0 G5 G4 G3 G2 G1 B1 B3 B2 DE (VS) (HS) B5 B4 B3 B2 DE 㻾㻣 㻾㻢 㻺㻭 㻮㻣 㻮㻢 㻳㻣 㻳㻢 㻾㻣 㻾㻢 㻺㻭    DE㸸DATA ENABLE   HS㸸HSYNC   VS㸸VSYNC M407011                                Page 13 Spec No. Part No. TQ3C-8EAF0-E1YAQ08-00 TCG101WXLPAANN-AN20 BITSEL=L(GND) or OPEN SELLVDS=H(3.3V) 1 CYCLE   R3 R2 G2 R7 R6 R5 R4 R3 R2 G2 G4 G3 B3 B2 G7 G6 G5 G4 G3 B3 B5 B4 DE (VS) (HS) B7 B6 B5 B4 DE 㻾㻝 㻾㻜 㻺㻭 㻮㻝 㻮㻜 㻳㻝 㻳㻜 㻾㻝 㻾㻜 㻺㻭 DE㸸DATA ENABLE   HS㸸HSYNC   VS㸸VSYNC  2) Block Diagram BITSEL=L(GND) or OPEN SELLVDS=L(GND) or OPEN 㻯㼛㼚㼠㼞㼛㼘㼘 㼀㻴㻯㻢㻟㻸㼂㻰㻹㻤㻟㻾 㻯㼛㼚㼠㼞㼛㼘㼘㻌㻵㻯䠄㻮㼡㼕㼘㼠㻙㼕㼚㻌㻸㼂㻰㻿䠅 㻣 㻾㼤㻵㻺㻜㻗 㼀㻭㻜㻙㻢 㻾㻜㻙㻾㻡䠈㻳㻜 㻾㻭㻜㻙㻢 㻾㼤㻵㻺㻜㻙 㻣 㼀㻯㻜㻙㻢 㻮㻞㻙㻮㻡 㻔㻴㻿㻕䠈㻔㼂㻿㻕䠈㻰㻱 㻣 㻾㻢㻘㻾㻣㻘㻳㻢㻘㻳㻣 㻮㻢㻘㻮㻣㻘㻺㻭 㼀㻰㻜㻙㻢 㻾㼤㻵㻺㻝㻗 㻾㼤㻵㻺㻝㻙 㻾㼤㻵㻺㻞㻗 㻾㼤㻵㻺㻞㻙 㻸㼂㻰㻿㻙㼀㻻㻙㻼㻭㻾㻭㻸㻸㻱㻸㻌㼀㼀㻸 㼀㻮㻜㻙㻢 㼀㼀㻸㻌㻼㻭㻾㻭㻸㻸㻱㻸㻙㼀㻻㻙㻸㼂㻰㻿 㻣 㻳㻝㻙㻳㻡䠈㻮㻜䠈㻮㻝 㻾㻮㻜㻙㻢 㻾㻯㻜㻙㻢 㻾㼤㻵㻺㻟㻗 㻾㻰㻜㻙㻢 㻾㼤㻵㻺㻟㻙 㻯㻷㻌㻵㻺㻗 㻯㻷 㻯㻸㻷㻌㻵㻺 㻼㻸㻸 㻯㻷㻌㻵㻺㻙 㻼㻸㻸 㻯㻷㻌㻻㼁㼀 㻿㻱㻸㻸㼂㻰㻿 㻝㻜㻷䃈   M407011                                Page 14 Spec No. Part No. TQ3C-8EAF0-E1YAQ08-00 TCG101WXLPAANN-AN20 BITSEL=L(GND) or OPEN SELLVDS=H(3.3V) 㻯㼛㼚㼠㼞㼛㼘㼘 㼀㻴㻯㻢㻟㻸㼂㻰㻹㻤㻟㻾 㻯㼛㼚㼠㼞㼛㼘㼘㻌㻵㻯䠄㻮㼡㼕㼘㼠㻙㼕㼚㻌㻸㼂㻰㻿䠅 㻣 㻾㼤㻵㻺㻜㻗 㼀㻭㻜㻙㻢 㻾㻞㻙㻾㻣䠈㻳㻞 㻾㻭㻜㻙㻢 㻾㼤㻵㻺㻜㻙 㻣 㼀㻯㻜㻙㻢 㻮㻠㻙㻮㻣 㻔㻴㻿㻕䠈㻔㼂㻿㻕䠈㻰㻱 㻣 㻾㻜䠈㻾㻝䠈㻳㻜䠈㻳㻝 㻮㻜䠈㻮㻝䠈㻺㻭 㼀㻰㻜㻙㻢 㻾㼤㻵㻺㻝㻗 㻾㼤㻵㻺㻝㻙 㻾㼤㻵㻺㻞㻗 㻾㼤㻵㻺㻞㻙 㻸㼂㻰㻿㻙㼀㻻㻙㻼㻭㻾㻭㻸㻸㻱㻸㻌㼀㼀㻸 㼀㻮㻜㻙㻢 㼀㼀㻸㻌㻼㻭㻾㻭㻸㻸㻱㻸㻙㼀㻻㻙㻸㼂㻰㻿 㻣 㻳㻟㻙㻳㻣䠈㻮㻞䠈㻮㻟 㻾㻮㻜㻙㻢 㻾㻯㻜㻙㻢 㻾㼤㻵㻺㻟㻗 㻾㻰㻜㻙㻢 㻾㼤㻵㻺㻟㻙 㻯㻷㻌㻵㻺㻗 㻯㻷 㻯㻸㻷㻌㻵㻺 㻼㻸㻸 㻯㻷㻌㻵㻺㻙 㻟㻚㻟㼂 㻼㻸㻸 㻯㻷㻌㻻㼁㼀 㻿㻱㻸㻸㼂㻰㻿 㻝㻜㻷䃈   M407011                                Page 15 Spec No. Part No. TQ3C-8EAF0-E1YAQ08-00 TCG101WXLPAANN-AN20 7-5. Data mapping (6bit input / 6bit mode)  1) Location of BITSEL, SELLVDS (THC63LVDM63R(THine Electronics) or compatible) Transmitter 2Pin BITSEL = "H" 2Pin BITSEL = "H" 18Pin SELLVDS = "L" or OPEN 18Pin SELLVDS = "H" Pin No. Data 㸫 R0(LSB) 44 TA0 TA1 㸫 R1 45 TA2 㸫 R2 47 TA3 㸫 R3 48 TA4 㸫 R4 1 TA5 㸫 3 R5(MSB) TA6 㸫 G0(LSB) 4 㸫 G1 6 TB0 TB1 㸫 G2 7 TB2 㸫 G3 9 TB3 㸫 G4 10 TB4 㸫 12 G5(MSB) TB5 㸫 B0(LSB) 13 TB6 㸫 B1 15 㸫 B2 16 TC0 TC1 㸫 B3 18 TC2 㸫 B4 19 TC3 㸫 20 B5(MSB) TC4 㸫 (HS) 22 TC5 㸫 (VS) 23 TC6 㸫 DE 25 BITSEL=H(3.3V) SELLVDS=L(GND) or OPEN 1 CYCLE R1 G0 R5 R4 R3 R2 R1 R0 G0 G1 B1 B0 G5 G4 G3 G2 G1 B1 B2 DE (VS) (HS) B5 B4 B3 B2 DE    DE㸸DATA ENABLE   HS㸸HSYNC   VS㸸VSYNC  M407011                                Page 16 Spec No. Part No. TQ3C-8EAF0-E1YAQ08-00 TCG101WXLPAANN-AN20 2) Block Diagram BITSEL=H(3.3V) SELLVDS=L(GND) or OPEN 㻯㼛㼚㼠㼞㼛㼘㼘 㻢㼎㼕㼠㻙㼀㼞㼍㼚㼟㼙㼕㼠㼠㼑㼞 㻯㼛㼚㼠㼞㼛㼘㼘㻌㻵㻯䠄㻮㼡㼕㼘㼠㻙㼕㼚㻌㻸㼂㻰㻿䠅 㻣 㼀㻮㻜㻙㻢 㻣 㼀㻯㻜㻙㻢 㻾㼤㻵㻺㻜㻙 㻾㼤㻵㻺㻝㻗 㻾㼤㻵㻺㻝㻙 㻾㼤㻵㻺㻞㻗 㻾㼤㻵㻺㻞㻙 㻸㼂㻰㻿㻙㼀㻻㻙㻼㻭㻾㻭㻸㻸㻱㻸㻌㼀㼀㻸 㻣 㼀㼀㻸㻌㻼㻭㻾㻭㻸㻸㻱㻸㻙㼀㻻㻙㻸㼂㻰㻿 㻾㻭㻜㻙㻢 㻳㻝㻙㻳㻡䠈㻮㻜䠈㻮㻝 㻮㻞㻙㻮㻡 㻔㻴㻿㻕䠈㻔㼂㻿㻕䠈㻰㻱 㻾㼤㻵㻺㻜㻗 㼀㻭㻜㻙㻢 㻾㻜㻙㻾㻡䠈㻳㻜 㻾㻮㻜㻙㻢 㻾㻯㻜㻙㻢 㻯㻷㻌㻵㻺㻗 㻯㻷 㻯㻸㻷㻌㻵㻺 㻼㻸㻸 㻯㻷㻌㻵㻺㻙 㻼㻸㻸 㻯㻷㻌㻻㼁㼀 㻿㻱㻸㻸㼂㻰㻿 㻝㻜㻷䃈 M407011                                Page 17 Spec No. Part No. TQ3C-8EAF0-E1YAQ08-00 Page 18 TCG101WXLPAANN-AN20 8. Input timing characteristics 8-1. Timing characteristics Item Clock (CK) Enable signal (DE) Refresh rate Frequency Symbol Min. Typ. Max. Unit 1/Tc 60 71.1 80 MHz 1300 1440 1800 Dot 16.25 20.25 - ȣs 1024 Line 70 㸫 Horizontal Period Th Horizontal display period Thd Vertical Period Tv Vertical display period Tvd fv Note 1) 1280 803 823 800 50 60 1) Please set a clock frequency, a vertical dormant period, and the horizontal dormant period so that the Horizontal Period should not reach less than Min. value. 2) If the refresh rate reach less than Min. value, the deterioration of the display quality, flicker etc., may occur.(fv=1/Tv) M407011                                2) Spec No. Part No. TQ3C-8EAF0-E1YAQ08-00 Page TCG101WXLPAANN-AN20 8-2. Input Data Signals and Display position on the screen   D1, DH1 D2, DH1 D3, DH1 D1, DH2 D2, DH2 D3, DH2 D1280, DH1 R D1, DH800 D2, DH800 G B D3, DH800 M407011                                19 Spec No. Part No. TQ3C-8EAF0-E1YAQ08-00 Page TCG101WXLPAANN-AN20 20 9. Lot number identification  The lot number shall be indicated on the back of the backlight case of each LCD. TCG101WXLPAANN-AN20                 - ŌŌ - ŌŌ - Ō ŅŅ 12   Ņ 3 MADE IN Ņ 4 ŌŌŌŌŌ Ņ 5 No1. - No5. above indicate 1. Year code 2. Month code 3. Date 4. Version Number 5. Country of origin (Japan or China)   Year 2013 2014 2015 2016 2017 2018 Code 3 4 5 6 7 8 Month Jan. Feb. Mar. Apr. May Jun. Code 1 2 3 4 5 6 Month Jul. Aug. Sep. Oct. Nov. Dec. Code 7 8 9 X Y Z 10. Warranty  10-1. Incoming inspection   Please inspect the LCD within one month after your receipt.   10-2. Production warranty   Kyocera warrants its LCD’s for a period of 12 months from the ship date. Kyocera shall, by mutual agreement, replace or re-work defective LCD’s that are shown to be Kyocera’s responsibility. M407011                                Spec No. TQ3C-8EAF0-E1YAQ08-00 Part No. Page TCG101WXLPAANN-AN20 21 11. Precautions for use 11-1. Installation of the LCD 1) Please ground in order to stabilize brightness and display quality. 2) A transparent protection plate shall be added to protect the LCD and its polarizer. 3) The LCD shall be installed so that there is no pressure on the LSI chips. 4) The LCD shall be installed flat, without twisting or bending. 5) A transparent protection sheet is attached to the polarizer. Please remove the protection film slowly before use, paying attention to static electricity. 11-2. Static electricity 1) Since CMOS ICs are mounted directly onto the LCD glass, protection from static electricity is required. 2) Workers should use body grounding. Operator should wear ground straps. 11-3. LCD operation 1) The LCD shall be operated within the limits specified. Operation at values outside of these limits may shorten life, and/or harm display images. 11-4. Storage 1) The LCD shall be stored within the temperature and humidity limits specified. Store in a dark area, and protect the LCD from direct sunlight or fluorescent light. 2) Always store the LCD so that it is free from external pressure onto it. 11-5. Usage 1) DO NOT store in a high humidity environment for extended periods. Polarizer degradation bubbles, and/or peeling off of the polarizer may result. 2) The front polarizer is easily scratched or damaged. Prevent touching it with any hard material, and from being pushed or rubbed. 3) The LCD screen may be cleaned by wiping the screen surface with a soft cloth or cotton pad using a little Ethanol. 4) Water may cause damage or discoloration of the polarizer. Clean condensation or moisture from any source immediately. 5) Always keep the LCD free from condensation during testing. Condensation may permanently spot or stain the polarizer. 6) Do not disassemble LCD because it will result in damage. 7) This Kyocera LCD has been specifically designed for use in general electronic devices, but not for use in a special environment such as usage in an active gas. Hence, when the LCD is supposed to be used in a special environment, evaluate the LCD thoroughly beforehand and do not expose the LCD to chemicals such as an active gas. 8) Please do not use solid-base image pattern for long hours because a temporary afterimage may appear. We recommend using screen saver etc. in cases where a solid-base image pattern must be used. 9) Liquid crystal may leak when the LCD is broken. Be careful not to let the fluid go into your eyes and mouth. In the case the fluid touches your body; rinse it off right away with water and soap. M407011                                Spec No. Part No. TQ3C-8EAF0-E1YAQ08-00 Page TCG101WXLPAANN-AN20 12. Reliability test data   Test item Test condition Test time High temp. atmosphere 80°C 240h Low temp. atmosphere -30°C 240h High temp. humidity atmosphere 40°C 90% RH 240h Temp. cycle -30°C 0.5h R.T. 0.5h 80°C 0.5h 10cycles High temp. operation 70°C 500h 1) 2) 3) 4)   Judgement Display function Display quality Current consumption Display function Display quality Current consumption Display function Display quality Current consumption Display function Display quality Current consumption Display function Display quality Current consumption : No defect : No defect : No defect : No defect : No defect : No defect : No defect : No defect : No defect : No defect : No defect : No defect : No defect : No defect : No defect Each test item uses a test LCD only once. The tested LCD is not used in any other tests. The LCD is tested in circumstances in which there is no condensation. The reliability test is not an out-going inspection. The result of the reliability test is for your reference purpose only. The reliability test is conducted only to examine the LCD's capability. M407011                                22 Spec No. Date TQ3C-8EAF0-E2YAQ08-00 November 29, 2013 KYOCERA INSPECTION STANDARD TYPE : TCG101WXLPAANN-AN20 KYOCERA DISPLAY CORPORATION Original Issue Date Designed by : Engineering dept. Prepared Checked Confirmed by : QA dept. Approved Checked Approved November 29, 2013                                         Spec No. Part No. TQ3C-8EAF0-E2YAQ08-00 Date Rev.No. Date Revision record Designed by : Engineering dept. Prepared Page Checked Approved Page TCG101WXLPAANN-AN20 Confirmed by : QA dept. Checked Descriptions Approved - Spec No.   Part No. TQ3C-8EAF0-E2YAQ08-00 Page TCG101WXLPAANN-AN20 1  Visuals specification 1) Note Note General 1. Customer identified anomalies not defined within this inspection standard shall be reviewed by Kyocera, and an additional standard shall be determined by mutual consent. 2. This inspection standard about the image quality shall be applied to any defect within the active area and shall not be applicable to outside of the area. 3. Definition of Inspection conditions Luminance : 500 Lux min. Inspection distance : 300 mm. Temperature : 25 s 5Υ Direction      : Directly above Dot defect Bright dot defect inspection item The dot is constantly “on” when power applied to the LCD, even when all “Black” data sent to the screen. Inspection tool: 5% Transparency neutral density filter. Count dot: If the dot is visible through the filter. Don’t count dot: If the dot is not visible through the filter. 䠮 䠣 䠞 䠮 䠣 䠞 䠮 䠣 䠞 䠮 䠣 䠞 䠮 䠣 䠞 䠮 䠣 䠞 dot defect 䠮 䠣 䠞 䠮 䠣 䠞 䠮 䠣 䠞 Black dot defect  The dot is constantly “off” when power applied to the LCD, even when all “White” data sent to the screen. Adjacent dot Adjacent dot defect is defined as two or more bright dot defects or black dot defects. 䠮 䠣 䠞 䠮 䠣 䠞 䠮 䠣 䠞 䠮 䠣 䠞 䠮 䠣 䠞 䠮 䠣 䠞 䠮 䠣 䠞 䠮 䠣 䠞 䠮 䠣 䠞 dot defect  External Bubble, Scratch, Visible operating (all pixels “Black” or “White”) and non inspection Foreign particle operating. (Polarizer, Cell, Backlight) Appearance Does not satisfy the value at the spec. inspection Definition Definition of circle size Definition of linear size of size 㹢㸻(㹟㸩㹠)/2   Spec No.   Part No. TQ3C-8EAF0-E2YAQ08-00 Page TCG101WXLPAANN-AN20 2  2) Standard Classification Defect Dot (in LCD defect glass) Inspection item Bright dot defect :4 : 5 mm or more Acceptable number :5 Black dot spacing : 5 mm or more Acceptable number :2 Acceptable number :3 3 or more dots join Acceptable number :0 Total dot defects Acceptable number : 5 Max 2 dot join Bright dot defect Black dot defect White dot, Dark dot (Circle) External inspection Acceptable number Bright dot spacing Black dot defect Others Judgement standard Size (mm) 0.2 㸺 d ӌ 0.2 0.2 㸺 d ӌ 0.4 0.4 㸺 d ӌ 0.5 0.5 㸺 d ӌ 0.4 Acceptable number (Neglected) 5 3 0 Polarizer (Scratch) (Defect on Polarizer or Width (mm) 0.1 㸺 W ӌ 0.1 between Polarizer 0.1 㸺 W ӌ 0.3 and LCD glass) 0.3 㸺 W ӌ 0.3 Length (mm) 㸫 2.0 㸺 L ӌ 5.0 5.0 㸺 L ӌ 5.0 㸫 Acceptable number 1HJOHFWHG 1HJOHFWHG 0 0 Polarizer (Bubble) Size (mm) 0.2 㸺 d ӌ 0.2 0.2 㸺 d ӌ 0.3 0.3 㸺 d ӌ 0.5 0.5 㸺 d ӌ 0.4 Acceptable number (Neglected) 5 3 0 Size (mm) 0.2 㸺 d ӌ 0.2 0.2 㸺 d ӌ 0.4 0.4 㸺 d ӌ 0.5 0.5 㸺 d ӌ0 .4 Acceptable number (Neglected) 5 3 0 Foreign particle 㸦Circular shape㸧 Foreign particle 㸦Linear shape㸧 Scratch Width (mm) 0.00 㸺 W ӌ 0.03 0.03 㸺 W ӌ 0.10 0.1 㸺 W ӌ0.3 Length (mm) 㸫 2.0 㸺 L ӌ 2.0 2.0 㸺 L ӌ 4.0 4.0 㸺 L ӌ 5.0 㸫 Acceptable number 1HJOHFWHG 1HJOHFWHG 3 0 (According to circular shape)