TCG104VGLACANN-AN00

Spec No. Date  SPEC TQ3C-8EAF0-E1YAG41-00 March 19, 2015 TYPE : TCG104VGLACANN-AN00 < 10.4 inch VGA transmissive color TFT with LED backlight> CONTENTS 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. Application Construction and outline Mechanical specifications Absolute maximum ratings Electrical characteristics Optical characteristics Interface signals Input timing characteristics Lot number identification Warranty Precautions for use Reliability test data Outline drawing Mar 24, 2015 KYOCERA DISPLAY CORPORATION    This specification is subject to change without notice. Consult Kyocera before ordering. Original Issue Date Designed by: Engineering dept. Prepared Checked Confirmed by: QA dept. Approved Checked March 19, 2015                                        Approved Spec No. TQ3C-8EAF0-E1YAG41-00 Part No. Page TCG104VGLACANN-AN00 Warning 1. This Kyocera LCD module has been specifically designed for use only in electronic devices and industrial machines in the area of audio control, office automation, industrial control, home appliances, etc. The module should not be used in applications where the highest level of safety and reliability are required and module failure or malfunction of such module results in physical harm or loss of life, as well as enormous damage or loss. Such fields of applications include, without limitation, medical, aerospace, communications infrastructure, atomic energy control. Kyocera expressly disclaims any and all liability resulting in any way to the use of the module in such applications. 2. Customer agrees to indemnify, defend and hold Kyocera harmless from and against any and all actions, claims, damages, liabilities, awards, costs, and expenses, including legal expenses, resulting from or arising out of Customer's use, or sale for use, or Kyocera modules in applications. Caution 1. Kyocera shall have the right, which Customer hereby acknowledges, to immediately scrap or destroy tooling for Kyocera modules for which no Purchase Orders have been received from the Customer in a two-year period. - Spec No. Part No. TQ3C-8EAF0-E1YAG41-00 Revision record Designed by : Engineering dept. Prepared Checked Approved Date Rev.No. Date Page TCG104VGLACANN-AN00 Confirmed by : QA dept. Checked Approved Descriptions Page - Spec No. Part No. TQ3C-8EAF0-E1YAG41-00 Page TCG104VGLACANN-AN00 1 1. Application This document defines the specification of TCG104VGLACANN-AN00. (RoHS Compliant) 2. Construction and outline LCD Backlight system Polarizer Additional circuit : Transmissive color dot matrix type TFT : LED : Anti-Glare treatment : Timing controller, Power supply (3.3V input) (with constant current circuit for LED Backlight) 3. Mechanical specifications Item Specification Unit 230(W)×180.2(H)×(10.5)(D) mm Active area 211.2(W)×158.4(H) (26.4cm/10.4 inch(Diagonal)) mm Dot format 640×(R,G,B)(W)×480(H) dot 0.11(W)×0.33(H) mm Normally White - 500 g Outline dimensions 1) Dot pitch Base color Mass 2) 1) Projection not included. Please refer to outline for details. 2) Due to the characteristics of the LCD material, the color varies with environmental temperature. M407011                                Spec No. Part No. TQ3C-8EAF0-E1YAG41-00 Page TCG104VGLACANN-AN00 2 4. Absolute maximum ratings 4-1. Electrical absolute maximum ratings Item Symbol Min. Max. Unit Supply voltage(+3.3V) VDD 0 4.0 V Supply voltage(+24V) VIN -0.3 26 V 1) VI1 -0.3 VDD+0.3 V 2) VI2 -0.3 VDD+0.3 V 3) VI3 -0.3 14 V Input signal voltage 1) SC 2) RxIN0-/+ࠊRxIN1-/+ࠊRxIN2-/+ࠊRxIN3-/+ࠊCK IN-/+ BLBRT, BLEN 4-2. Environmental absolute maximum ratings Item Symbol Min. Max. Unit Operating temperature 1) TOP -20 70 °C Storage temperature 2) TSTO -30 80 °C Operating humidity 3) HOP 10 4) %RH Storage humidity 3) HSTO 10 4) %RH Vibration - 5) 5) - Shock - 6) 6) - 1) Operating temperature means a temperature which operation shall be guaranteed. Since display performance is evaluated at 25°C, another temperature range should be confirmed. 2) Temp. = -30°C㸺48h , Temp. = 80°C㸺168h    Store LCD at normal temperature/humidity. Keep them free from vibration and shock. An LCD that is kept at a low or a high temperature for a long time can be defective due to other conditions, even if the low or high temperature satisfies the standard.  (Please refer to “Precautions for Use” for details.) 3) Non-condensing 4) Temp.ӌ40°C, 85%RH Max.   Temp.㸼40°C, Absolute humidity shall be less than 85%RH at 40°C.  5)  Frequency 10㹼55 Hz Vibration width 0.15mm Interval 10-55-10 Hz Acceleration value (0.3㹼9 m/s2)  㸯minutes        2 hours in each direction X, Y, Z (6 hours total)        EIAJ ED-2531 6) Acceleration: 490 m/s2, Pulse width: 11 ms 3 times in each direction: ±X, ±Y, ±Z    EIAJ ED-2531 M407011                                Spec No. Part No. TQ3C-8EAF0-E1YAG41-00 Page TCG104VGLACANN-AN00 3 5. Electrical characteristics 5-1. LCD              Item     Temp. = -20㹼70°C Symbol Condition Min. Typ. Max. Unit VDD - 3.0 3.3 3.6 V Current consumption IDD 2) - 170 220 mA Permissive input ripple voltage VRP VDD=3.3V - - 100 mVpp VIL "Low" level 0 - 0.2VDD V VIH "High" level 0.8VDD - VDD V IOL VI3=0V -10 - 10 ȣA IOH VI3=3.3V - - 350 ȣA |VID| - 100 - 600 mV VTL "Low" level -100 - - mV VTH "High" level - - 100 mV |VID|/2 1.2 2.4-|VID|/2 - 100 - Supply voltage 1) Input signal voltage 3) Input reek current 3) Differential input voltage 4) Differential input threshold voltage 4) LVDS Common mode voltage Terminator 4) VICM R1 - Ȑ 1) VDD-turn-on conditions VDD 3.0V 3.0V 0㸺t1ӌ20ms       0.3V       Signal    3)4)               0㸺t2ӌ50ms                                0㸺t3ӌ1s t1 t2 t3                       2) Display pattern: VDD = 3.3V, Temp. = 25°C ࣭࣭࣭࣭࣭࣭࣭࣭࣭࣭࣭࣭1918 1919 1920(dot) ‫ڦڦڦڦڦڦڦڦڦڦڦڦڦڦڦڦڦڦڦڦ‬ ‫ڦڦڦڦڦڦڦڦڦڦڦڦڦڦڦڦڦڦڦڦ‬ ‫ڦڦڦڦڦڦڦڦڦڦڦڦڦڦڦڦڦڦڦڦ‬ ‫ڦڦڦڦڦڦڦڦڦڦڦڦڦڦڦڦڦڦڦڦ‬ ‫ڦڦڦڦڦڦڦڦڦڦڦڦڦڦڦڦڦڦڦڦ‬ ‫ڦڦڦڦڦڦڦڦڦڦڦڦڦڦڦڦڦڦڦڦ‬ ‫ڦڦڦڦڦڦڦڦڦڦڦڦڦڦڦڦڦڦڦڦ‬ ‫ڦڦڦڦڦڦڦڦڦڦڦڦڦڦڦڦڦڦڦڦ‬ 1  2 3   1 2 3 : : : 479 480 (dot) 3) Input signal : SC M407011                                Spec No. Part No. TQ3C-8EAF0-E1YAG41-00 Page TCG104VGLACANN-AN00 4 4) Input signal : RxIN3+, RxIN3-, RxIN2+, RxIN2-, RxIN1+, RxIN1-, RxIN0+, RxIN0         CK IN+, CK IN- VP-VN=|VID|>VTH=”HIGH” VN VTL VTH VP |VID| VP-VN=|VID|