OIS-330660-X-TU

OSA Opto Light GmbH Köpenicker Str. 325 / Haus 201 12555 Berlin - Germany Tel. +49 (0)30 65 76 26 83 Fax: +49 (0)30 65 76 26 81 E-Mail: contact@osa-opto.com preliminary Series 330 - 1206 with Lens IR high intensity 660-850 nm Features with lens, mounting from backside of PCB view angle 40° size 1206: 3,2(L) x 1,6(W) x 1,9(H) mm circuit substrate: glass laminated epoxy devices are ROHS conform lead free solderable, soldering pads: gold plated taped in 8 mm blister tape, cathode to transporting perforation - all devices sorted into luminous intensity classes - taping: face-up (TU) or face-down (TD) possible - high radiation intensity types Absolute Maximum Ratings IF, max[mA] 30 IF,P [mA] tp ≤ 100 µs τ=1: 10 150 VR [V] 5 IR, max [µA] 100 Thermal resistance R thJA [K / W] 450 TOp [°C] -40...85 TSt °[C] -55...85 30 20 10 Maximal forward current (DC) characteristic IF [mA] 0 -40 -20 0 20 40 60 80 Top[° C] Electro-Optical Characteristics Type OIS-330 660 OIS-330 670 OIS-330 690 OIS-330 700 OIS-330 724 OIS-330 740 OIS-330 770 OIS-330 810 OIS-330 850 Marking at anode anode anode anode anode anode anode anode anode Measurement Switching time (rise & fall) IF [mA] typ [ns] max [ns] 30 40 160 30 40 160 30 40 160 30 40 160 30 40 160 30 40 160 30 40 160 30 35 160 30 35 160 VF[V] typ max 1,9 2,2 1,9 2,2 1,9 2,2 1,9 2,2 1,8 2,2 1,7 2,0 1,7 2,0 1,6 2,0 1,6 2,0 λp [nm] 660 ±8 670 ±8 690 ±8 700 ±8 724 ±8 740 ±8 770 ±8 810 ±8 850 ±8 Ie[mW/sr] min typ 1.8 3.5 1.8 3.5 1.8 3.9 1.8 3.9 3.2 6.3 3.2 6.0 3.2 6.0 3.5 7.0 3.5 7.0 © 2005 OSA Opto Light GmbH — Tel. +49-(0)30-65 76 26 83 — Fax +49-(0)30-65 76 26 81 — contact@osa-opto.com preliminary edition 10/05 90 1,0 120 60 150 0,5 30 view angle 0,0 180 0 © 2005 OSA Opto Light GmbH — Tel. +49-(0)30-65 76 26 83 — Fax +49-(0)30-65 76 26 81 — contact@osa-opto.com preliminary edition 10/05 Outline Drawing Recommended Soldering Patterns Pad TU Pad TD Soldering Conditions 300 250 10-20 s T m p era ture (° ) e C 230° C 200 150 Max. 40 s 100 IR reflow soldering profile 50 0 50 100 150 200 250 300 T ime (sec) IR reflow soldering profile for lead free soldering Manual soldering: max power of iron 25W/ 3s/ 300° C © 2005 OSA Opto Light GmbH — Tel. +49-(0)30-65 76 26 83 — Fax +49-(0)30-65 76 26 81 — contact@osa-opto.com preliminary edition 10/05 Ordering Code For Parts Series Color Encapsulation Packaging OIS-330 - ??????? - X - ? TU - taped up TD - taped down X - uncolored clear Type definition, e.g. OIS-330 660-X -TU LED Luminous Intensity Groups And Subgroups [ mW/sr ] (general information – not this device specific) C: D: E: F: G: H: J: K: L: M: N: P: 0.28 0.45 0.71 1.12 1.80 2.80 4.50 7.10 11.20 18 28 45 0.45 0.71 1.12 1.80 2.80 4.50 7.10 11.20 18.00 28 45 71 C1: C2: D1: D2: E1: E2: F1: F2: G1: G2: H1: H2: 0.28 0.36 0.45 0.56 0.71 0.90 1.12 1.40 1.80 2.24 2.80 3.55 0.36 0.45 0.56 0.71 0.90 1.12 1.40 1.80 2.24 2.80 3.55 4.50 J1: J2: K1: K2: L1: L2: M1: M2: N1: N2: P1: P2: 4.50 5.60 7.10 9.00 11.20 14.00 18.00 22.40 28.00 35.50 45.00 56.00 5.60 7.10 9.00 11.20 14.00 18.00 22.40 28.00 35.50 45.00 56.00 71.00 Measured according to CIE 127. All SMD-LEDs are 100% measured and selected on full automated equipment with an accuracy of ± 11 %. © 2005 OSA Opto Light GmbH — Tel. +49-(0)30-65 76 26 83 — Fax +49-(0)30-65 76 26 81 — contact@osa-opto.com preliminary edition 10/05 Tape And Reel Packing D 180 mm 330 mm Parts/reel 2000 8000 Packing: The reel is sealed in special plastic bag with integrate ESD protection ( MIL - STD 81705 ) including a silica dry-pack Label Order No. Type Intensity group Charge No. Quantity XXXXXXXXX OIS-330 ?????-??-T ZZ 1122-AAAAAA 9999 Customer order No. 11 Week – 22 year – A internal identification Attention please: The information describes the type of component and shall not considered as assured characteristics. Terms of delivery and rights to change reserved. Due to technical requirements components may contain dangerous substances. The data sheet may changed without prior information; the valid issue will be on our webpage in internet. Packaging: Please use the recycling operators known to you. Components used in life support devices or systems and safety systems must be expressly authorized for such purpose! © 2005 OSA Opto Light GmbH — Tel. +49-(0)30-65 76 26 83 — Fax +49-(0)30-65 76 26 81 — contact@osa-opto.com