OLS-250SUD-C-T

OSA Opto Light GmbH Köpenicker Str. 325 / Haus 201 12555 Berlin - Germany Tel. +49 (0)30 65 76 26 83 Fax: +49 (0)30 65 76 26 81 E-Mail: contact@osa-opto.com Series 250 - 1206 lower height High luminous intensity Features size 1206: 3,2(L) x 1,6(W) x 0,9(H) mm circuit substrate: glass laminated epoxy devices are ROHS conform lead free solderable, soldering pads: gold plated taped in 8 mm blister tape, cathode to transporting perforation all devices sorted into luminous intensity classes taping: face-up (T) or face-down (TD) possible high luminous intensity types on request sorted in color classes Absolute Maximum Ratings IF, max[mA] 30 IF,P [mA] tp ≤ 100 µs τ=1: 10 100 VR [V] 5 IR, max [µA] 100 Thermal resistance R thJA [K / W] 450 TOp [°C] -40...105 TSt °[C] -55...105 30 20 Decoloration of epoxy and PCB possible in area of 85...105 ° C 10 Maximal forward current (DC) characteristic IF [mA] 0 -40 -20 0 20 40 60 80 100 Top[° C] Electro-Optical Characteristics Type OLS-250 HY OLS-250 SUD OLS-250 HD OLS-250 HSD OLS-250 HR Emitting color hyper yellow super orange hyper orange hyper TSN red hyper red Marking at cathode cathode cathode cathode cathode Measurement IF [mA] 20 20 20 20 20 typ 2,0 2,0 2,0 2,1 2,0 VF[V] max 2,6 2,6 2,6 2,6 2,6 λ d / λ p* [nm] 590 605 615 625 632 IV[mcd] min typ 60 150 60 130 60 150 60 120 40 85 © 2006 OSA Opto Light GmbH — Tel. +49-(0)30-65 76 26 83 — Fax +49-(0)30-65 76 26 81 — contact@osa-opto.com edition 10/06 90 1,0 120 60 150 0,5 30 view angle 0,0 180 0 10 HD SUD HR HY HSD IF (mA) UF – IF characteristic 1 1,6 1,7 1,8 1,9 2,0 2,1 2,2 2,3 2,4 UF (V) 5 4 Iv rel (at 10 mA ) 3 HSD HY HR SUD HD 2 IF – Iv, rel characteristic 1 0 10 20 30 40 50 IF (mA) © 2006 OSA Opto Light GmbH — Tel. +49-(0)30-65 76 26 83 — Fax +49-(0)30-65 76 26 81 — contact@osa-opto.com edition 10/06 Outline Drawing Recommended Soldering Patterns Soldering Conditions 300 250 10-20 s T m p era ture (° ) e C 230° C 200 150 Max. 40 s 100 IR reflow soldering profile 50 0 50 100 150 200 250 300 T ime (sec) IR reflow soldering profile for lead free soldering Manual soldering: max power of iron 25W/ 3s/ 300° C © 2006 OSA Opto Light GmbH — Tel. +49-(0)30-65 76 26 83 — Fax +49-(0)30-65 76 26 81 — contact@osa-opto.com edition 10/06 Ordering Code For Parts Series Color Encapsulation Packaging OLS-250 - ??????? - ? - ? T - taped up TD - taped down C - colored (standard) possible for red, green, blue XD - uncolored diffused CD - colored diffused possible for red, green, blue X - uncolored clear Type definition, e.g. OLS-250 HY-XD -T LED Luminous Intensity Groups And Subgroups [ mcd ] (general information – not this device specific) C: D: E: F: G: H: J: K: L: M: N: P: Q: R: S: T: U: V: W: X: Y: Z: 0.28 0.45 0.71 1.12 1.80 2.80 4.50 7.10 11.20 18 28 45 71 112 180 280 450 710 1120 1800 2800 4500 0.45 0.71 1.12 1.80 2.80 4.50 7.10 11.20 18.00 28 45 71 112 180 280 450 710 1120 1800 2800 4500 7100 C1: C2: D1: D2: E1: E2: F1: F2: G1: G2: H1: H2: J1: J2: K1: K2: L1: L2: M1: M2: N1: N2: P1: P2: 0.28 0.36 0.45 0.56 0.71 0.90 1.12 1.40 1.80 2.24 2.80 3.55 4.50 5.60 7.10 9.00 11.20 14.00 18.00 22.40 28.00 35.50 45.00 56.00 0.36 0.45 0.56 0.71 0.90 1.12 1.40 1.80 2.24 2.80 3.55 4.50 5.60 7.10 9.00 11.20 14.00 18.00 22.40 28.00 35.50 45.00 56.00 71.00 Q1: Q2: R1: R2: S1: S2: T1: T2: U1: U2: V1: V2: W 1: W 2: X1: X2: Y1: Y2: Z1: Z2: 71 90 112 140 180 224 280 355 450 560 710 900 1120 1420 1800 2250 2800 3550 4500 5750 90 112 140 180 224 280 355 450 560 710 900 1120 1420 1800 2250 2800 3550 4500 5750 7100 Measured according to CIE 127. All SMD-LEDs are 100% measured and selected on full automated equipment with an accuracy of ± 11 %. Special service: Brightness selection in sub selections possible. Color selection in 3 sub selections possible (each subgroup per reel). © 2006 OSA Opto Light GmbH — Tel. +49-(0)30-65 76 26 83 — Fax +49-(0)30-65 76 26 81 — contact@osa-opto.com edition 10/06 Tape And Reel Packing D 180 mm 330 mm Parts/reel 3000 12000 Packing: The reel is sealed in special plastic bag with integrate ESD protection ( MIL - STD 81705 ) including a silica dry-pack Label Order No. Type Intensity group Charge No. Quantity XXXXXXXXX OLS-250 ?????-??-T ZZ Color class: CC Customer order No. Color class - optional 11 Week – 22 year – A internal identification 1122-AAAAAA 9999 Attention please: The information describes the type of component and shall not considered as assured characteristics. Terms of delivery and rights to change reserved. Due to technical requirements components may contain dangerous substances. The data sheet may changed without prior information; the valid issue will be on our webpage in internet. Packaging: Please use the recycling operators known to you. Components used in life support devices or systems and safety systems must be expressly authorized for such purpose! © 2006 OSA Opto Light GmbH — Tel. +49-(0)30-65 76 26 83 — Fax +49-(0)30-65 76 26 81 — contact@osa-opto.com