OLS-330EG525-X-TD

OSA Opto Light GmbH Köpenicker Str. 325 / Haus 201 12555 Berlin - Germany Tel. +49 (0)30 65 76 26 83 Fax: +49 (0)30 65 76 26 81 E-Mail: contact@osa-opto.com preliminary Series 330 - 1206 with Lens thin film technology Features with lens, mounting from backside of PCB view angle 40° size 1206: 3,2(L) x 1,6(W) x 1,9(H) mm circuit substrate: glass laminated epoxy devices are ROHS conform lead free solderable, soldering pads: gold plated taped in 8 mm blister tape, cathode to transporting perforation all devices sorted into luminous intensity classes taping: face-up (TU) or face-down (TD) possible InGaN Chip type high luminous intensity types on request sorted in color classes Absolute Maximum Ratings IF, max[mA] 20 IF,P [mA] tp ≤ 100 µs τ=1: 10 100 VR [V] 5 IR, max [µA] 100 Thermal resistance R thJA [K / W] 450 TOp [°C] -40...85 TSt °[C] -40...100 20 15 10 5 Maximal forward current (DC) characteristic IF [mA] 0 -40 -20 0 20 40 60 80 Top[° C] electrostatic discharge classification (MIL-STD-883E) class 1 Electro-Optical Characteristics Type OLS-330 EB460 OLS-330 EG525 Emitting color blue green Marking at anode anode Measurement IF [mA] 20 20 typ 3,2 3,2 VF[V] max 3,8 3,8 λ d / λ p* [nm] 460 525 IV[mcd] min typ 250 400 1100 1600 © 2008 OSA Opto Light GmbH — Tel. +49-(0)30-65 76 26 83 — Fax +49-(0)30-65 76 26 81 — contact@osa-opto.com preliminary edition 03/08 90 1,0 120 60 150 0,5 30 view angle 0,0 180 0 10 IF (mA) EG525 EB460 UF – IF characteristic 1 2,5 2,6 2,7 2,8 2,9 3,0 3,1 3,2 3,3 3,4 3,5 UF (V) 2 Iv rel (at 20 mA ) EB460 EG525 1 IF – Iv, rel characteristic 0 10 20 30 IF (mA) © 2008 OSA Opto Light GmbH — Tel. +49-(0)30-65 76 26 83 — Fax +49-(0)30-65 76 26 81 — contact@osa-opto.com preliminary edition 03/08 Outline Drawing Recommended Soldering Patterns Pad TU Pad TD Soldering Conditions 300 250 10-20 s Temperature (°C) 230°C 200 150 Max. 40 s 100 IR reflow soldering profile 50 0 50 100 150 200 250 300 Time (sec) IR reflow soldering profile for lead free soldering Manual soldering: max power of iron 25W/ 3s/ 300° C © 2008 OSA Opto Light GmbH — Tel. +49-(0)30-65 76 26 83 — Fax +49-(0)30-65 76 26 81 — contact@osa-opto.com preliminary edition 03/08 Ordering Code For Parts Series Color Encapsulation Packaging OLS-330 - ??????? - X - ? TU - taped up TD - taped down X - uncolored clear Type definition, e.g. OLS-330 EB460-X -TU LED Luminous Intensity Groups And Subgroups [ mcd ] (general information – not this device specific) C: D: E: F: G: H: J: K: L: M: N: P: Q: R: S: T: U: V: W: X: Y: Z: 0.28 0.45 0.71 1.12 1.80 2.80 4.50 7.10 11.20 18 28 45 71 112 180 280 450 710 1120 1800 2800 4500 0.45 0.71 1.12 1.80 2.80 4.50 7.10 11.20 18.00 28 45 71 112 180 280 450 710 1120 1800 2800 4500 7100 C1: C2: D1: D2: E1: E2: F1: F2: G1: G2: H1: H2: J1: J2: K1: K2: L1: L2: M1: M2: N1: N2: P1: P2: 0.28 0.36 0.45 0.56 0.71 0.90 1.12 1.40 1.80 2.24 2.80 3.55 4.50 5.60 7.10 9.00 11.20 14.00 18.00 22.40 28.00 35.50 45.00 56.00 0.36 0.45 0.56 0.71 0.90 1.12 1.40 1.80 2.24 2.80 3.55 4.50 5.60 7.10 9.00 11.20 14.00 18.00 22.40 28.00 35.50 45.00 56.00 71.00 Q1: Q2: R1: R2: S1: S2: T1: T2: U1: U2: V1: V2: W 1: W 2: X1: X2: Y1: Y2: Z1: Z2: 71 90 112 140 180 224 280 355 450 560 710 900 1120 1420 1800 2250 2800 3550 4500 5750 90 112 140 180 224 280 355 450 560 710 900 1120 1420 1800 2250 2800 3550 4500 5750 7100 Measured according to CIE 127. All SMD-LEDs are 100% measured and selected on full automated equipment with an accuracy of ± 11 %. Special service: Brightness selection in sub selections possible. Color selection in sub selections possible (each subgroup per reel). Attention please: The LED output is strong enough to injure human eyes. Precautions must be taken to prevent locking directly at the LED with unaided eyes for more than a few seconds. Flashing lights have been known to cause discomfort in people, you can prevent this by taking precautions during use. Also, people should be cautions when using equipment where these LED´s are incorporated. © 2008 OSA Opto Light GmbH — Tel. +49-(0)30-65 76 26 83 — Fax +49-(0)30-65 76 26 81 — contact@osa-opto.com preliminary edition 03/08 Tape And Reel Packing D 180 mm 330 mm Parts/reel 2000 8000 Packing: The reel is sealed in special plastic bag with integrate ESD protection ( MIL - STD 81705 ) including a silica dry-pack Label Order No. Type Intensity group Charge No. Quantity XXXXXXXXX OLS-330 ?????-??-T ZZ Color class: CC Customer order No. Color class - optional 11 Week – 22 year – A internal identification 1122-AAAAAA 9999 Attention please: The information describes the type of component and shall not considered as assured characteristics. Terms of delivery and rights to change reserved. Due to technical requirements components may contain dangerous substances. The data sheet may changed without prior information; the valid issue will be on our webpage in internet. Packaging: Please use the recycling operators known to you. Components used in life support devices or systems and safety systems must be expressly authorized for such purpose! © 2008 OSA Opto Light GmbH — Tel. +49-(0)30-65 76 26 83 — Fax +49-(0)30-65 76 26 81 — contact@osa-opto.com