282-12.0M-SR-50GW

Oscilent Corporation | 282 Page 1 of 3 SMD Quartz Crystal Series Number Package Description Last Modified 282 . FEATURES - Seam welded metal lid / ceramic package - 1.7mm max. low profile - Tight stability / High reliability - Wide frequency range - Tape and Reel 7X5 SMD 2 Pad Jan. 01 2002 .. OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS PARAMETERS Frequency Range Frequency Tolerance Frequency Stability Operating Temperature Storage Temperature Shunt Capacitance Load Capacitance Drive Level Aging Insulation Resistance fO @ 25ºC Ta = 0 +70ºC TOPR TSTG CO CL (Customer Specified) 9.80 ~ 100.00 MHz. @ 25ºC @ 100 VDC CHARACTERISTICS 9.80 ~ 100.00 ±30, ±15*, ±25, ±50 ±50, ±25, ±30*, ±100 -0 ~ +70 (Std.) / Extended Options Avail. -40 ~ +85 5.0 max. 20 (Std.) Series Resonance and others Avail. 0.5 max. ±5 500 min. UNITS MHz PPM PPM ºC ºC pF pF µW PPM/Y Mohms *±15ppm Tolerance with ±30ppm Stability available in AT Cut Only .. EQUIVALENT SERIES RESISTANCE / MODE OF OSCILLATION FREQUENCY RANGE (MHz) 9.800 ~ 15.999 16.000 ~ 42.000 MODE Fundamental Fundamental MAX ESR Ohm 60 40 FREQUENCY RANGE (MHz) 16.000 ~ 34.999 35.000 ~ 100.000 MODE 3rd O/T 5th O/T MAX ESR Ohm 60 60 .. Oscilent Corporation | 282 Page 2 of 3 . PART NUMBER GUIDE Series Number Frequency Load Capacitance Tolerance @ +25oC Tolerance Over Temp ( oC ) Operating Temp ( oC ) Packaging** 282 Oscilent 7 x5 SMD 2 Pad - 12.0M See table below for standard freq. and enter here e.g. 12.048M for 12.048 MHz OR enter any desire frequency. - SR Enter desired capacitance here. See table below for standard load capacitance e.g. 20 for 20pF or Enter SR for Series. - 50 Blank * = 15 = 25 = 50 = ±30 PPM ±15 PPM ±25 PPM ±50 PPM Blank* E= G= N= N = ±50 PPM ±25 PPM ±30 PPM ±100 PPM U= S= W= U 0~+70 -20~+70 -40~+85 - TR Blank* = Bulk TR = Tape/Reel NOTE: Deviations on all parameters available. Please consult Oscilent for details. DEFINITIONS: Click on the characteristic names above for definitions of that particular characteristic. *STANDARDS: "Blank" part number selections indicate standard variables for that particular characteristic. **PACKAGING: Click on the packaging name above for tape/reel specifications . STANDARD FREQUENCIES / LOAD CAPACITANCE - FOR GUIDE ONLY / OTHER FREQ/LOADS AVAILABLE FREQUENCY (MHz) 9.8304 10.000 11.0592 12.000 14.31818 16.000 18.432 19.6608 20.000 24.000(F) 24.00014 (F) 30.000 (F) 30.000 (OT) 32.000 (F) LOAD (pF) Series Std. Std. Std. Std. Std. Std. Std. Std. Std. Std. Std. Std. Std. Std. 12 --------13 --------16 --------17 --------18 20 Std. Std. Std. Std. Std. 30 --------- Oscilent Corporation | 282 Page 3 of 3 32.000 (OT) 33.000 (OT) 33.8688 (F) 35.2512(OT) 36.000 (F) 36.000 (OT) 40.000 (F) 40.00 (OT) 40.32 (F) 40.32 (OT) FREQUENCY (MHz) Std. Std. Std. Std. Std. Std. Std. Std. Std. Series 12 13 16 LOAD (pF) 17 18 20 30 F = Fundamental | OT = 3RD OT NOTE: Other frequencies and load capacitance available. Please consult Oscilent for part numbers. Series No.: 282 Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map