290-12.0M-SR-05GP

Oscilent Corporation | 290 Page 1 of 3 SMD Quartz Crystal Series Number Package Description Last Modified 290 . FEATURES - Seam welded metal lid / ceramic package - 1.2mm max. low profile - Tight stability / High reliability - Wide frequency range - Tape and Reel 6 X 3.5 SMD Quartz Crystal Jun. 25 2003 . OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS PARAMETERS Frequency Range Frequency Tolerance Frequency Stability Operating Temperature Storage Temperature Shunt Capacitance Load Capacitance Equivalent Series Resistance Mode of Oscillation Drive Level fO @ 25ºC Ta = -10 +70ºC TOPR TSTG CO CL (Customer Specified) 10.00 ~ 40.00 MHz 10.00 ~ 40.00 MHz 10.00 ~ 40.00 MHz CHARACTERISTICS 10.00 ~ 40.00 ±10 ~ ±50 ±10 ~ ±100 -10 ~ +60 (-40 ~ +85 optional)* -40 ~ +85 7.0 max. 16, 20, 30, Series 50 max. Fundamental 0.01 ~ 1000 UNITS MHz PPM PPM ºC ºC pF pF Ohm µW * Consult Oscilent for available variations of temperature and stability . PART NUMBER GUIDE Series Number Frequency Load Capacitance Tolerance @ +25oC Tolerance Over Temp ( oC ) Operating Temp ( oC ) Packaging** 290 Oscilent 6 x 3.5 SMD - 12.0M See table below for standard freq. and enter here - SR - 05 G Blank* = ±50 PPM G= ±30 PPM P= R= R 0~+50 -10~+60 - TR Blank* = Bulk TR = Tape/Reel Enter desired Blank * = ±30 PPM capacitance here. or Fill in E.G See table below Oscilent Corporation | 290 Page 2 of 3 e.g. 12.0M for 12.000 MHz OR enter any desire frequency. for standard load 05 = ±5 PPM capacitance e.g. - 25 = ±25 PPM 20 for 20pF or Avail. = ±5 ~ ±100 Enter SR for Series. J= H= L= N= ±25 PPM ±20 PPM ±10 PPM ±100 PPM S= T= W= -20~+70 -30~+80 -40~+85 NOTE: Deviations on all parameters available. Please consult Oscilent for details. DEFINITIONS: Click on the characteristic names above for definitions of that particular characteristic. *STANDARDS: "Blank" part number selections indicate standard variables for that particular characteristic. **PACKAGING: Click on the packaging name above for tape/reel specifications . STANDARD FREQUENCIES / LOAD CAPACITANCE - FOR GUIDE ONLY / OTHER FREQ/LOADS AVAILABLE FREQUENCY (MHz) 12.000 14.31818 16.000 18.432 19.6608 20.000 24.000(F) 24.00014 (F) 30.000 (F) 30.000 (OT) 32.000 (F) 32.000 (OT) 33.000 (OT) 33.8688 (F) 35.2512(OT) 36.000 (F) 36.000 (OT) 40.000 (F) 40.00 (OT) 40.32 (F) 40.32 (OT) FREQUENCY (MHz) LOAD (pF) Series Std. Std. Std. Std. Std. Std. Std. Std. Std. Std. Std. Std. Std. Std. Std. Std. Std. Std. Std. Std. Series 12 12 13 13 16 16 LOAD (pF) 17 17 18 18 20 Std. Std. Std. 20 30 30 F = Fundamental | OT = 3RD OT NOTE: Other frequencies and load capacitance available. Please consult Oscilent for part numbers. Series No.: 290 Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator Oscilent Corporation | 290 Page 3 of 3 Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map