320-4.0M-5FN-TTS

Oscilent Corporation | 320 Series Crystal Oscillator Page 1 of 3 Crystal Oscillator Series Number Package Description Last Modified 320 FEATURES - HCMOS/TTL logic compatible - Wide frequency range - Low power consumption - Industry standard package - 5V or 3.3V optional - RoHs / Lead Free compliant Metal Dip Half Size Clock Oscillators July 01 2005 OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS PARAMETERS Output Logic Input Voltage (VDD) Frequency Range (fO) Operating Temperature (TOPR) Storage Temperature (TSTG) Overall Frequency Stability CONDITIONS a+b+c+d (a) Frequency Tolerance (b) Temperature Stability (c) Input Voltage Stability (d) Load Stability Input Current (IDD) Aging Rise Time (TR) / Fall Time (TF) Rise Time (TR) / Fall Time (TF) Output Voltage High "1" VOH Output Voltage Low "0" VOL Duty Cycle Start-Up Time (TS) Jitter @ 25°C < 66.660 MHz 66.660 MHz TTL Load HCMOS Load TTL Load HCMOS Load (One Sigma) 2.7 min. 0.4 max. 0.5 max. 50 ±10 (Std.) / 50 ±5 (Option) 10 max. ±25 max. CHARACTERISTICS HCMOS / TTL Output 3.3 ±10% 0.50 ~ 125.000 5.0 ±10% 0.50 ~ 125.000 UNITS VDC MHz °C °C PPM mA PPM/Y nS nS VDC VDC % ms ps 0 ~ +70 (Std.) / -40 ~ 85 (Option) -55 ~ +125 ±20, ±25, ±50, ±100 max. Inclusive of Overall Stability Inclusive of Overall Stability (Operating Temperature) Inclusive of Overall Stability (VDD ±5%) Inclusive of Overall Stability (RL ±5%) 10 ~ 45 max. ±5 max. 10 max. (0.4V to 2.4V w/ TTL, Waveform / HCMOS) 4 max. (0.4V to 2.4V w/ TTL, Waveform / HCMOS) 2.4 min. VDD-0.5 min. 15 ~ 85 max. PIN CONNECTIONS #1 No Connection or Tri-State Oscilent Corporation | 320 Series Crystal Oscillator Page 2 of 3 Enable High #4 Case Ground #5 Output #8 Vdd PART NUMBER GUIDE Series Number Frequency Voltage Supply Option Frequency Tolerance & Stability (max.) Operating Temp. (°C) Duty Cycle Pin 1 Connection Gullwing 320 Oscilent Clock Oscillators - 4.0 M -3 D= E= F= G= E ±100 PPM ±50 PPM ±25 PPM ±20 PPM N Blank* = 0~+70 N = -40~+85 -T Blank*= 50±10% T = 50±5% TS NC = No Connnection TS = Tri-State Enable High G Blank* = Std. G = Gullwing Enter your desired 5 = 5VDC frequency e.g. 3 = 3.3VDC 12.0M = 12.000MHz See table below for standard frequencies. NOTE: - Deviations on all parameters available. Please consult Oscilent for details. DEFINITIONS: - Click on the characteristic names above for definitions of that particular characteristic. *STANDARDS: - "Blank" part number selections indicate standard variables for that particular characteristic. PACKAGING: - Standard tube packaging, add -TR for Tape/Reel. Click here for tape/reel specifications STANDARD OSCILLATOR FREQUENCIES - GUIDE ONLY / OTHER FREQUENCIES AVAILABLE FREQUENCY (1.000 - 9.8304MHz) 1.000 1.2288 1.8432 2.000 2.4576 3.579545 3.6864 4.000 4.9152 5.000 FREQUENCY (10.00 - 24.000MHz) 10.00 11.0592 12.000 12.288 12.800 14.31818 14.7456 15.9744 16.000 16.257 FREQUENCY (24.576 - 80.000MHz) 24.576 25.000 25.175 28.322 30.000 32.000 32.514 33.000 35.000 40.000 Oscilent Corporation | 320 Series Crystal Oscillator Page 3 of 3 5.0688 6.000 6.144 7.3728 8.000 9.216 9.8304 16.384 17.734475 18.000 18.432 19.6608 20.000 24.000 48.000 50.000 64.000 65.000 66.666 80.000 - NOTE: Other frequencies available. PLEASE SPECIFY IN PART NUMBER GUIDE Series No.: 320 Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map