392-28.0M-3DN-TNC

Oscilent Corporation | 392 Series Crystal Oscillator Page 1 of 2 Crystal Oscillator Series Number Package Description Last Modified 392 FEATURES 14 Pin Dip 6 Leads PECL Output July 01 2005 - Wave form symmetry as low as 45/55% - PECL output - Industry standard 14 pin Dip - 3.3V or 5V optional - RoHs / Lead Free compliant OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS PARAMETERS Output Logic Input Voltage (VDD) Frequency Range (fO) Operating Temperature (TOPR) Storage Temperature (TSTG) Overall Frequency Stability CONDITIONS (a) Frequency Tolerance (b) Temperature Stability (c) Input Voltage Stability (d) Load Stability Input Current (IDD) Aging Rise Time (TR) Fall Time (TF) Output Voltage High "1" VOH Output Voltage Low "0" VOL Load Duty Cycle Start-Up Time (TS) Jitter @ 25°C 20% to 80% of Waveform 20% to 80% of Waveform PECL PECL 50% of Waveform RMS CHARACTERISTICS Positive ECL Square Wave (PECL) 3.3 ±10% 5.0 ±10% UNITS VDC MHz °C °C PPM mA PPM/Y nS nS VDC VDC Ohms % mS ps 19.440 ~ 180.0 (Fund, Third, Fifth / UM-1) 0 ~ +70 (Std.) / -40 ~ 85 (Option) -55 ~ +125 ±20 (0 ~ +70°C Only), ±25, ±50, ±100 max. Inclusive of Overall Stability Inclusive of Overall Stability (Operating Temperature) Inclusive of Overall Stability (VDD ±5%) Inclusive of Overall Stability (RL ±5%) 80 max. ±1 max. 2 max. 2 max. VDD - 1.025 min. VDD - 1.620 max. 50 50 ±10 (Std.) / 50 ±5 (Option) 10 max. 3.5 max. 120 max. PIN CONNECTIONS #1 #3 #7 #8 No Connection Tri-State Enable Low Ground Output Oscilent Corporation | 392 Series Crystal Oscillator Page 2 of 2 #12 Complimentary Output #14 Vdd PART NUMBER GUIDE Series Number Frequency Voltage Supply Option Frequency Tolerance & Stability (max.) Operating Temp. (° C) Duty Cycle Pin 1 Connection 392 Oscilent SMD Oscillators - 28.0 M Enter your freq. e.g. 28.0M = 28.00 MHz -5 5 = 5VDC 3 = 3.3VDC D= E= F= G= D ±100 PPM ±50 PPM ±25 PPM ±20 PPM N Blank* = 0~+70 N = -40~+85 -T Blank*= 50±10% T = -50±5% NC NC = No Connection NOTE: - Deviations on all parameters available. Please consult Oscilent for details. DEFINITIONS: - Click on the characteristic names above, for definitions of the particular characteristic. *STANDARDS: - "Blank" part number selections, indicate standard variables for the particular characteristic. PACKAGING: - Add -TR for Tape/Reel. Click here for tape/reel specifications Series No.: 392 Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map