480-8.0M-3EN-TTS

Oscilent Corporation | 480 Series Surface Mount Crystal Oscillator Page 1 of 3 SMD Oscillators Series Number Package Description Last Modified 480 FEATURES - Programmable Plastic Programmable HCMOS / TTL Output Jan. 01 2007 - Extended temperature range capabilities - Tape and Reel - Tri-State enable / disable - 5V or 3.3V optional - RoHs / Lead Free compliant OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS PARAMETERS Output Logic Input Voltage (VDD) Frequency Range (fO) Operating Temperature (TOPR) Storage Temperature (TSTG) Frequency Stability CONDITIONS a+b+c+d (a) Frequency Tolerance (b) Temperature Stability (c) Input Voltage Stability (d) Load Stability Input Current (IDD) Aging Rise Time (TR) Fall Time (TF) Output Voltage High "1" VOH Output Voltage Low "0" VOL Duty Cycle Start-Up Time (TS) Jitter @ 25°C TTL Load HCMOS Load TTL Load HCMOS Load (One Sigma) 2.7 min. 0.4 max. 0.5 max. 50 ±10 (Std.) / 50 ±5 (Option) 10 max. ±50 max. CHARACTERISTICS HCMOS / TTL Output 3.3 ±10% 1.000 ~ 125.000 5.0 ±10% 1.000 ~ 160.000 UNITS VDC MHz °C °C PPM mA PPM/Y nS nS VDC VDC % mS ps 0 ~ +70 (Std.) / -40 ~ 85 (Option) -55 ~ +125 ±50, ±100 max. Inclusive of Overall Stability Inclusive of Overall Stability (Operating Temperature) Inclusive of Overall Stability (VDD ±10%) Inclusive of Overall Stability (RL ±5%) 28 max. ±5 max. 4 max. (0.4V to 2.4V w/ TTL, 20% ~ 80%/ HCMOS) 4 max. (0.4V to 2.4V w/ TTL, 20% ~ 80%/ HCMOS) 2.4 min. VDD-0.5 min. 45 max. Oscilent Corporation | 480 Series Surface Mount Crystal Oscillator Page 2 of 3 PIN CONNECTIONS #1 Tri-State Enable High #2 Case Ground #3 Output #4 Vdd PART NUMBER GUIDE Series Number Frequency Voltage Supply Option Frequency Tolerance & Stability (max.) Operating Temp. (° C) Duty Cycle Pin 1 Connection 480 Oscilent SMD Oscillators - 8.0 M Enter your freq. e.g. 8.0M = 8.00 MHz See table below for standard freq. -3 5 = 5VDC 3 = 3.3VDC D= E= E ±100 PPM ±50 PPM N Blank* = 0~+70 N = -40~+85 -T Blank*= 50±10% T = -50±5% TS TS = Tri-State Enable High NOTE: - Deviations on all parameters available. Please consult Oscilent for details. DEFINITIONS: - Click on the characteristic names above, for definitions of the particular characteristic. *STANDARDS: - "Blank" part number selections, indicate standard variables for the particular characteristic. PACKAGING: - Add -TR for Tape/Reel. Click here for tape/reel specifications PART NUMBER CODING - STANDARD OSCILLATOR FREQUENCIES FREQUENCY (1.8432 - 16.000MHz) 1.8432 2.000 2.4576 3.579545 3.6864 4.000 4.9152 FREQUENCY (16.257 - 80.00MHz) 16.257 16.384 17.734475 18.000 18.432 19.6608 20.000 Oscilent Corporation | 480 Series Surface Mount Crystal Oscillator Page 3 of 3 5.000 5.0688 6.000 6.144 7.3728 8.000 9.216 9.8304 10.000 11.0592 12.000 12.288 12.800 14.31818 14.7456 15.9744 16.000 24.000 24.576 25.000 25.175 28.322 30.000 32.000 32.514 33.000 35.000 40.000 48.000 50.000 64.000 65.000 66.666 80.000 NOTE: Other frequencies available. Please consult Oscilent for part numbers Oscilent Corporation - CALL 949.252.0522 18195 East McDurmott Street . Building D . Irvine . CA 92614 . USA Fax: 949.252.0599 . E-Mail: Sales@Oscilent.com Series No.: 480 Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map