503-4.0M-340A

Oscilent Corporation | 501 - 504 Series TCXO - Temperature Compensated Crystal Oscill... Page 1 of 2 TXCO Series Number Package Description Last Modified 501 ~ 504 5 Leads DIP HCMOS / TTL / Clipped Sine Jan. 01 2007 FEATURES - High stable output over wide temperature range - Industry standard 5 Lead - RoHs / Lead Free compliant OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS PARAMETERS Output Frequency Range CONDITIONS fo Load Output Level Low Vs. Temp Range Frequency Stability Vs. Input Voltage (5%) Vs. Load Vs. Aging (@+25°C) Input Frequency Adjustment Rise Time / Fall Time Duty Cycle Storage Temperature Voltage Control Range Voltage Current (TSTG) 10 max. 50 ±10% max. -40 ~ +85 2.5 VDC ±2.0 Positive Transfer Characteristic 20 max. / 40 max. ±3.0 min. High 501 TTL 502 HCMOS 1.20 ~ 100.00 10TTL Load or 15pF HCMOS Load Max. 2.4 VDC min. 0.4 VDC max. VDD -0.5 VDC min. 0.5 VDC max. See Table 1 ±0.5 max. ±0.3 max. ±1.0 per year +5.0 ±5% / +3.3 ±5% 3 max. PPM PPM PPM VDC mA PPM nS °C 503 Clipped Sine 9.60 ~ 35.00 10K ohm // 10pF 504 Compatible* 1.20 ~ 100.0 UNITS MHz - 1.0 Vp-p min. - - *Compatible (504 Series) meets TTL and HCMOS mode simultaneously TABLE 1 - FREQUENCY STABILITY - TEMPERATURE TOLERANCE P/N Code A B C D E F G Temperature Range 0 ~ +50°C -10 ~ +60°C -10 ~ +70°C -20 ~ +70°C -30 ~ +60°C -30 ~ +70°C -30 ~ +75°C Frequency Stability (PPM) 1.5 x x O O 2.0 x x x x O O 2.5 x x x x x x x 3.0 x x x x x x x 3.5 x x x x x x x 4.0 x x x x x x x 4.5 x x x x x x x 5.0 x x x x x x x x O available all Frequency avail up to 25MHz only Oscilent Corporation | 501 - 504 Series TCXO - Temperature Compensated Crystal Oscill... Page 2 of 2 H -40 ~ +80°C - - - - x x x x *Other Temperature and Frequency Stabilities may be available. Check with Oscilent for details. PIN CONNECTIONS #1 #2 #3 #4 #5 VCC OUTPUT V.C. or GND GND GND PART NUMBER GUIDE Series Number Frequency Voltage Supply Option Frequency Stability (max.) Operating Temp. (°C) Frequency Deviation 502 Oscilent 501 = TTL 502 = HCMOS 503 = Clipped Sine Wave 504 = Compatible - 4.0 M Enter your desired frequency e.g. 12.0M = 12.000MHz -3 5 = 5VDC 3 = 3.3VDC 15 = 20 = 25 = 30 = 35 = 40 = 45 = 50 = 45 ±1.5 PPM ±2.0 PPM ±2.5 PPM ±3.0 PPM ±3.5 PPM ±4.0 PPM ±4.5 PPM ±5.0 PPM A= B= C= D= E= F= G= H= D 0 ~ +50 -10 ~ +60 -10 ~ +70 -20 ~ +70 -30 ~ +60 -30 ~ +70 -30 ~ +75 -40 ~ +80 -5 NC = No Connection (TCXO) 05 = ±5 PPM min. 10 = ±10 PPM min. NOTE: - Deviations on all parameters available. Please consult Oscilent for details. DEFINITIONS: - Click on the characteristic names above for definitions of that particular characteristic. *STANDARDS: - "Blank" part number selections indicate standard variables for that particular characteristic. PACKAGING: - Add -TR for Tape/Reel. Click here for tape/reel specifications Series No.: 501 to 504 Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map