554-12.0M-3DN-TP220

Oscilent Corporation | 554 Series VCXO - Voltage Control Crystal Oscillator Page 1 of 2 VCXO Series Number Package Description Last Modified 554 FEATURES - Wide voltage control range - Wave form symmetry of 40/60% - HCMOS or TTL output 14 Pin DIP UM-1 HCMOS / TTL Jan. 01 2007 - Industry standard DIP 14 pin lead spacing - RoHs / Lead Free compliant OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS PARAMETERS Output Logic Input Voltage (VDD) Frequency Range (fO) Operating Temperature (TOPR) Storage Temperature (TSTG) Overall Frequency Stability CONDITIONS a+b+c+d (a) Frequency Tolerance (b) Temperature Stability (c) Input Voltage Stability (d) Load Stability Input Current (IDD) Aging Rise Time (TR) / Fall Time (TF) Pin 1 Control Voltage Range Output Voltage High "1" VOH Output Voltage Low "0" VOL Duty Cycle Start-Up Time (TS) Jitter Linearity @ 25°C TTL Load HCMOS Load TTL Load HCMOS Load (One Sigma) 2.7 min. 0.4 max. 0.5 max. 50 ±10 (Std.) / 50 ±5 (Option) 10 max. ±25 max. (< 52MHz); ±50 max (> 52MHz) ±20 (Std.) / ±10 , ±5 (Option) CHARACTERISTICS HCMOS / TTL Output 3.3 ±10% 1.5440 ~ 155.520 0 ~ +70 (Std.) / -40 ~ 85 (Option) -55 ~ +125 ±10, ±20, ±25, ±50, ±100 max. Inclusive of Overall Stability Inclusive of Overall Stability (Operating Temperature) Inclusive of Overall Stability (VDD ±5%) Inclusive of Overall Stability (RL ±5%) 10 ~ 30 max. ±1 max. 8 max. (0.4V to 2.4V / TTL; 20% to 80% / HCMOS) 1.65 ±1.35 2.4 min. VDD-0.5 min. 2.5 ±2 15 ~ 50 max. 5.0 ±10% UNITS VDC MHz °C °C PPM mA PPM/Y nS V VDC VDC % ms ps % PIN CONNECTIONS Oscilent Corporation | 554 Series VCXO - Voltage Control Crystal Oscillator Page 2 of 2 #1 #7 #8 #14 Voltage Control CASE GND OUTPUT VDD PART NUMBER GUIDE Series Number Frequency Voltage Supply Option Frequency Tolerance & Stability (max.) Operating Temp. (°C) Duty Cycle Pulling Range Linearity 554 Oscilent VCXO - 12.0 M -3 D= E= F= G= H= E ±100 PPM ±50 PPM ±25 PPM ±20 PPM ±10 PPM N Blank* = 0~+70 N = -40~+85 -T Blank*= 50±10% T = 50±5% P1 P1 = 50PPM P2 = 100PPM P3 = 150PPM 20 20 = 20% 10 = 10% 05 = 5% Enter your desired 5 = 5VDC 3 = 3.3VDC frequency e.g. 12.0M for 12.000 MHz NOTE: - Deviations on all parameters available. Please consult Oscilent for details. DEFINITIONS: - Click on the characteristic names above for definitions of that particular characteristic. *STANDARDS: - "Blank" part number selections indicate standard variables for that particular characteristic. GULL WING: - Add -G for Gull Wing at end of part number PACKAGING: - Standard tube packaging, add -TR for Tape/Reel. Click here for tape/reel specifications Series No.: 554 Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map