563-120.0M-3HN-TP220

Oscilent Corporation | 563 Series VCXO - Voltage Control Crystal Oscillator Page 1 of 2 VCXO Surface Mount Series Number Package Description Last Modified 563 FEATURES - Wide voltage control range - Wave form symmetry of 40/60% - PECL output - Industry standard PCB SMD Package - RoHs / Lead Free compliant 6 Pad PCB SMD PECL Output Jan. 01 2007 OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS PARAMETERS Output Logic Input Voltage (VDD) Frequency Range (fO) Operating Temperature (TOPR) Storage Temperature (TSTG) Overall Frequency Stability CONDITIONS (a) Frequency Tolerance (b) Temperature Stability (c) Input Voltage Stability (d) Load Stability Input Current (IDD) Aging Rise Time (TR) Fall Time (TF) External Control Voltage (Vc) Output Voltage High "1" VOH Output Voltage Low "0" VOL Load Duty Cycle Start-Up Time (TS) Jitter Linearity Absolute Pull Range (APR) @ 25°C 20% to 80% of Waveform 20% to 80% of Waveform PECL PECL 50% of Waveform RMS 0.3 ~ 3.0 VDD - 1.025 min. VDD - 1.620 max. 50 50 ±10 (Std.) / 50 ±5 (Option) 10 max. 3.5 max. ±20 (Std.) / Custom Spec. Avail. ±30 (Std.), ±50, ±75, ±100 min. CHARACTERISTICS Positive ECL Square Wave (PECL) 3.3 ±10% 5.0 ±10% UNITS VDC MHz °C °C PPM mA PPM/Y nS nS 0.5 ~ 4.5 VDC VDC VDC Ohms % mS ps % PPM 19.440 ~ 180.0 (Inverted Mesa UM-1) 0 ~ +70 (Std.) / -40 ~ 85 (Option) -55 ~ +125 ±20, ±25, ±50, ±100 max. Inclusive of Overall Stability Inclusive of Overall Stability (Operating Temperature) Inclusive of Overall Stability (VDD ±5%) Inclusive of Overall Stability (RL ±5%) 80 max. ±1 max. 2 max. 2 max. 120 max. Oscilent Corporation | 563 Series VCXO - Voltage Control Crystal Oscillator Page 2 of 2 PIN CONNECTIONS #1 Voltage Control #2 Enable (low) / Disable (high) #3 GND #4 OUTPUT #5 Complimentary Output #6 Vcc PART NUMBER GUIDE Series Number Frequency Voltage Supply Option Frequency Tolerance & Stability (max.) Operating Temp. (°C) Duty Cycle Absolute Pulling Range Linearity 563 Oscilent VCXO PECL - 120.0 M -3 D= E= F= G= H= J= E ±100 PPM ±50 PPM ±25 PPM ±20 PPM ±10 PPM ±30 PPM N Blank* = 0~+70 N = -40~+85 -T Blank*= 50±10% T = 50±5% P1 P1 = ±50PPM P2 = ±100PPM P4 = ±30PPM P5 = ±75PPM P6 = ±60PPM 20 20 = ±20% 10 = ±10% Enter your desired 5 = 5VDC 3 = 3.3VDC frequency e.g. 120.0M for 120.000 MHz NOTE: - Deviations on all parameters available. Please consult Oscilent for details. DEFINITIONS: - Click on the characteristic names above for definitions of that particular characteristic. *STANDARDS: - "Blank" part number selections indicate standard variables for that particular characteristic. PACKAGING: - Standard tube packaging, add -TR for Tape/Reel. Click here for tape/reel specifications Series No.: 563 Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map