565-120.0M-5HN-TP2

Oscilent Corporation | 565 Series VCXO - Voltage Control Crystal Oscillator Page 1 of 2 VCXO Surface Mount Series Number Package Description Last Modified 565 FEATURES - Wide voltage control range - Wave form symmetry of 40/60% - HCMOS / TTL output - Industry standard PCB SMD Package - RoHs / Lead Free compliant 4 Pad PCB SMD HCMOS / TTL Output Jan. 01 2007 OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS PARAMETERS Output Logic Input Voltage (VDD) Frequency Range (fO) Operating Temperature (TOPR) Storage Temperature (TSTG) Overall Frequency Stability CONDITIONS (a) Frequency Tolerance (b) Temperature Stability (c) Input Voltage Stability (d) Load Stability Input Current (IDD) Aging Rise Time (TR) & Fall Time (TF) Pin 1 Control Voltage Range Output Voltage High "1" VOH Output Voltage Low "0" VOL Duty Cycle Start-Up Time (TS) Jitter Linearity Absolute Pull Range (APR) @ 25°C < 66.660 MHz > 66.660 MHz TTL Load HCMOS Load TTL Load HCMOS Load 2.7 min. 0.4 max. 0.5 max. 50 ±10 (Std.) / 50 ±5 (Option) 10 max. ±25 max. (under 52 MHz), ±50 max. (over 52 MHz) ±20 (Std.) / Custom Spec. Avail. ±50, ±100, ±150 min. CHARACTERISTICS HCMOS / TTL Output 3.3 ±10% 1.544 ~ 155.520 0 ~ +70 (Std.) / -40 ~ 85 (Option) -55 ~ +125 ±10, ±20, ±25, ±50, ±100 max. Inclusive of Overall Stability Inclusive of Overall Stability (Operating Temperature) Inclusive of Overall Stability (VDD ±5%) Inclusive of Overall Stability (RL ±5%) 10 ~ 45 max. ±1 max. 10 max. (0.4V to 2.4V w/TTL , Waveform/HCMOS) 4 max. (0.4V to 2.4V w/TTL , Waveform/HCMOS) 1.65 ±1.35 2.4 min. VDD - 0.5 min. 2.5 ±2.0 15 ~ 85 max. 5.0 ±10% UNITS VDC MHz °C °C PPM mA PPM/Y nS V VDC VDC % mS ps % PPM Oscilent Corporation | 565 Series VCXO - Voltage Control Crystal Oscillator Page 2 of 2 PIN CONNECTIONS #1 #2 #3 #4 Voltage Control Ground Output VDD PART NUMBER GUIDE Series Number Frequency Voltage Supply Option Frequency Operating Temp. Tolerance & (°C) Stability (max.) Duty Cycle Absolute Pulling Range Linearity 565 Oscilent VCXO PCB SMD - 120.0 M -3 D= E= F= G= H= E N -T Blank*= 50±10% T = 50±5% P1 P1 = 50PPM P2 = 100PPM P3 = 150PPM 20 20 = 20% 10 = 10% 05 = 5% Enter your desired 5 = 5VDC 3 = 3.3VDC frequency e.g. 120.0M for 120.000 MHz ±100 PPM Blank* = 0~+70 ±50 PPM N = -40~+85 ±25 PPM ±20 PPM ±10 PPM NOTE: - Deviations on all parameters available. Please consult Oscilent for details. DEFINITIONS: - Click on the characteristic names above for definitions of that particular characteristic. *STANDARDS: - "Blank" part number selections indicate standard variables for that particular characteristic. PACKAGING: - Standard tube packaging, add -TR for Tape/Reel. Click here for tape/reel specifications Series No.: 565 Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map