567-25.0M-3DN-TP2

Oscilent Corporation | 567 Series VCXO - Voltage Control Crystal Oscillator Page 1 of 2 VCXO Surface Mount Series Number Package Description Last Modified 567 FEATURES - Wide voltage control range - Wave form symmetry of 40/60% - HCMOS / TTL output J-Lead Plastic HCMOS / TTL Output Jan. 01 2007 - Industry standard J-Lead Plastic Package - RoHs / Lead Free compliant OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS PARAMETERS Output Logic Input Voltage (VDD) Frequency Range (fO) Operating Temperature (TOPR) Storage Temperature (TSTG) Overall Frequency Stability CONDITIONS (a) Frequency Tolerance (b) Temperature Stability (c) Input Voltage Stability (d) Load Stability Input Current (IDD) Aging Rise Time (TR) & Fall Time (TF) Pin 1 Control Voltage Range Output Voltage High "1" VOH Output Voltage Low "0" VOL Duty Cycle Start-Up Time (TS) Jitter Linearity Absolute Pull Range (APR) @ 25°C TTL Load HCMOS Load TTL Load HCMOS Load 2.7 min. 0.4 max. 0.5 max. 50 ±10 (Std.) / 50 ±5 (Option) 6 max. ±25 max. ±20 (Std.) ±50, ±100, ±150 min. CHARACTERISTICS HCMOS / TTL Output 3.3 ±10% 1.544 ~ 32.000 0 ~ +70 (Std.) / -40 ~ 85 (Option) -55 ~ +125 ±50, ±100 max. Inclusive of Overall Stability Inclusive of Overall Stability (Operating Temperature) Inclusive of Overall Stability (VDD ±10%) Inclusive of Overall Stability (RL ±5%) 10 ~ 35 max. ±5 max. 8 max. (0.4V to 2.4V w/TTL , 20% to 80% /HCMOS) 1.65 ±1.35 2.4 min. VDD - 0.5 min. 2.5 ±2.0 15 ~ 50 max. 5.0 ±10% UNITS VDC MHz °C °C PPM mA PPM/Y nS V VDC VDC % mS ps % PPM Oscilent Corporation | 567 Series VCXO - Voltage Control Crystal Oscillator Page 2 of 2 PIN CONNECTIONS #1 #2 #3 #4 Voltage Control Ground Output VDD PART NUMBER GUIDE Series Number Frequency Voltage Supply Option Frequency Operating Temp. Tolerance & (°C) Stability (max.) Duty Cycle Absolute Pulling Range Linearity 567 Oscilent VCXO - 25.0 M -3 E N -T Blank*= 50±10% T = 50±5% P1 P1 = 50PPM P2 = 100PPM P3 = 150PPM 20 20 = 20% Enter your desired 5 = 5VDC 3 = 3.3VDC frequency e.g. 25.0M for 25.000 MHz D = ±100 PPM Blank* = 0~+70 E = ±50 PPM N = -40~+85 NOTE: - Deviations on all parameters available. Please consult Oscilent for details. DEFINITIONS: - Click on the characteristic names above for definitions of that particular characteristic. *STANDARDS: - "Blank" part number selections indicate standard variables for that particular characteristic. PACKAGING: - Standard tube packaging, add -TR for Tape/Reel. Click here for tape/reel specifications Series No.: 567 Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map