802-RF1575.42M-A

Oscilent Corporation RF SAW Filter | 802-RF1575.42M-A Page 1 of 2 RF SAW Filter Part Number Package Application Last Modified 802-RF1575.42M-A . TYPE : 3.0 x 3.0 SMD GPS Apr. 12 2003 1575.42 MHz RF SAW Filter PART NUMBER : 802-RF1575.42M-A . OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS PARAMETERS Center Frequency Insertion Loss DC Voltage Input Power Operating Temperature Storage Temperature Amplitude Ripple Stopband Attenuation Condition 1574.22 ~ 1576.62 MHz 1574.22 ~ 1576.62 MHz DC ~ 1450.0MHz 1450.0 ~ 1500.0 MHz 1625.0 ~ 1640.0 MHz 1640.0 ~ 2000.0 MHz 2000.0 ~ 3000.0 MHz VSWR Teminating Impedance 1574.22 ~ 1576.62 MHz Minimum -40 -40 35.0 30.0 40.0 30.0 30.0 Typical 1575.42 1.85 0.15 39.0 38.0 48.0 37.0 30.9 1.3 50 Maximum 2.0 0 10 +85 +85 1.0 2.0 ohm Units MHz dB V dBm °C °C dB dB * Maximum Rating (Ta=25°C) ** Custom SAW RF Filters available. Contact Oscilent for assistance. . Pin Layout A B C D E F Ground Output Ground Ground Input Ground Frequency Reponse http://www.oscilent.com/spec_pages/rf_sawfilter/rf_802_rf1575_42a.htm 12/30/2005 Oscilent Corporation RF SAW Filter | 802-RF1575.42M-A Page 2 of 2 VSWR (S11, S22) Smith Chart Oscilent Corporation - CALL 949.252.0522 17962 Sky Park Circle . Building D . Irvine . CA 92614 . USA Fax: 949.252.0599 . E-Mail: Sales@Oscilent.com Part No.: 802-RF1575.42M-A Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map http://www.oscilent.com/spec_pages/rf_sawfilter/rf_802_rf1575_42a.htm 12/30/2005