802-RF412.5M-A

Oscilent Corporation RF SAW Filter | 802-RF412.5M-A Page 1 of 3 RF SAW Filter Part Number Package Application Last Modified 802-RF412.5M-A . TYPE : 3.0 x 3.0 SMD CDMA450 Jan. 01, 2007 CDMA450, RF-Tx SAW Filter PART NUMBER : 802-RF412.5M-A .. OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS PARAMETERS Center Frequency (Fo) Maximum Insertion Loss Stop Band Attenuation: Condition 410.0~415.0MHz 0.3~ 400.0 MHz 420.0~ 425.0 MHz 425.0~ 1700.0MHz 1700~ 2000.0 MHz Source Impedence (single ended)* Load Impendance (single ended)* VSWR Maximum Input Power Operating Temperature * No Matching Network 410.0~ 415.0MHz Minimum 23 30 20 15 -30 Typical 412.5 2.5 26 48 27 22 50 50 1.3 Maximum 3.2 2.0 30 +80 ohm ohm dBm ºC dB Units MHz dB . PACKAGE OUTLINE (mm) PIN LAYOUT A B C D E F Ground Out Ground Ground In Ground TEST FIXTURE Oscilent Corporation RF SAW Filter | 802-RF412.5M-A Page 2 of 3 Source/Load Impedance = 50 ohms FREQUENCY RESPONSE Oscilent Corporation RF SAW Filter | 802-RF412.5M-A Page 3 of 3 Part No.: 802-RF412.5M-A Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map