802-RF881.5M-B

Oscilent Corporation RF SAW Filter | 802-RF881.5M-B Page 1 of 2 RF SAW Filter Part Number Package Application Last Modified 802-RF881.5M-B . TYPE : 3.0 x 3.0 SMD CDMA Rx Apr. 12 2003 881.5 MHz RF SAW Filter PART NUMBER : 802-RF881.5M-B . OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS PARAMETERS Center Frequency Insertion Loss DC Voltage Input Power Operating Temperature Storage Temperature Ripple Stopband Attenuation Condition 869.0 ~ 894.0 MHz 869.0 ~ 894.0 MHz DC ~ 779MHz 779.0 ~ 849.0 MHz 914.0 ~ 970.0 MHz 970.0 ~ 1049.0 MHz 1049.0 ~ 2000.0 MHz VSWR Teminating Impedance 869.0 ~ 894.0 MHz Minimum -30 -40 50.0 45.0 28.0 50.0 40.0 Typical 881.5 2.8 0.7 57.0 49.0 33.0 62.0 46.0 1.7 50 Maximum 3.5 5 15 +65 +85 1.6 2.0 ohm Units MHz dB V dBm °C °C dB dB * Maximum Rating (Ta=25°C) ** Custom SAW RF Filters available. Contact Oscilent for assistance. . Pin Layout A B C D E F Ground Output Ground Ground Input Ground Frequency Reponse http://www.oscilent.com/spec_pages/rf_sawfilter/rf_802_rf881_5b.htm 12/28/2005 Oscilent Corporation RF SAW Filter | 802-RF881.5M-B Page 2 of 2 VSWR (S11, S22) Smith Chart Oscilent Corporation - CALL 949.252.0522 17962 Sky Park Circle . Building D . Irvine . CA 92614 . USA Fax: 949.252.0599 . E-Mail: Sales@Oscilent.com Part No.: 802-RF881.5M-B Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map http://www.oscilent.com/spec_pages/rf_sawfilter/rf_802_rf881_5b.htm 12/28/2005