802-RF902.5M-B

Oscilent Corporation RF SAW Filter | 802-RF902.5M-B Page 1 of 2 RF SAW Filter Part Number Package Application Last Modified 802-RF902.5M-B . TYPE : 3.0 x 3.0 SMD GSM System Jan. 10 2003 902.5 MHz RF SAW Filter PART NUMBER : 802-RF902.5M-B . OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS PARAMETERS Center Frequency Insertion Loss DC Voltage Input Power Operating Temperature Storage Temperature Ripple Stopband Attenuation Condition 890.0 ~ 915.0 MHz 890.0 ~ 915.0 MHz DC ~ 845MHz 845.0 ~ 870.0 MHz 925.0 ~ 935.0 MHz 935.0 ~ 980.0 MHz 980.0 ~ 1200.0 MHz 1200.0 ~ 3000.0 MHz VSWR Teminating Impedance 890.0 ~ 915.0 MHz Minimum -25 -40 48.0 40.0 5.0 25.0 45.0 25.0 Typical 902.5 3.0 0.8 52.0 45.0 15.0 32.0 49.0 38.0 1.8 50 Maximum 3.5 0 10 +75 +85 1.5 2.3 ohm Units MHz dB V dBm °C °C dB dB * Maximum Rating (Ta=25°C) ** Custom SAW RF Filters available. Contact Oscilent for assistance. . Pin Layout A B C D E F Ground Output Ground Ground Input Ground Frequency Reponse http://www.oscilent.com/spec_pages/rf_sawfilter/rf_802_rf902_5b.htm 12/28/2005 Oscilent Corporation RF SAW Filter | 802-RF902.5M-B Page 2 of 2 VSWR (S11, S22) Smith Chart Oscilent Corporation - CALL 949.252.0522 17962 Sky Park Circle . Building D . Irvine . CA 92614 . USA Fax: 949.252.0599 . E-Mail: Sales@Oscilent.com Part No.: 802-RF902.5M-B Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map http://www.oscilent.com/spec_pages/rf_sawfilter/rf_802_rf902_5b.htm 12/28/2005