805-RF315.0M-B

Oscilent Corporation RF SAW Filter | 805-RF315.0M-B Page 1 of 2 RF SAW Filter Part Number Package Application Last Modified 805-RF315.0M-B . TYPE : 5.0 x 5.0 SMD Remote Control Jan. 01, 2007 RF SAW Filter PART NUMBER : 805-RF315.0M-B .. OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS PARAMETERS Center Frequency (Fo) Minimum Insertion Loss IL MIN Stop Band Attenuation: Condition 314.80 ~ 315.20 MHz 10.0 ~ 270.0 MHz 270.0 ~ 309.0 MHz 309.0 ~ 314.0 MHz 316.0 ~ 335.0MHz 335.0 ~ 400.0 MHz 400.0 ~ 1000.0MHz Passband Relative to IL MIN Passband Relative to IL MIN Source Impedence (single ended)* Load Impendance (single ended)* Maximum Input Power Operating Temperature 314.75 ~ 315.24 MHz 314.69 ~ 315.30 MHzMinimum 45 35 15 10 35 45 -40 Typical 315.0 3.0 50 40 20 15 40 50 1.5 2.0 50 50 Maximum 5.0 3.0 6.0 0 +85 dB ohm ohm dBm ºC dB Units MHz dB * With Matching Network (Ref. Testing Environment Circuit as shown) . PACKAGE OUTLINE (mm) PIN LAYOUT A B C D E F G H In Ground Ground Ground Out Ground Ground Ground TEST FIXTURE Oscilent Corporation RF SAW Filter | 805-RF315.0M-B Page 2 of 2 L1 = 82 nH L2 = 82 nH C1 = 5.6pF C2 = 5.6pF Source/ Load Impedance = 50 ohms FREQUENCY RESPONSE Part No.: 805-RF315.0M-B Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map