807-IF246.0M-B

Oscilent Corporation IF SAW Filter | 807-IF246.0M-B Page 1 of 3 RF SAW Filter Part Number Package Application Last Modified 807-IF246.0M-B . TYPE : 7.0 x 5.0 SMD Mobile Communication Jan. 01, 2007 IF SAW Filter PART NUMBER : 807-IF246.0M-B .. OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS PARAMETERS Center Frequency (Fo) Minimum Insertion Loss Stop Band Attenuation: Condition Fo +/- 50.0 kHz Fo -25.00 ~ Fo-0.60 MHz Fo -0.60 ~ Fo -0.40 MHz Fo -0.40 ~ Fo -0.20 MHz Fo +0.20 ~ Fo +0.40 MHz Fo -0.40 ~ Fo -0.60 MHz Fo -0.60 ~ Fo -25.0 MHz Source Impedence (single ended)* Load Impendance (single ended)* Amplitude Ripple Fo +/- 50.0 kHz Minimum 50.0 32.0 10.0 10.0 32.0 50.0 Typical 246 5.0 58.0 45.0 25.0 25.0 45.0 60.0 50 50 1.2 Maximum 6.5 2.0 ohm ohm dBp-p dB Units MHz dB * With Matching Network (Ref. Testing Environment Circuit as shown below) . PACKAGE OUTLINE (mm) Oscilent Corporation IF SAW Filter | 807-IF246.0M-B Page 2 of 3 TEST FIXTURE TEST FIXTURE AND VALUES/SOURCE AND LOAD IMPEDANCE 50 ohm INPUT: OUTPUT: L1: 68 nH; C1: 0.75pF L2: 120 nH; C2: 0.5pF FREQUENCY RESPONSE Oscilent Corporation IF SAW Filter | 807-IF246.0M-B Page 3 of 3 Part No.: 807-IF246.0M-B Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map