807-SL300.0M-20

Oscilent Corporation IF SAW Filter | 807-SL300.0M-20 Page 1 of 2 IF SAW Filter Part Number Package Application Last Modified 807-SL300.0M-20 . TYPE : 7.0 x 5.0mm SMD Base Station & Repeater Apr 18, 2007 300.00 MHz Filter Low Loss PART NUMBER : 807-SL300.0M-20 .. OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS PARAMETERS Center Frequency Insertion Loss Source Impedance (single ended)* Load Impedance (single ended)* Bandwidth -1.0 dB Bandwidth -3.0 dB Bandwidth -40.0 dB Amplitude Ripple (Fo +/- 2.5MHz) Amplitude Ripple Group Delay Variation Group Delay Variation Absolute Delay at Fo Relative Attenuation Lower Sidelobe Upper Sidelobe Ambient Temperature Temperature Coefficient Minimum 20.0 21.0 40 40 Typical 300.0 10.30 50 50 21.95 23.55 0.4 0.7 65 50 0.510 25 -94 Maximum 15 31.0 0.7 1.5 120 100 1.0 Units MHz dB ohm ohm MHz MHz MHz dBp-p dBp-p nsec nsec µsec dB dB °C ppm/°C *Custom parameters available. Contact Oscilent Sales for discussion. . PACKAGE OUTLINE (mm) Oscilent Corporation IF SAW Filter | 807-SL300.0M-20 Page 2 of 2 TEST FIXTURE FREQUENCY RESPONSE Part No.: 807-SL300.0M-20 Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map