809-IF85.38M-G

Oscilent Corporation IF SAW Filter | 809-IF85.38M-G Page 1 of 2 IF SAW Filter Part Number Package Application Last Modified 809-IF85.38M-G TYPE : 9.1 x 4.8 SMD Mobile Communication Jan. 01, 2007 85.38 MHz IF SAW Filter PART NUMBER : 809-IF85.38M-G OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS PARAMETERS Center Frequency Insertion Loss at Fo Attenuation Fo +630 kHz Attenuation Fo -630 kHz Attenuation Fo +900 kHz Attenuation Fo -900 kHz Attenuation Fo +1.7 MHz Attenuation Fo -1.7 Mhz Source Impedance (Single Ended)* Load Impedance (Single Ended)* Substrate Material Passband Ripple at Fo + 300 kHz Minimum 33 33 35 35 Typical 85.38 9.6 3.8 3.8 41 44 43 42 50 50 Quartz 0.7 Maximum 12.5 5.0 5.0 1.2 Units MHz dB dB dB dB dB dB dB ohm ohm dB * With Matching Network (Ref. Testing Environment Circuit as shown below) Those impedances could be modified with different impedance values and/or structures, if necessary. ** Custom SAW IF Filters available. Contact Oscilent for assistance. PACKAGE OUTLINE (mm) TEST CIRCUIT Oscilent Corporation IF SAW Filter | 809-IF85.38M-G Page 2 of 2 SOURCE AND LOAD IMPEDANCE: 50 ohm INPUT: OUTPUT: L1: TBD nH, C1: TBD pF L2: TBD nH, C2:TBD pF L3: TBD nH L4: TBD nH FREQUENCY RESPONSE Part No.: 809-IF85.38M-G Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map