813-IF70.0M-BB

Oscilent Corporation IF SAW Filter | 813-IF70.0M-BB Page 1 of 3 IF SAW Filter Part Number Package Application Last Modified 813-IF70.0M-BB . TYPE : 13.3 x 6.5 SMD IF SAW Filter Jan. 01, 2007 70.0MHz IF SAW Filter PART NUMBER : 813-IF70.0M-BB .. OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS PARAMETERS Center Frequency (Fo) Insertion Loss at Fo Source Impedance (single ended)* Load Impedance (single ended)* Temperature Coefficient Amplitude Ripple within fo +/-4.35MHz 1dB Bandwidth 3dB Bandwidth 40dB Bandwidth Relative Attenuation from 10 to 64.5 MHz from 75.5 to 140 MHz Absolute Delay at Fo IN/OUT Return Loss at Fo Group Delay Variation/ fo +/-4.35MHz 40 40 43 43 1.64 65 Minimum 69.95 9.05 9.35 Typical 70.00 23.5 50 50 -20 0.8 9.15 9.42 10.70 120 dB dB us dB ns Maximum 70.05 25.0 1.0 10.80 Units MHz dB ohm ohm ppm/C dBp-p MHz MHz MHz *With Matching Network (Ref. Testing Environment Circuit as Shown Below). Those impedances could be modified with different impedance values and/or structures, if necessary . PACKAGE OUTLINE (mm) Oscilent Corporation IF SAW Filter | 813-IF70.0M-BB Page 2 of 3 TEST CIRCUIT TEST FIXTURE AND VALUES/SOURCE AND LOAD IMPEDANCE 50 ohm INPUT: OUTPUT: L1: 158.2 nH Q>40: ; C1: 47 pF L2: 276 nH Q>40; C2: 56 pF FREQUENCY RESPONSE Part No.: 813-IF70.0M-BB Oscilent Corporation IF SAW Filter | 813-IF70.0M-BB Page 3 of 3 Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map