813-IF70.0M-T

Oscilent Corporation IF SAW Filter | 813-IF70.0M-T Page 1 of 2 IF SAW Filter Part Number Package Application Last Modified 813-IF70.0M-T . TYPE : 13.3 x 6.5 SMD Base Station & Repeater May 02 2003 70.0 MHz Bandpass Filter 12.2 MHz Bandwidth PART NUMBER : 813-IF70.0M-T .. OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS PARAMETERS Center Frequency Insertion Loss 1dB Bandwidth 3dB Bandwidth 40dB Bandwidth Ultimate Rejection Passband Ripple Group Delay Variation Absolute Delay Substrate Material Ambient Temperature Minimum 69.90 11.65 12.20 Typical 70.0 24.5 11.86 12.34 14.60 40 0.80 40 1.08 LN 25 Maximum 70.10 26.0 14.80 1.0 150 Units MHz dB MHz MHz MHz dB dB nsec µsec °C * Custom SAW IF Filters available. Contact Oscilent for assistance. . PACKAGE OUTLINE (mm) TEST FIXTURE Source/Load Impedance = 50 ohms Part No.: 813-IF70.0M-T Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator Oscilent Corporation IF SAW Filter | 813-IF70.0M-T Page 2 of 2 Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map