813-IF99.84M-A

Oscilent Corporation IF SAW Filter | 813-IF99.84M-A Page 1 of 2 IF SAW Filter Part Number Package Application Last Modified 813-IF99.84M-A TYPE : 13.3 x 6.5 SMD IF SAW Filter Jan. 01, 2007 99.84MHz IF SAW Filter PART NUMBER : 813-IF99.84M-A OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS PARAMETERS Center Frequency (Fo) Insertion Loss at Fo Source Impedance (single ended)* Load Impedance (single ended)* Temperature Coefficient Amplitude Ripple 1.2dB Bandwidth 5.0dB Bandwidth 30dB Bandwidth Relative Attenuation: 10MHz~ 98.1 MHz 101.2MHz~ 150 MHz Operating Temperature Absolute Delay at Fo Group Delay Variation 45 45 52 50 1.68 Minimum 260 Typical 99.84 9 50 50 -0.03 375 770 1.58 200 dB dB C us ns Maximum 12 1.0 930 1.69 Units MHz dB ohm ohm ppm/C dBp-p KHz KHz MHz *With Matching Network (Ref. Testing Environment Circuit as Shown Below). Those impedances could be modified with different impedance values and/or structures, if necessary PACKAGE OUTLINE (mm) TEST CIRCUIT Oscilent Corporation IF SAW Filter | 813-IF99.84M-A Page 2 of 2 TEST FIXTURE AND VALUES/SOURCE AND LOAD IMPEDANCE 50 ohm INPUT: OUTPUT: L1: 180 nH Q>40; C1: 47 pF L2: 180 nH Q>40; C2: 62 pF FREQUENCY RESPONSE Part No.: 813-IF99.84M-A Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map