813-SL125.0M-28

Oscilent Corporation IF SAW Filter | 813-SL125.0M-28 Page 1 of 2 IF SAW Filter Part Number Package Application Last Modified 813-SL125.0M-28 TYPE : 13.3 x 6.5 SMD Low-Loss 125MHz Jan 01, 2007 Low-Loss 125MHz IF SAW Filter PART NUMBER : 813-SL125.0M-28 OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS PARAMETERS Center Frequency (Fo) Insertion Loss at Fo Source Impedance (single ended)* Load Impedance (single ended)* Temperature Coefficient Amplitude Ripple fo+/-13.0MHz 1dB Bandwidth 3dB Bandwidth 40dB Bandwidth Relative Attenuation: Lower Sidelobe Upper Sidelobe Absolute Delay at Fo Group Delay Variation fo +/-13.0 MHz IN/OUT Return Loss at Fo 40 40 47 47 0.85 25 Minimum 27.5 28.5 Typical 125.0 15.5 50 50 -94 0.4 28.5 29.5 33.3 50 dB dB us ns dB Maximum 17.0 1.0 34.5 Units MHz dB ohm ohm ppm/C dBp-p MHz MHz MHz *With Matching Network (Ref. Testing Environment Circuit as Shown Below). Those impedances could be modified with different impedance values and/or structures, if necessary PACKAGE OUTLINE (mm) TEST CIRCUIT Oscilent Corporation IF SAW Filter | 813-SL125.0M-28 Page 2 of 2 TEST FIXTURE AND VALUES/SOURCE AND LOAD IMPEDANCE 50 ohm INPUT: OUTPUT: L1: 33 nH; Q>40 L2: 33 nH; Q>40 FREQUENCY RESPONSE Part No.: 813-SL125.0M-28 Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map