813-SL140.0M-07

Oscilent Corporation IF SAW Filter | 813-SL140.0M-07 Page 1 of 2 IF SAW Filter Part Number Package Application Last Modified 813-SL140.0M-07 . TYPE : 13.3 x 6.5 SMD Base Station & Repeater Apr 18, 2007 140.0 MHz Bandpass Filter Low Loss Narrow Bandwidth PART NUMBER : 813-SL140.0M-07 .. OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS PARAMETERS Center Frequency Insertion Loss at Fo Source Impedance (single ended)* Load Impedance (single ended)* Bandwidth at -1.0 dB Bandwidth at -3.0 dB Bandwidth at -40.0 dB Bandwidth at -45.0 dB Relative Attenuation: Lower Sidelobe Upper Sidelobe Amplitude Ripple Group Delay Variation Absolute Delay at Fo Temperature Coefficient Minimum 139.85 6.5 7.4 45 45 Typical 140.0 12.0 50 50 6.7 7.6 10.4 10.8 48 50 0.4 60 0.96 -94 Maximum 140.15 13.5 10.6 11.0 1.0 100 Units MHz dB ohm ohm MHz MHz MHz MHz dB dB dBp-p nsec µsec ppm/°C *With Matching Network (Reference Testing Environment Circuit as shown) Modifiy Impedance Values as necessary. . PACKAGE OUTLINE (mm) TEST FIXTURE Oscilent Corporation IF SAW Filter | 813-SL140.0M-07 Page 2 of 2 PIN Description IN-11, OUT-5, GROUND-1,2,3,4,6,7,8,9,10,12 FREQUENCY RESPONSE Part No.: 813-SL140.0M-07 Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map