813-SL160.0M-10

Oscilent Corporation IF SAW Filter | 813-SL160.0M-10 Page 1 of 2 IF SAW Filter Part Number Package Application Last Modified 813-SL160.0M-10 TYPE : 13.3 x 6.5 SMD Low-Loss 160MHz Jan 01, 2007 Low-Loss 160MHz IF SAW Filter PART NUMBER : 813-SL160.0M-10 OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS PARAMETERS Center Frequency (Fo) Insertion Loss at Fo Source Impedance (single ended)* Load Impedance (single ended)* Temperature Coefficient Amplitude Ripple -1.0 dB Bandwidth -3.0 dB Bandwidth -40.0 dB Bandwidth Relative Attenuation: Lower Sidelobe Upper Sidelobe Absolute Delay at Fo Group Delay Variation IN/OUT Return Loss at Fo 40 40 50 43 0.91 55 Minimum 9.5 10.3 Typical 160.0 9.7 50 50 -94 0.8 9.8 10.6 13.6 150 dB dB us ns dB Maximum 12.0 1.0 14.5 Units MHz dB ohm ohm ppm/C dBp-p MHz MHz MHz *With Matching Network (Ref. Testing Environment Circuit as Shown Below). Those impedances could be modified with different impedance values and/or structures, if necessary PACKAGE OUTLINE (mm) TEST CIRCUIT Oscilent Corporation IF SAW Filter | 813-SL160.0M-10 Page 2 of 2 TEST FIXTURE AND VALUES/SOURCE AND LOAD IMPEDANCE 50 ohm INPUT: OUTPUT: L1: 27nH, Q>40; C1: 68 pF L2: 27nH, Q>40; C2: 43 pF FREQUENCY RESPONSE Part No.: 813-SL160.0M-10 Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map