Oscilent Corporation IF SAW Filter | 813-SL70.0M-04
Page 1 of 2
IF SAW Filter Part Number Package Application Last Modified
813-SL70.0M-04
TYPE :
13.3 x 6.5 SMD
IF SAW Filter
Jan 01, 2007
Low-Loss 70MHz IF SAW Filter
PART NUMBER :
813-SL70.0M-04 OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS
PARAMETERS Center Frequency (Fo) Insertion Loss at Fo Source Impedance (single ended)* Load Impedance (single ended)* Temperature Coefficient Amplitude Ripple within fo +/1.5MHz 1dB Bandwidth 3dB Bandwidth 40dB Bandwidth Relative Attenuation: from 10 to 64.5MHz from 74 to 140MHz Absolute Delay at Fo IN/OUT Return Loss at Fo Group Delay Variation/ fo +/-1.5MHz 40 40 45 43 1.0 180 Minimum 69.8 Typical 70.0 8.5 50 50 -94 0.8 3.68 4.46 7.18 dB dB us dB us Maximum 70.2 10.0 1.0 Units MHz dB ohm ohm ppm/C dBp-p MHz MHz MHz
*With Matching Network (Ref. Testing Environment Circuit as Shown Below). Those impedances could be modified with different impedance values and/or structures, if necessary
PACKAGE OUTLINE
(mm)
TEST CIRCUIT
Oscilent Corporation IF SAW Filter | 813-SL70.0M-04
Page 2 of 2
TEST FIXTURE AND VALUES/SOURCE AND LOAD IMPEDANCE 50 ohm INPUT: OUTPUT: L1:220 nH Q>40 L2: 100 nH Q>40; C2: 22pF
FREQUENCY RESPONSE
Part No.:
813-SL70.0M-04
Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map
很抱歉,暂时无法提供与“813-SL70.0M-04”相匹配的价格&库存,您可以联系我们找货
免费人工找货