813-SL70.0M-16

Oscilent Corporation IF SAW Filter | 813-SL70.0M-16 Page 1 of 3 IF SAW Filter Part Number Package Application Last Modified 813-SL70.0M-16 . TYPE : 13.3 x 6.5 SMD IF SAW Filter Jan. 01, 2007 Low-Loss 70MHz IF SAW Filter PART NUMBER : 813-SL70.0M-16 .. OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS PARAMETERS Center Frequency (Fo) Insertion Loss at Fo Source Impedance (single ended)* Load Impedance (single ended)* Temperature Coefficient Amplitude Ripple within fo +/-7.0MHz 1dB Bandwidth 3dB Bandwidth 40dB Bandwidth Relative Attenuation: from 10 to 59.5 MHz from 82 to 140MHz Absolute Delay at Fo IN/OUT Return Loss at Fo Group Delay Variation/ fo +/-7.0MHz 40 40 43 43 0.88 50 Minimum 69.8 15.2 16.0 Typical 70.0 12.2 50 50 -94 0.5 15.45 16.42 20.17 80 dB dB us dB ns Maximum 70.2 13.2 1.0 21.0 Units MHz dB ohm ohm ppm/C dBp-p MHz MHz MHz *With Matching Network (Ref. Testing Environment Circuit as Shown Below). Those impedances could be modified with different impedance values and/or structures, if necessary . PACKAGE OUTLINE (mm) Oscilent Corporation IF SAW Filter | 813-SL70.0M-16 Page 2 of 3 TEST CIRCUIT TEST FIXTURE AND VALUES/SOURCE AND LOAD IMPEDANCE 50 ohm INPUT: OUTPUT: L1: 220 nH Q>40 L2: 220 nH Q>40 FREQUENCY RESPONSE Part No.: 813-SL70.0M-16 Oscilent Corporation IF SAW Filter | 813-SL70.0M-16 Page 3 of 3 Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map