815-IF43.5M-C

Oscilent Corporation IF SAW Filter | 815-IF43.5M-C Page 1 of 2 IF SAW Filter Part Number Package Application Last Modified 815-IF43.5M-C . TYPE : 15.9 x 5.9 Thru Hole Digital A/V & Broadcasting June 17 2003 43.5 MHz Vestigial Sideband Filter PART NUMBER : 815-IF43.5M-C . Horizontal : 1.5 MHz/Div Veritical : 10 dB/Div Horizontal : 0.6 MHz/Div Veritical : 1 dB/Div Veritical : 100 ns/Div . OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS PARAMETERS Reference Level Frequency Insertion Loss Relative Attenutation Picture Carrier (45.75 Mhz) Picture Carrier (46.50 MHz) Sound Carrier (41.25 MHz) Adjacent Picture Carrier (39.75 MHz) Adjacent Sound Carrier (47.25 MHz) Lower Sidelobe (35.0 ~ 39.25 MHz) Upper Sidelobe (47.75 ~ 55.0 MHz) Reflected Wave Signal Suppression 2.0 ~ 6.0 us after main Feedthrough Signal Suppression Group Delay Variation Temperature Coefficient of Freq (TCf) 1.3 ~ 1.2 us before main Minimum -1.3 0.6 -1.2 30.0 30.0 30.0 30.0 40 Typical 43.5 23.5 -0.3 1.4 0.4 38.0 38.0 36.0 31.5 48 43 80 -72 Maximum 26 0.7 2.6 0.8 nsec ppm/K dB Units MHz dB * Custom SAW IF Filters available. Contact Oscilent for assistance. . PACKAGE OUTLINE (mm) TEST FIXTURE http://www.oscilent.com/spec_pages/if_sawfilter/if_815_if43_5c.htm 12/28/2005 Oscilent Corporation IF SAW Filter | 815-IF43.5M-C Page 2 of 2 Source Impedance = 50 ohms Load Impedance = 50 ohms Part No.: 815-IF43.5M-C Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map http://www.oscilent.com/spec_pages/if_sawfilter/if_815_if43_5c.htm 12/28/2005