815-IF44.0M-A

Oscilent Corporation IF SAW Filter | 815-IF44.0M-A Page 1 of 1 IF SAW Filter Part Number Package Application Last Modified 815-IF44.0M-A . TYPE : 15.9 x 5.9 Thru Hole Digital Cable TV May 22 2003 44.00 MHz Bandpass Filter 6.2 MHz Bandwidth PART NUMBER : 815-IF44.0M-A .. OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS PARAMETERS Center Frequency Insertion Loss 3 dB Bandwidth 35 dB Bandwidth Lower Sidelobe (35.0 ~ 39.90 MHz) Upper Sidelobe (48.1 ~ 50.0 MHz) Upper Sidelobe (50.0 ~ 55.0 MHz) Passband Ripple Ambient Temperature Minimum 6.15 40 35 38 Typical 44.00 16.0 6.2 7.8 43 38 42 0.6 25 Maximum 17.0 8.0 1.0 Units MHz dB MHz MHz dB dB dB dB °C * Custom SAW IF Filters available. Contact Oscilent for assistance. . PACKAGE OUTLINE (mm) TEST FIXTURE Source Impedance = 50 ohms Load Impedance = 2 Kohms / 3pF Part No.: 815-IF44.0M-A Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map