819-IF160.0M-E

Oscilent Corporation IF SAW Filter | 819-IF160.0M-E Page 1 of 2 IF SAW Filter Part Number Package Application Last Modified 819-IF160.0M-E . TYPE : 19 x 6.5 SMD Base Station, Repeater, HDR, IMT-2000 May 30 2003 160.0 MHz Bandpass Filter 1.30 MHz Bandwidth PART NUMBER : 819-IF160.0M-E . Horizontal : 1.0 MHz/Div Veritical : 10 dB/Div Horizontal : 0.2 MHz/Div Veritical : 1 dB/Div Veritical : 100 ns/Div . OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS PARAMETERS Center Frequency Insertion Loss 0.5dB Bandwidth 3dB Bandwidth 30dB Bandwidth Passband Ripple Group Delay Variation Absolute Delay Ultimate Rejection Substrate Material Ambient Temperature Phase Linearity Minimum 159.95 1.18 1.30 35 Typical 160.0 18.0 1.35 1.60 2.2 0.49 170 2.5 50 Quartz 25 2.9 Maximum 160.05 21.0 3.0 0.8 200 7.0 Units MHz dB MHz MHz MHz dB nsec µsec dB °C deg * Custom SAW IF Filters available. Contact Oscilent for assistance. . PACKAGE OUTLINE (mm) TEST FIXTURE http://www.oscilent.com/spec_pages/if_sawfilter/if_819_if160_0e.htm 12/28/2005 Oscilent Corporation IF SAW Filter | 819-IF160.0M-E Page 2 of 2 L1 = 80nH C1 = 36pF L2 = 56nH C2 = 39pF Source/Load Impedance = 50 ohms Part No.: 819-IF160.0M-E Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map http://www.oscilent.com/spec_pages/if_sawfilter/if_819_if160_0e.htm 12/28/2005