820-IF120.0M-C

IF SAW Filter Part Number Package Application Last Modified 820-IF120.0M-C . TYPE : 20.2 x 12.6mm IF SAW Filter Apr 18, 2007 120.0 MHz IF SAW Filter PART NUMBER : 820-IF120.0M-C .. OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS PARAMETERS Center Frequency (Fo) Insertion Loss at Fo Source Impedance (single ended)* Load Impedance (single ended)* Bandwidth at -1.0 dB Bandwidth at -3.0 dB Bandwidth at -35.0 dB Bandwidth at -40.0 dB Amplitude Ripple Ultimate Rejection Group Delay Variation Absolute Delay at Fo Temperature Coefficient Minimum 119.94 20.25 50 Typical 120.0 22.2 50 50 19.95 20.35 21.70 21.80 0.75 55 50 2.2 -72 Maximum 120.06 24.0 22.0 1.0 100 Units MHz dB ohm ohm MHz MHz MHz MHz dBp-p dB nsec µsec ppm/°C *With Matching Network (Reference Testing Environment Circuit as shown) Modify Impedance Values as necessary. . PACKAGE OUTLINE (mm) PIN Descriptions IN-1, Out-5, Ground-2,3,4,6 TESTING ENVIRONMENT Frequency Response Part No.: 820-IF120.0M-C Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map