820-IF160.0M-A

Oscilent Corporation IF SAW Filter | 820-IF160.0M-A Page 1 of 1 IF SAW Filter Part Number Package Application Last Modified 820-IF160.0M-A . TYPE : 20.2 x 12.6 Thru Hole Base Station & Repeater May 30 2003 160.0 MHz Bandpass Filter 24.0 MHz Bandwidth PART NUMBER : 820-IF160.0M-A .. OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS PARAMETERS Center Frequency Insertion Loss 3dB Bandwidth 40dB Bandwidth Passband Ripple Ultimate Rejection Substrate Material Ambient Temperature Minimum 24.0 50 Typical 160.0 25.5 24.3 27.8 0.7 55 LN 25 Maximum 27.0 28.0 1.0 Units MHz dB MHz MHz dB dB °C * Custom SAW IF Filters available. Contact Oscilent for assistance. . PACKAGE OUTLINE (mm) TEST FIXTURE Source/Load Impedance = 50 ohms * PKG ground required for excellent spurious levels Part No.: 820-IF160.0M-A Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map http://www.oscilent.com/spec_pages/if_sawfilter/if_820_if160_0a.htm 12/28/2005