820-IF221.288M-A

IF SAW Filter Part Number Package Application Last Modified 820-IF221.288M-A . TYPE : 20.2 x 12.6 SMD Base Station & Repeater Apr 18, 2007 221.288 MHz Bandpass SAW Filter PART NUMBER : 820-IF221.288M-A .. OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS PARAMETERS Center Frequency Insertion Loss at Fo Source Impedance (single ended)* Load Impedance (single ended)* Bandwidth at -1.0 dB Bandwidth at -3.0 dB Bandwidth at -10.0 dB Bandwidth at -40.0 dB Ultimate Rejection Amplitude Ripple Group Delay Variation (smo 0.5%) Absolute Delay at Fo Temperature Coefficient Minimum 45 Typical 221.288 24.5 50 50 6.86 7.08 7.46 8.04 50 0.7 120 2.41 -0.03 Maximum 26.0 1.2 Units MHz dB ohm ohm MHz MHz MHz MHz dB dBp-p nsec µsec ppm/°C *With Matching Network (Reference Testing Environment Circuit as shown) Modifiy Impedance Values as necessary. . PACKAGE OUTLINE (mm) TESTING ENVIRONMENT PIN Description IN-1,OUT-5,GROUND-2,3,4,6 FREQUENCY RESPONSE Part No.: 820-IF221.288M-A Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map